Belle Group PORTO SCREED Bedienungsanleitung

- Spare Parts Book

- Bruksanvisning

Operators Manual

Betjene Håndbok

870/20005/1

Signed by: Managing Director - On behalf of BELLE GROUP (SHEEN) UK.

Signature: Le Directeur Général - Pour le compte de la SOCIETE BELLE GROUP (SHEEN) UK.

Medido por: Director Gerente - En nombre de BELLE GROUP (SHEEN) UK.

Assinado por: Director-Geral - Em nome de BELLE GROUP (SHEEN) UK.

Getekend door: Algemeen Directeur - Namens BELLE GROUP (SHEEN) UK.

Uunderskrevetaf: Administrerende direktør – På vegne af BELLE GROUP (SHEEN) UK.

PRODUCT TYPE ................. TYPE DE PRODUIT.............. TIPO DE PRODUCTO.......... TIPO DE PRODUCTO .........

MODEL................................. MODELE............................... MODELO .............................. MODELO..............................

SERIAL No........................... N° DE SERIE ........................ N° DE SERIE........................ NO. DE SÉRIE.....................

DATE OF MANUFACTURE. DATE DE FABRICATION ..... FECHA DE FABRICACIÓN.. DATA DE FABRIC

SOUND POWER LEVEL NIVEAU DE PUISSANCE NIVEL DE POTENCIA NIVEL DE POTÊNCIA

MEASURED......................... SONORE MESUREE............ ACÚSTICA MEDIDO............ DE SOM MEDIDO................

(GUARANTEED).................. (GARANTIE) ......................... (GARANTIZADO)................. (GARANTIDO) .....................

WEIGHT............................... POIDS................................... PESO.................................... PESO ...................................

We, Belle Group Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB, hereby certify that if the product described within this certificate is bought from an

authorised Belle Group dealer within the EEC, it conforms to the following EEC directives: 98/37/EC (This directive is a consolidation of the original machinery directive

89/392/EEC), Electromagnetic Compatibility Directive 89/336/EEC (as amended by 92/31/EEC & 93/68 EEC). The low voltage directive 73/23/EEC, BS EN ISO

12100-1:2003 Safety of machinery and associated harmonised standards, where applicable. Noise emissions conform to directive 2000/14/EC Annex VI, for machines

under article 12 the notified body is AV Technology Limited, AVTECH house, Birdhall Lane, Cheadle Heath, Stockport, Cheshire, SK3 0XU, GB.

Noise Technical Files are held at the Belle Group Head Office address which is stated above.

Nous soussignons, Belle Group Sheen UK, Sheen, Nr Buxton, Derbyshire, SK17 0EU, GB, certifions que si le produit décrit dans ce certificat est acheté chez un

distributeur autorisé Belle Group au sein de la CEE, il est conforme aux normes CEE ci-après: 98/37/CE (Cette norme est une codification des normes de la machine

d'origine 89/392/CEE), Norme compatible pour l'électromagnisme 89/336/CEE (modifié par 92/31/CEE et 93/68/CEE). Caractéristiques basse tension 73/23/CEE, BS EN

ISO 12100-1:2003, Norme de sécurité des machines et des critères associés et configurés, si applicable. Les émissions de bruit sont conformes à la directive

2000/14/EC Annexe VI pour machines , article 12, l’objet mentionné est AV Technology Mimited, AVTECH House, Birhall Lane, Cheadle Heath, Stockport, Cheshire,

SK3 0XU, GB.

Les dossiers techniques sur les émissions sonores des machines sont détenus au siège social de BELLE GROUP à l’adresse ci-dessus.

La Sociedad, Belle Group Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK 17 OEU, GB, por el presente documento certifica que si el producto descrito en este

certificado es comprado a un distribuidor autorizado de Belle Group en la CEE, este es conforme a las siguientes directivas: 98/37/CE de la CEE (Esta directiva

consolida la directiva inicial sobre maquinaria 89/392/CEE), Directiva 89/336 CEE sobre Compatibilidad Electromagnética (según enmiendas 92/31/CEE y 93/68 CEE),

Directiva sobre Bajo Voltaje 73/23/CEE, BS EN ISO 12100-1:2003 de Seguridad de Maquinaria y Niveles armonizados estándares asociados donde sean aplicables.

Emisión de Ruídos conforme a la Directiva 2000/14/CE Anexo VI para máquinas bajo artículo 12 la mencionada unidad está AV Technology Limited, AVTECH House,

Birdhall Lane, Cheadle Heath, Stockport, Cheshire, SK3 OXU, GB.

En La Sede Central de Belle Group existen Archivos Técnicos con contenido referente a Niveles de Ruido.

O signatário, Belle Group Sheen UK, Sheen, Nr Buxton, Derbyshire, SK 0EU, GB, pelo presente, declara que se o produto descrito neste certificado foi adquirido a

um distribuidor autorizado do Belle Group em qualquer país da UE, está em conformidade com o estabelecido nas seguintes directivas comunitárias: 98/37/EC (esta

directiva é uma consolidação da directiva de maquinaria original 89/392/EEC), Directiva de Compatibilidade Electromagnética 89/336/EEC (conforme corrigido pelas

92/31/EEC & 93/68 EEC). A directiva de baixa voltagem 73/23/EEC, BS EN ISO 12100-1:2003 Segurança da maquinaria e às normas harmonizadas afins se aplicáveis.

As emissões de ruído respeitam e estão dentro das directivas para máquinas 2000/14/EC Anexo VI, artigo 12, sendo o organismo notificado AV Technology Limited,

AVTECH house, Birdhall Lane, Cheadle Heath, Stockport, Cheshire, SK3 0XU, GB.

A informação técnica sobre níveis sonoros está disponivel na Sede da Belle Group na morada acima mencionada.

Ondergetekende, Belle Group Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK17 OEU, GB, verklaren hierbij dat als het product zoals beschreven in dit certificaat is

gekocht van een erkende Belle Group dealer binnen de EEG, het voldoet aan de volgende EEG richtlijnen: 98/37/EC (Deze richtlijn is een opvolger van de orginele

Machinerichtlijn 89/392/EEG), Electromagnetische Compatability Richtlijn 89/336/EEG ( geamendeerd door 92/31/EEG & 93/68 EEG). De Laagspannings Richtlijn

72/23/EEG, BS EN ISO 12100-1:2003 Veiligheid van Machines en hieraan gekoppelde geharmoniseerde Standaarden, waar deze van toepassing is. Rumoer emissions

passen voor richtlijn EC Zijgebouw VI , voor toestel onder stuk 12 naar de notified troep zit AV Technology Limited, AVTECH house, Birdhall Lane, Cheadle Heath,

Stockport, Cheshire, SK3 OXU, GB

Worden de Technische Dossiers van het lawaai gehouden op het adres van het Hoofdkantoor van de Groep Belle dat hierboven ' wordt verklaard.

Vi, Belle Group Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB, erklærer hermed, at hvis det i dette certifikat beskrevne produkt er købt hos en autoriseret

Belle Group forhandler i EU, er det i overensstemmelse med følgende EØF-direktiver: 98/37/EF, 73/23/EØF (som ændret ved 93/68/EØF), 89/336/EØF (som ændret ved

92/31/EØF), 93/68/EØF og tilknyttede, harmoniserede standarder, hvor relevant. Støjniveauet er i overensstemmelse med direktiv 2000/14/EF, bilag VI gældende for

maskiner under paragraf 12. Det bemyndigede organ er AV Technology Limited, AVTECH house, Birdhall Lane, Cheadle Heath, Stockport, Cheshire, SK3 0XU,

Storbritanien.

EC DECLARATION OF CONFORMITY / DECLARATION CE DE CONFORMITE /

DECLARACIÓN DE CONFORMIDAD CE / DECLARAÇÃO CE DE CONFORMIDADE /

EG-VERKLARING VAN OVEREENSTEMMING / EF

OVERENSSTEMMELSESERKLÆRING

Ray Neilson

PRODUCTTYPE .................. PRODUKTTYPE...................

MODEL................................. MODEL .................................

SERIENUMMER................... SERIENR. .............................

FABRICAGEDATUM............ FREMSTILLINGSDATO .......

GEMETEN LYDEFFEKTNIVEAU

GELUIDSSTERKTENIVEAU MÅLT....................................

(GEGARANDEERD) ............ (GARANTERET)...................

GEWICHT............................. VÆGT...................................

Unterzeichnet vo: Generaldirektor – Im auftrag von BELLE GROUP (SHEEN) UK.

Firmato da: Amministratore Delegato – Per conto di BELLE GROUP (SHEEN) UK.

Undertecknat: V.D. – På vägnar av BELLE GROUP (SHEEN) UK.

Signatur: Managing Director - På vegne av SOCIETE BELLE GROUP (SHEEN) UK.

Allekirjoitus: Toimitusjohtaja - BELLE GROUP (SHEEN) UK: n puolesta.

Podpisa³: Dyrektor Zarządzający – w imieniu BELLE GROUP (SHEEN) UK

PRODUKTTYP..................... TIPO PRODOTTO ................ PRODUKTTYP..................... PRODUKTTYP.....................

MODELL .............................. MODELLO ............................ MODELL............................... MODELL ..............................

SERIENNR........................... SERIE N°.............................. SERIE NR. ........................... SERIE NR. ..........................

HERSTELLUNGSDATU ...... DATA DI FABBRICAZIONE.. TILLVERKNINGSDATUM..... PRODUKSJONSDATO........

SCHALLLEISTUNGSPEGEL LIVELLO POTENZA LJUDSTYRKA LYDKRAFTNIVÅ

GEMESSEN ......................... SONORA MISURATA ........... UPPMÄTT............................. MÅLT ...................................

(GARANTIERT).................... (GARANTITA)....................... (GARANTERAD) .................. (GARANTERT) ....................

GEWICHT............................. PESO .................................... VIKT...................................... VEKT....................................

Wir, Belle Group Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, Großbritannien, bestätigen hiermit, dass das in diesem Zertifikat beschriebene Produkt,

wenn es von einem autorisierten Belle Group Händler innerhalb der europäischen Gemeinschaft gekauft wurde, folgenden EG-Richtlinien entspricht: 98/37/EG, 73/23/EG

(geändert durch 93/68/EG), 89/336/EG (geändert durch 92/31/EG), 93/68/EG und, wenn zutreffend, den harmonisierten Normen. Geräuschemissionen entsprechen der

Richtlinie 2000/14/EG, Anhang VI, für Maschinen unter Artikel 12: die benannte Stelle ist AV Technology Limited, AVTECH House, Birdhall Lane, Cheadle Heath,

Stockport, Cheshire, SK3 0XU, GB.

Geräuschtechnische Dokumente stehen in unserer Zentrale unter obig angegebener Adresse zur Verfügung.

Il Gruppo Belle Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB, certifica che il prodotto descritto nel presente certificato è acquistato da un concessionario

autorizzato del gruppo Belle nell'ambito CEE e che è pienamente conforme alle seguenti direttive CEE: 98/37/EC, 73/23/EEC (emendamento 93/68/CEE), 89/336/EEC

(emendamento 92/31/CEE), 93/68/CEE e relativi standard armonizzati. Livelli acustici sono in conformità con la direttiva 2000/14/EC Annex VI per macchine coperte dall’

articolo 12. L’ente di riferimento è AV Technology Limited, AVTECH house, Birdhall Lane, Cheadle Heath, Stockport, Cheshire, SK3 0XU, GB.

Dati tecnici relativi ai livelli acustici sono disponibili su richiesta dalla sede madre Belle Group al sopra citato indirizzo.

Undertecknade, Belle Group Sheen UK, Sheen, Nr Buxton, Derbyshire, SK17 0EU, Storbritannien, intygar härmed att en produkt beskriven i detta certifikat som

köps från en godkänd Belle Group återförsäljare inom EU stämmer överens med följande EG-direktiv: 98/37/EG, 73/23/EG (ändrat genom 93/68/EEC), 89/336/EG

(ändrat genom 92/31/EG), 93/68/EG och tillhörande harmoniserade standarder i tillämpliga fall. Buller nivån överensstämmer med Direktiv 2000/14/EC Bilaga VI gällande

maskiner under artikel 12, den aviserade organisationen är AV Technology Limited, AVTECH house, Birdhall Lane, Cheadle Heath, Stockport, Cheshire, SK3 0XU,

Storbritannien.

Teknisk dokumentation vad gäller test av maskiners ljud/bullernivå finns dokumenterad hos Belle-Groups huvudkontor i Sheen, England.

Vi, Belle Group Sheen UK, Sheen, Nr Buxton, Derbyshire, SK17 0EU, GB, bekrefter med dette at det produktet som står beskrevet i denne erklæringen er kjøpt fra en

autorisert Belle Group forhandler innen EØF, og at det oppfyller følgende direktiver: 98/37/CE dette direktivet er et sammendrag av det opprinnelige maskindirektivet

89/392/EØF), Det elektromagnetisk kompatabiltets-direktivet 89/336/EØF (som endret av 92/31/EØF og 93/68/EØF). Lavspenningsdirektivet 73/23/EØF, BS EN ISO

12100-1:2003, Sikkerhet til maskineri og tilhørende harmoniserte standarder, hvor atuelt. Støyemisjon er i samsvar med direktiv 2000/14/EC, vedlegg VI, for maskiner.

Organet som skal informeres under artikkel 12 er

AV Technology Limited, AVTECH House, Birhall Lane, Cheadle Heath, Stockport, Cheshire, SK3 0XU, GB.

Lydtekniske filer er arkivert hos Bell Group Hovedkontor med adresse som nevnt ovenfor.

Me, Belle Group Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB, ilmoitamme täten, että jos tässä todistuksessa kuvattu tuote on ostettu valtuutetulta Belle

Groupin myyjältä ETY:n alueella, se on yhdenmukainen seuraavien ETY-direktiivien kanssa: 98(37/EY (Tämä direktiivi on yhdistelmä alkuperäisestä konedirektiivistä

89/392/ETY, sähkömagneettisen yhteensopivuuden direktiivistä 89/336/ETY, korjauksineen 92/31/ETY ja 93/68/ETY), matalajännitedirektiivistä 73/23/ETY,

koneturvallisuusstandardista BS EN ISO 12100-1:2003 ja siihen liittyvistä yhdenmukaistetuista standardeista, tapauksen mukaan. Melumittaus mittaus on laadittu

direktiivin 2000/14/EC Kohdan VI artiklan 12 mukaisille koneille mukaan. Mittauksen suorittaja on AV Technology Limited, AVTECH House, Birdhall Lane, Cheadle

Heath, Stockport, Cheshire, SK3 0XU, GB.

Melumittausten teknilliset arvot ovat saatavana Belle Group pääkonttorin ylläolevasta osoitteesta.

My, Belle Group Sheen UK, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, Wielka Brytania, niniejszym poświadczamy, iż produkt opisany w tym świadectwie został

zakupiony od autoryzowanej Belle Group w UE i jest zgodny z następującymi dyrektywami EU: 98/37/EC (ta dyrektywa to konsolidacja oryginalnej dyrektywy na temat

maszyn 89/392/EEC), Dyrektywą zgodności elektromagnetycznej 89/336/EEC (z poprawkami wniesionymi przez 92/31/EEC oraz 93/68/EEC), Dyrektywą w sprawie

niskich napięć 73/23/EEC, BS EN ISO 12100-1:2003 Bezpieczeństwo maszyn i związane normy harmonizacyjne, tam gdzie to ma zastosowanie. Poziom hałasu jest

zgodny z Dyrektywą 2000/14/EC Zalącznik VI, organizacja zawiadamiana (odnośnie zgodności) to AV Technology Limited, AVTECH house, Birdhall Lane, Cheadle

Heath, Stockport, Cheshire, SK3 0XU, Wielka Brytania.

Informacje Techniczne dotyczące poziomu hałasu są przechowywane w Belle Group – adres powyżej.

EGKONFORMITÄTSERKLÄRUNG / DICHIARAZIONE CE DI CONFORMITÁ /

EG-VERKLARING VAN OVEREENSTEMMING /

EC SAMSVARSERKLÆRING / EY-YHDENMUKAISUUSILMOITUS / DEKLARACJA

ZGODNOSCI Z PRZEPISAMI UE

Ray Neilson

TUOTETYYPPI..................... TYP PRODUKTO..................

MALLI................................... MODEL .................................

VALMISTUSNRO................. Nr SERII................................

VALMISTUSPÄIVÄ.............. DATAPRODUKCJI ...............

ÄÄNENVOIMAKKUUDEN POZIOM MOCY

TASO MITATTU...................

DŹ

KU ZMIERZONY ......

(TAATTU) ............................. (GWARANTOWANY)............

MASSA................................. WAGA...................................

How To Use This Manual

Before you operate or carry out any maintenance on this machine YOU MUST READ and STUDY

this manual.

WARNING

The product can be at risk. The machine or yourself can be damaged or injured if procedures are not

carried out in the correct way.

CAUTION

The life of the operator can be at risk.

WARNING

Contents

KNOW how to safely use the unit’s controls and what you must do for safe maintenance. (NB Be sure that you know how to switch the

machine off before you switch on, in case you get into difﬁculty.)

ALWAYS wear or use the proper safety items required for your personal protection. If you have ANY QUESTIONS about the safe use

or maintenance of this unit, ASK YOUR SUPERVISOR OR CONTACT: BELLE GROUP (UK): +44 (0) 1298 84606

How to use this manual..............................................................................................................................................................................4

Warning......................................................................................................................................................................................................4

Machine Description...................................................................................................................................................................................5

Technical Data ...........................................................................................................................................................................................5

General Safety ...........................................................................................................................................................................................6

Health and Safety.......................................................................................................................................................................................6

Environment ...............................................................................................................................................................................................6

Pre-Start Checks........................................................................................................................................................................................7

Start & Stop Procedure..............................................................................................................................................................................7

Preparing the Porto Screed for Use...........................................................................................................................................................7

Operating Instructions................................................................................................................................................................................8

Service & Maintenance ..............................................................................................................................................................................8

Trouble Shooting Guide .............................................................................................................................................................................9

Warranty.....................................................................................................................................................................................................9

Declaration of Conformity...........................................................................................................................................................................2

Belle Group reserves the right to change machine speciﬁcation without prior notice or obligation.

This manual has been written to help you operate and service the ‘Porto Screed’ safely. This manual is intended for dealers and

operators of the ‘Porto Screed’.

Foreword

The ‘Machine Description’ section helps you to familiarise yourself with the machine’s layout and controls.

The ‘Environment’ section gives instructions on how to handle the recycling of discarded apparatus in an environmentally friendly way.

The ‘General Safety’ and ‘Health and Safety’ sections explain how to use the machine to ensure your safety and the safety of the

general public.

The ‘Preparing the Porto Screed for use’ section helps you with the setting up of the machine before use, and the types of

expendables available for the machine.

The ‘Start and Stop’ procedure helps you with starting and stopping the machine.

The ‘Trouble Shooting’ guide helps you if you have a problem with your machine.

The ‘Servicing’ section is to help you with the general maintenance and servicing of your machine.

The ‘Warranty’ sectiondetails the nature of the Warranty cover and the claims procdedure.

Directives with regard to the notations.

Text in this manual to which special attention must be paid are shown in the following way:

Machine Description

Technical Data

1. Throttle lever.

2. Choke lever.

3. Fuel ON / OFF lever.

4. Engine ON / OFF switch.

5. Air Filter Housing.

6. Fuel Tank.

7. Recoil Starter Handle.

8. Engine oil ﬁller / dipstick.

9. Engine Oil Drain

10. Belt Guard.

11. Operating Handle.

12. Exhaust.

13. Clamp Bracket.

Model Porto Screed

A - Machine Height (mm) 440

B - Machine Length (mm) 1040

C - Machine Width (mm) 704

Engine Power - Honda Petrol (Hp) 4

Engine RPM 3600

Machine Weight (Kg) 49

Vibrator Force (KN) 3.0

Frequency (Hz) 80

One Man Operation - Centre Handle

3 Axis Vibration Figure (m/sec2) 9.89

Usage Time (Mins) 38

Two Man Operation - End Handles

3 Axis Vibration (m/sec2) 5.34

Usage Time (Mins) 132

General Safety

For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following

safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.

If you are unsure about the safe and correct use of the ‘Porto Screed’, consult your supervisor or Belle Group.

Improper maintenance can be hazardous. Read and Understand this section before you perform any

maintenance, service or repairs.

CAUTION

Fuel is ﬂammable. It may cause injury and property damage. Shut down the engine, extinguish all open

ﬂames and do not smoke while ﬁlling the fuel tank. Always wipe up any spilled fuel.

WARNING

• This equipment is heavy and must not be lifted single-handedly, either GET HELP or use suitable lifting equipment.

• Cordon off the work area and keep members of the public and unauthorized personnel at a safe distance.

• Personal Protective Equipment (PPE) must be worn by the operator whenever this equipment is being used (see Health & Safety).

• Make sure you know how to safely switch this machine OFF before you switch it ON in case you get into difﬁculty.

• Always switch OFF the engine before transporting, moving it around the site or servicing it.

• During use the engine becomes very hot, allow the engine to cool before touching it. Never leave the engine running and

unattended.

• Never remove or tamper with any guards ﬁtted, they are there for your protection. Always check guards for condition and security, if

any are damaged or missing, DO NOT USE THE MACHINE until the guard has been replaced or repaired.

• Do not operate the MACHINE when you are ill, feeling tired, or when under the inﬂuence of alcohol or drugs.

Fuel Safety.

• Before refuelling, switch off the engine and allow it to cool.

• When refuelling, DO NOT smoke or allow naked ﬂames in the area.

• Spilt fuel must be made safe immediately, using sand. If fuel is spilt on your clothes, change them.

• Store fuel in an approved, purpose made container away from heat and ignition sources.

Health & Safety

Vibration

Some vibration from the compaction operation is transmitted through the handle to the operator’s hands. The Belle Group Porto-Screed

has been speciﬁcally designed to reduce hand/arm vibration levels. Refer to Technical Data section for vibration levels and usage times

(recommended maximum daily exposure time). DO NOT exceed the maximum usage times.

PPE (Personal Protective Equipment).

Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped

footwear (with anti-slip soles for added protection). Wear clothing suitable for the work you are doing.Always protect skin from contact

with concrete.

Dust.

The compaction process can produce dust, which may be hazardous to your health. Always wear a mask that is suited to the type of

dust being produced.

