Benefit ESB440 Bedienungsanleitung

Benefit ESB440

Bike

91104

I-6 Screwdriver(1)

91104

NO.I-1 T-shape knob M8*65L(1)

I-8 Box Spanner(1)

I-7 Allen Key(1)

I-5 Acorn Nut for M8 Bolt (4)

I-3 Carriage Bolt M8*55MM (4)

I-4 Curved Washer 8* 19*2t(4)

EXPLODE DRAWING

COMPLETE BIKE ASSEMBLY

PARTS LIST

No. Description Spec. QTY

A,A-1 Computer and screw 1SET

B-1 Cap for handlebar 2PCS

B-2 Hand pulse 2PCS

B-3 Foam grip 2PCS

B-4 Hand pulse wire 1PCS

B-5 Handlebar 1PCS

C-1 Handlebar post 1PCS

C-2 Sensor wire (Upper) 1PCS

C-3 Tension control w/upper cable 1PCS

D-1 Front stabilizer 1PCS

D-2 End cap (Left) 1PCS

D-3 End cap (Right) 1PCS

D-4 Screw 3/16" 2PCS

E-1 Resistant screws M8xP1.0x20L 2PCS

E-2 Adjustable knob 1PCS

E-3 Bearing 2PCS

E-4 Belt 1PCS

E-5 Plastic sleeve 1PCS

E-6 Sensor box 1PCS

E-7 Sensor holder 1PCS

E-8 Screw M4x10L 1PCS

E-9 Chain cover(Left) 1PCS

E-10 Chain cover (Right) 1PCS

E-11 Screw 3/16″6PCS

E-12 Screw M4x50L 6PCS

E-13 Tension control wire (Down) 1PCS

E-14 Cover for handlebar post 1PCS

E-15 C-ring φ17 1PCS

E-16 Flat washer φ17.5xφ25x0.3t 1PCS

E-17 Wave washer φ17.5xφ25x0.3t 1PCS

E-18 Crank (Left) 1PCS

E-19 Crank (Right) 1PCS

E-20 Main frame 1PCS

E-21 Allen bolt M8*P1.25*16L 4PCS

E-22 Semi-circular washer φ8xφ19x2t 4PCS

E-23 Pedal 1PCS

E-24 Seat 1PCS

G-1 Rear stabilizer 1PCS

G-2 End cap for rear stabilizer 2PCS

G-3 Adjustable cap for rear stabilizer 2PCS

H-1 Seat slider 1PCS

H-2 Flat washer φ14.3xφ25x2.0t 1PCS

H-3 Knob for seat slider 1PCS

H-4 Fixing screw bracket 1PCS

H-5 Cap for seat slider 2PCS

I-1~I-8 Bolts & nuts pack 1SET

K-1 Hex. Bolt M8xP1.25x12Lx5t 3PCS

K-2 Pulley wheel 1PCS

K-3 Bushing φ22xφ17x7.5mmL 1PCS

K-4 Axle 1PCS

L-1~L-13 Flywheel set 1SET

M Magnetic brake set 1SET

M-1 Hex. Bolt M6xP1.0*16L 2PCS

M-2 Flat washer φ6xφ13x1t 2PCS

M-3 Spring washer φ6 2PCS

N-1~N-10 Idler wheel 1SET

ASSEMBLY INSTRUCTION

STEP 1

Using box spanner install the front stabilizer (D-1) with the main frame by using 2 carriage bolts

(I-3), flat washers (I-4) and nuts (I-5). Make sure the transportation wheels are in correct

direction.

Install the rear stabilizer (G-1) with the main frame by using 2 carriage bolts (I-3), flat washers

(I-4) and nuts (I-5).

Assemble the R/L pedal (E-23) onto the crank arm (E-18) by using screwdriver.

I-3 Carriage Bolt M8*55MM (4)

I-4 Curved Washer 8* 19*2t(4)

I-5 Acorn Nut for M8 Bolt (4)

Box Spanner

STEP 2

Assemble the seat (E-24) to the slider (H-1). The slider can be adjusted in different angles.

Tighten the two Nuts under the Seat using a screwdriver. In addition, the Slider can be adjusted

in horizontal level by loosening the Knob.

Insert the seat post (H) into the main frame, then choose the desired position and tighten the

knob. Be sure the adjustable knob (E-2) is always securely fastened

Remarks: When you have chosen a desired position, tighten the seat post knob until you hear a

“click”.

Screwdriver

Box Spanner

STEP 3

Please remove the allen bolt (E-21) and semi-circular washers (E-22) from the main frame (E-20)

Take the handlebar post cover (E-14) and pass it through handlebar post (C-1).

Connect the Upper sensor wire (C-2) and Down sensor wire (E-6).

Connect the upper tension control wire (C-3) and down tension control wire (E-13).

Insert the handlebar post (C-1) to the main frame with semi-circular washers (E-22) and

allen bolt (E-21) with allen key (I-7).

Remarks: Do not screw of the allen bolt and semicircle washers too firm at one time. It is better

to fix the four sets firmly at the same time because it helps you to change angles and to fix more

easily.

I-7 Allen Key(1)

STEP 4

Assembly the handlebar (B-5) onto the handlebar post (C-1).

Place the plastic cover (I-2) on the handlebar (B-5). Insert the T- knob (I-1) into the metal cover.

Make sure it is tightened very well.

Pass the hand-pulse wire (B-4) through the handlebar post hole.

NO.I-1 T-shape knob M8*65L(1)

NO. I-2 Plastic cover

Inhaltsverzeichnis

Andere Benefit Heimtrainer Handbücher

Benefit

Benefit B425 91105 Bedienungsanleitung

Benefit

Benefit S420 FRW Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

Weslo

Weslo Vector 302 Kurzanleitung

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Pro-Form

Pro-Form 345 Zlx Bike Benutzerhandbuch

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung