Belkin F5D7330 Bedienungsanleitung

F5D7330

ADHOC Configuration on two XBOX.

To Use the F5D7330 in Adhoc mode you will need to configure first the Ethernet Bridge on a computer as the

BO cannot access the web interface. Make sure that your computer is equipped with an Ethernet card and

connect the Ethernet Bridge to it.

You will need to make sure that you entered an IP address matching the Ethernet Bridge (192.168.2.225)

To do this right click on my network places and click on property

Then right click on the connection for your Ethernet card and click on properties

Then highlight “internet protocol TCP/IP” and click on properties

Select Use the following IP address on the following screen and enter an IP address in the same range as the

Ethernet bridge in this case 192.168.2.251 and then click on ok and ok again and come back to the desktop.

Software setup of the first Ethernet Bridge.

You need to setup the first Ethernet Bridge in ADHOC mode to be able to set the network correctly. To do this,

the best way is to launch the software, as it will configure the first Ethernet Bridge very simply.

The following is only a reminder of the manual.

Click on setup

Click Next

The software will discover your Ethernet Bridge and show you the config. Click next

Leave the password blank click next

Click next again

Select ADHOC and click next

It will then present you with the wireless configuration settings

Change the SSID to another name in this case we selected HALO. If you leave the name at “ANY” you will get

a conflict later on

It will then give you the opportunity to modify the IP address, you must change the IP address on at least one of

the access point so the best thing is to do it here and leave the other Ethernet Bridge by default.

Avoid the encryption as much as possible as it will slow down your connection if you must; enter a light

encryption (64 bit).

It will then advise you on the change you did on the unit and you can finish

You will then receive a message from the software…

And the configuration will be over.

Setup the se ond Ethernet Bridge

To setup the second Ethernet Bridge, simply unplug the first one from the computer and connect the second

one. (Make sure that the first one is still powered and you can even connect it onto your BO with the

Network cable). You will then easily access the interface of the second F5D7330 by typing the IP in your

browser (192.168.2.225 by default)

In the interface select site survey

You will then see a selection of available Network, select the one you want, in this case HALO and apply the

changes.

Your network will then be highlighted and you will be connected to the other Ethernet Bridge.

You can check the configuration by clicking on the Home button.

From there your two Ethernet bridge are configured and networked on there own, any device connected onto

one of the Ethernet bridge will be connected to the second one as well.

Configuring the XBOX for networking

Swit h on your XBOX without a CD.

You should get this screen, click on settings

Then click on Network settings

Then click on IP addresses

And select the manual configuration an configure

Your address as follow

Then press B until you arrive at this screen and insert the game CD.

Andere Handbücher für F5D7330

Andere Belkin Netzwerk-Router Handbücher

Belkin

Belkin AC 1600 DB Bedienungsanleitung

Belkin

Belkin F6D6230-4 v1 Bedienungsanleitung

Belkin

Belkin F9K1117V2 Bedienungsanleitung

Belkin

Belkin F5D7234-4 Bedienungsanleitung

Belkin

Belkin Wireless G Router Bedienungsanleitung

Belkin

Belkin F1PI242EGAU Referenzhandbuch

Belkin

Belkin F5D7630 Kurzanleitung

Belkin

Belkin F5D7230au4P Bedienungsanleitung

Belkin

Belkin Wireless Gplus Notebook Card Bedienungsanleitung

Belkin

Belkin N+ Bedienungsanleitung

Belkin

Belkin F9K1103 v1 Bedienungsanleitung

Belkin

Belkin F1PI242EGAU Bedienungsanleitung

Belkin

Belkin VISION N1 Bedienungsanleitung

Belkin

Belkin OmniView 5000HQ Bedienungsanleitung

Belkin

Belkin F5D8236V3 Bedienungsanleitung

Belkin

Belkin N Wireless Bedienungsanleitung

Belkin

Belkin 802.11g Wireless Ethernet Bridge Bedienungsanleitung

Belkin

Belkin F5D8233 Bedienungsanleitung

Belkin

Belkin AX3200 Bedienungsanleitung

Belkin

Belkin F1P1210ENAU Referenzhandbuch

Belkin

Belkin VISION N1 Bedienungsanleitung

Belkin

Belkin N Wireless Bedienungsanleitung

Belkin

Belkin F9K1001V3 Bedienungsanleitung

Belkin

Belkin F9K1115V2 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise