BEGA 84 253 Handbuch

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung

LIGMAN

LIGMAN DE-20023 Bedienungsanleitung

Installation and Technical Information

BEGA

Due to the dynamic nature of lighting products and the associated technologies, luminaire data on this sheet is subject to change at the discretion of BEGA North America. For the most current technical data, please refer to bega-us.com

BEGA 1000 Bega Way, Carpinteria, CA 93013 (805)684-0533 © copyright BEGA 2022

Overview:

LED Watts: 25.2 W

System Watts: 34.0 W

Controllability: 0-10V, TRIAC, and ELV dimmable

Weight: 20.5 lbs.

Protection Class: IP66

Tools Required:

• 4mm hex head screwdriver

• 13mm hex socket

• Adjustable wrench

Figure 2Figure 1

Figure 3

Area/roadway luminaire - Asymmetric - Twin 84 253

Dimensions

A: 10”

B: 2-3/8”

C: 32”

Maintenance:

Clean regularly with solvent-free cleaner

removing dirt and debris. Do not use high

pressure cleaners.

Replacement Parts

See label inside of xture for LED replacement

part number.

Consult factory for all other replacement

components.

Luminaire Accessories

Please refer to the appropriate accessory installation

sheet for further instruction when applicable.

Mounting Accessories

Please refer to the appropriate accessory installation

sheet for further instruction when applicable.

Updated: 09/22/22

84 253 1 of 2

Notice to Installer:

1. See page 2 for specic product safety warnings.

2. For pole top applications only.

3. Slip ts 3” O.D. poles only.

4. Inner diameter of pole must measure a MINIMUM of 2-1/2” with a MAXIMUM diameter

of 2-3/4

5. LED module and integral driver provided by BEGA.

6. Pole top luminaire supplied with 25 feet of cable to route through pole.

7. Do NOT remove moisture absorption packet from luminaire housing.

8. Fixture should not be opened during installation.

Luminaire 84 253 installation:

1. Loosen hex screw on pole cap and remove pole cap. (Figure 1)

2. Lead luminaire wires into top of pole and through the base of pole or handhole to

make wire connections.

3. Secure luminaire head to pole by tightening 13mm hex nut to engage pole

tter expansion mechanism (Figure 2). Torque - 8.85 ft-lb MAXIMUM.

Note: IF TORQUE ALLOWANCE IS EXCEEDED POLE FITTER CAN BE

DAMAGED AND LUMINAIRE WARRANTY WILL BE VOID.

4. Secure outer 4mm set screw on luminaire housing.

5. To adjust beam direction (up to 15 degrees), undo hex nut and adjust joint (Figure 3).

Be sure teeth are secured into position. BE CAREFUL AS THE FIXTURE WILL DROP

QUICKLY UPON LOOSENING.

6. Replace slip tter cap and tighten cap hex screw.

7. Make supply wiring and luminaire wiring connections inside pole base or handhole:

MAIN VOLTAGE SUPPLY WIRE TO BLACK LUMINAIRE WIRE

NEUTRAL (COMMON) SUPPLY WIRE TO WHITE LUMINAIRE WIRE

GREEN GROUND WIRE TO GREEN LUMINAIRE WIRE

Dimming (if applicable):

DIMMING CONTROL WIRE (+) TO POSITIVE DRIVER DIM CONTROL WIRE

DIMMING CONTROL WIRE (-) TO NEGATIVE DRIVER DIM CONTROL WIRE

Installation and Technical Information

BEGA

Due to the dynamic nature of lighting products and the associated technologies, luminaire data on this sheet is subject to change at the discretion of BEGA North America. For the most current technical data, please refer to bega-us.com

BEGA 1000 Bega Way, Carpinteria, CA 93013 (805)684-0533 © copyright BEGA 2022

Product Safety Warnings:

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

SUITABLE FOR WET LOCATIONS.

MIN 60°C SUPPLY CONDUCTORS.

CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT

BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.

CONVIENT AUX EMPLACEMENTS MOUILLÉS.

LES FILS D’ALIMENTATION 60°C MIN.

Updated: 09/22/22

2 of 2

84 253

Area/roadway luminaire - Asymmetric - Twin 84 253