Table of ontents
6 MicroPolar 2 (++) LB 567
4.4.4
Installing the Evaluation Unit 56
4.4.5
Connecting the HF Cable 56
4.5
Connecting the Evaluation Unit 56
4.5.1
Pin Configuration of the Connector Strip 57
4.5.2
Digital Outputs, Relay 59
hapter 5. Service instructions 61
5.1
General Information 61
5.2
Wear Parts 61
5.3
Instrument Cleaning 61
5.4
Battery 62
5.5
Fuse Replacement 62
hapter 6. Technical Data 63
6.1
Technical Data Evaluation Unit 63
6.2
Technical Data Sensors 66
6.3
Technical Data Horn and Spiral Antennas 67
6.4
Technical Data Measuring Chute 68
6.5
Technical Data HF Cable 69
6.6
Format of Serial Data Output RS232 and RS485 70
hapter 7. ertificates 71
7.1
EC Declaration of Conformity 71
7.2
Frequency License 72
hapter 8. Technical Drawings 73
8.1
Dimensions Dra ings Evaluation Unit Wall Housing 73
8.2
Electrical Wiring Diagram 74
8.3
Dimensional Dra ings Flo Cells 75
8.3.1
Type LB 3543-11 MP, nominal idth 50 mm, options 75
8.3.2
Type LB 3543-11 MP, nominal idth 50 mm,
ith ASA flange adapter 76
8.3.3
Type LB 3543-11 MP, nominal idth 50 mm, adapter 77
8.3.4
Type LB 3547-11 MP, nominal idth 65 mm, options 78
8.3.5
Type LB 3547-11 MP, nominal idth 65 mm,
ith ASA flange adapter 79
8.3.6
Type LB 3545-11 MP, nominal idth 80 mm 80
8.3.7
Type LB 3545-11 MP, nominal idth 80 mm,
ith ASA flange adapter 81
8.3.8
Type LB 3544-11 MP, nominal idth 100 mm, options 82
8.3.9
Type LB 3544-21 MP, nominal idth 100 mm
(DN100/PN16) 83
8.3.10
Type LB 3544-21 MP, nominal idth 100 mm
(DN100/PN16), ith ASA flange adapter 84
8.3.11
Type LB 3548-11 MP, nominal idth 150 mm 85
8.3.12
Type LB 3548-11 MP, nominal idth 150 mm,
ith ASA flange adapter 86
8.4
Dimensional Dra ings Horn and Spiral Antennae 87
8.4.1
Horn Antenna and Horn Antenna Holder 87
8.4.2
Spiral antenna 89
8.5
Installation Proposal at the Conveyor Belt 90
8.6
Installation Proposal at the Measuring Chute 91