Fuel.

Do not ingest fuel or inhale fuel vapors and avoid contact with your skin. Wash fuel splashes immediately. If you get fuel in your eyes,

irrigate with copious amounts of water and seek medical attention as soon as possible.

Exhaust Fumes.

Do not operate your Porto-Screed indoors or in a conﬁned space, make sure the work area is adequately ventilated.

Safe Disposal.

Instructions for the protection of the environment.

The machine contains valuable materials. Take the

discarded apparatus and accessories to the relevant

recycling facilities.

Component Material

Operator Handle Steel, Rubber and Polyurethane.

Frame Steel

Engine Aluminium

Belt Guard Polypropylene

Various parts Steel & Rubber

Environment

The exhaust fumes produced by this equipment are highly toxic and can kill!

CAUTION

Start and Stop Procedure

Honda GX120 Petrol Engine

1. Open the fuel tap by moving the fuel ON / OFF lever fully to the right.

2. If starting the engine from cold, set the choke ON by moving the choke lever fully to

the left. If restarting a warm engine, the choke is usually not required, However, if the

engine has cooled to a degree, partial choke may be required.

3. Turn the engine ON / OFF switch clockwise to the ‘I’ position.

4. Set the throttle to the idle position by moving the throttle lever fully to the right.

5. Taking a ﬁrm hold of the control handle with one hand, grasp the recoil starter handle

with the other. Pull the recoil starter until engine resistance is felt, then let starter

return.

6. Taking care not to pull the starter’s rope fully out and pull the starter handle briskly.

7. Repeat until the engine ﬁres.

8. Once the engine ﬁres gradually set the choke lever to the OFF Position by moving it

to the right.

9. If the engine fails to ﬁre after several attempts, follow the trouble-shooting guide.

10. To stop the engine, turn the engine ON / OFF switch anti-clockwise to the ‘0’ position.

11. Turn the fuel off.

Pre-Start Checks

Pre start-up inspection.

The following Pre-start-up inspection must be performed before the start of each work

session or after every four hours of use, whichever is ﬁrst. Please refer to the service

section for detailed guidance. If any fault is discovered, the Porto Screed must not be used until the fault is rectiﬁed.

1. Thoroughly inspect the Porto Screed for signs of damage. Make sure that the belt guard is secure before using the machine.

2. Check hoses, ﬁller openings, drain plugs and any other areas for signs of leakage. Fix any leaks before operating.

3. Check the engine oil level and top up as necessary.

4. Check the engine fuel level and top up as necessary.

5. Check for fuel and oil leaks.

Preparing the Porto Screed For Use

Preparing the Porto Screed for use.

1. Extending aluminum beams or ﬁxed length beams can be supplied with the machine. A variety of ﬁxed length beams are available.

Contact the sales department for details. The extending beams will extend from 3.25 to 5.2 meters.

2. To ﬁt the Porto Screed to the aluminum extending beams, ﬁrst set the beams to the required length. To set the beams, loosen the

four top setscrews on the tie bars, and slide the beams out to length. Once the length has been set, tighten the four setscrews on

the top of the tie bars. the beams length is now ﬁxed. To ﬁx the power unit to the extending beams, remove the clamp brackets

from the power unit and place the power unit, approximately central, onto the beams. Then reattach the clamps to the power unit

using the single square hole on the clamp for the bolt (refer to picture). Then tighten the ﬁxing handles, making sure that the

clamps are still in the correct position. The unit should now be ready for use.

3. To ﬁt the Porto Screed to the ﬁxed length beams, ensure that the beams are complete with end frames and that the end frames

are securely attached. Remove the clamp brackets from the power unit and then place the power unit, approximately central, onto

the beams. Invert the clamp brackets and reattach them to the power unit using the slotted hole on the clamp for the bolt (refer to

picture). Then tighten the ﬁxing handles, ensuring that the clamps are securely attached and still in position on the beams. The

unit should now be ready for use.

Clamp position for ﬁxed beams. For extending beams, Rotate the clamp 180°.

Note:

Ensure that the power unit is securely clamped to the beams.

If using extending beams, ensure that the length of the extending beams is securely

ﬁxed before using the machine.

Part numbers for the ﬁxed length or extending beams can be found in the parts

section.

If you are in any doubt as to the setting up and use of the Porto Screed, don’t

hesitate to contact your local agent or Belle Group.

Servicing

MAINTENANCE

The Belle Group Porto Screed is designed to give many years of trouble free operation. It is, however, important that the simple

regular maintenance listed in this section is carried out. It is recommended that an approved Belle Group dealer carries out all major

maintenance and repairs. Always use genuine Belle Group replacement parts, the use of spurious parts may void your warranty.

Before any maintenance is carried out on the machine, switch off the engine and disconnect the HT lead from the sparkplug.

Always set the Porto Screed on level ground to ensure any ﬂuid levels will be correctly read.

Only use recommended oils (see chart below).

Running In Period

When the Porto Screed is ﬁrst used from new, the engine oil must be changed after the initial running in period (see engine manual

for full detail). The belt tension should be checked after 4 hours use. If a new belt has been ﬁtted, it must initially be checked after 30

minutes of use.

Drive Belt.

Remove the belt guard then check the belt tension by placing light ﬁnger pressure on the top of the belt, as near central between

the engine drive and drive pulley. The belt should deﬂect by a maximum of 4mm. If the belt tension requires adjustment, loosen the

four nuts holding the bearings in position. Slide the bearings away from the engine and retighten the four nuts. Once set, check the

belt tension a second time. Then check the pulley alignment. If the alignment is incorrect, loosen the taperlock bushes and move the

pulley to suit. Once the pulley is aligned, retighten the taperlock bushes. Finally, replace the belt guard ensuring it is correctly and

securely ﬁtted.

Routine Maintenance after ﬁrst ﬁrst month 3 month 6 month

4 hours / 20 h / 50 h / 100 h

Engine Oil Check Level 9

Change 99

Air Filter Check Condition 99

Clean / Replace 9

Spark Plug Check / Clean 9

Drive Belt Tension 99

Oil / Fuel Type & Quantity - Spark Plug Type

Oil type Quantity Fuel Type Capacity Spark Plug Electrode

(Litre) (Litre) Type Gap (mm)

Petrol Honda GX120 S.A.E. 10W 30 0.6 Unleaded 2.6 BM6ES or 0.7 - 0.8

BMR6EA

Operating Instructions

• Take the Porto Screed to where it is required.

• NEVER leave the engine running whilst transporting or moving the Porto Screed, even if it is only a short distance.

Note that the machine is a two man lift operation. Never attempt to carry the machine on your own. Always seek assistance with

lifting and transporting the Porto Screed.

• Having carried out the checks listed in the ‘pre start’ section and prepared the Porto Screed for use, you may

start the engine.

The Porto Screed is ﬁtted with a direct drive system. The machine will vibrate at idle speed. To set the Porto Screed for maximum

vibration, set the throttle to maximum.

• Set the throttle to maximum and use the control handle to gently pull the Porto Screed.

NEVER push the Porto Screed, ALWAYS gently pull the machine. This will ensure that you have a consistent ﬁnish on the surface.

Never force the machine, always allow it to travel at its own pace.

Always make sure that no person or obstruction is in your line of travel. Watch your step to avoid tripping.

USE extreme caution and be observant when working in close quarters or congested areas.

• To stop the Porto Screed, follow the ‘Start / Stop Procedure’ section.

Hints on Concrete Screeding.

1. Concrete should be placed approximately 1” higher than the formwork over the whole bay area.

2. With the engine running the machine will vibrate along the bay with the vibrating unit leading. The Porto Screed can be supplied

with two end handles or rope handles which are attached to the end frames. These are for two man operation of the porto screed.

The machine will travel with its own momentum with only a little assistance from the operator.

3. A surcharge of 1” of concrete should be maintained in front of each beam at all times. Any surcharge over 1” must be shovelled or

raked away.

4. If a second pass is required the Porto-Screed should be guided quickly over the slab without stopping to avoid ridges.

Troubleshooting Guide

Problem Cause Remedy

Engine will not start. No fuel. Open fuel tap.

Fill fuel tank.

Engine switched off. Switch engine on.

Spark plug fouled. Clean and reset plug gap.

Engine cold. Close choke.

Engine ﬂooded. Open choke, fully open throttle, pull recoil starter until engine ﬁres.

Engine still will not start Major Fault. Contact Agent or Belle Group.

Unit will not vibrate. Belt tension incorrect. Adjust belt tension.

Belt Broken. Replace Belt.

Excentric shaft damaged / Broken. Replace excentric shaft.

Engine running but beams Incorrectly attached to beams. Re-attach to beams correctly.

not vibrating.

Your new Belle Group Porto Screed is warranted to the original purchaser for a period of one-year (12 months) from the original date

of purchase. The Belle Group warranty is against defects in design, materials and workmanship.

The following are not covered under the Belle Group warranty:

1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a result of failure to follow assembly,

operation or user maintenance instructions.

2. Alterations, additions or repairs carried out by persons other than Belle Group or their recognized agents.

3. Transportation or shipment costs to and from Belle Group or their recognized agents, for repair or assessment against a warranty

claim, on any machine.

4. Materials and/or labor costs to renew, repair or replace components due to fair wear and tear.

The following components are not covered by warranty.

· Drivebelt/s

· Engine air ﬁlter

· Engine spark plug

Belle Group and/or their recognized agents, directors, employees or insurers will not be held liable for consequential or other

damages, losses or expenses in connection with or by reason of or the inability to use the machine for any purpose.

Warranty Claims

All warranty claims should ﬁrstly be directed to Belle Group, either by telephone, by Fax, by Email, or in writing.

For warranty claims:

Tel: +44(0) 1538 380000 Fax: +44(0) 1538 380038 Email : [email protected]

Write to:

Belle Group Warranty Department,

Unit 5 Bode Business Park

Ball Haye Green,

Leek,

Staffordshire,

ST13 8BW.

England.

Warranty

Om denne bruksanvisningen

Om denne bruksanvisningen ..................................................................................................................................................................10

Advarsel................................................................................................................................................................................................... 10

Beskrivelse av maskinen .........................................................................................................................................................................11

Tekniske data ..........................................................................................................................................................................................11

Generell sikkerhet ...................................................................................................................................................................................12

Helse og sikkerhet ...................................................................................................................................................................................12

Miljøet ......................................................................................................................................................................................................12

Kontroller før start ...................................................................................................................................................................................13

Start- og stopp-prosedyre.........................................................................................................................................................................13

Klargjøre Porto Screed for bruk ..............................................................................................................................................................13

Driftsinstruksjoner ....................................................................................................................................................................................14

Service og vedlikehold ............................................................................................................................................................................14

Feilsøking ................................................................................................................................................................................................15

Garanti .....................................................................................................................................................................................................15

Samsvarserklæring ...................................................................................................................................................................................3

Belle Group forbeholder seg retten til å endre maskinens spesiﬁkasjoner uten foregående varsel eller andre forpliktelser.

Denne bruksanvisningen er skrevet for å hjelpe deg med å drive og vedlikeholde ’Porto Screed’ på en sikker måte. Den er beregnet på

forhandlere og operatører.

Forord

Avsnittet ‘Beskrivelse av maskinen’ bidrar til å gjøre deg fortrolig med maskinens konﬁgurasjon og betjeninger.

Avsnittet ‘Miljø’ inneholder instrukser om hvordan du resirkulerer kasserte apparater på en miljøvennlig måte.

Avsnittene ‘Generelle sikkerhetsinstrukser’ og ‘Helse og sikkerhet’ forklarer hvordan du bruker maskinen til å garantere din egen

og andres sikkerhet.

Avsnittet ‘Klargjøre Porto Screed for bruk’ hjelper deg med å sette opp maskinen før bruk, og typen forbruksartikler som er

tilgjengelige for maskinen.

‘Start- og stopprosedyren’ hjelper deg med å starte og stoppe maskinen.

‘Feilsøking’ hjelper deg hvis du har et problem med maskinen.

Avsnittet ‘Vedlikehold’ forklarer generelle vedlikeholds- og reparasjonsprosedyrer.

Avsnittet ‘Garanti’ forklarer garantidekningen og fremgangsmåten ved eventuelle krav.

Forklaringer til teksten i bruksanvisningen:

Tekst i denne bruksanvisningen som man må være spesielt oppmerksom på, er angitt på følgende måte:

Produktet kan være forbundet med fare. Du risikerer å skade deg selv eller maskinen hvis

prosedyrene ikke utføres riktig.

OBS

Operatørens liv er i fare.

ADVARSEL

Innhold

VIT hvordan du trygt bruker denne enhetens betjeninger og hva du må gjøre for sikker vedlikehold. (Merk: Forviss deg om at du vet

hvordan du skal slå maskinen av før du slår den på, dersom det oppstår problemer).

Bruk ALLTID egnet sikkerhetsutstyr for din personlige beskyttelse. Hvis du har SPØRSMÅL angående sikker bruk eller sikkert

vedlikehold av denne enheten, bør du HENVENDE DEG TIL DIN SJEF ELLER TA KONTAKT MED OSS:

BELLE GROUP (UK): +44 (0)1298 84606

Før du bruker eller utfører vedlikehold på denne maskinen MÅ DU HA LEST denne bruksanvisningen

GRUNDIG.

ADVARSEL

Inhaltsverzeichnis

Sprachen:

Andere Belle Group Baumaschinen Handbücher

Belle Group

Belle Group EASY SCREED 200 Bedienungsanleitung

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1400A Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung