BESAFE IZI COMFORT ISOFIX Bedienungsanleitung

GROUP

9-18 kg

WEIGHT

9m-4y

AGE

USER MANUAL

FORWARD-FACING

ECE R44 04

Thank you for choosing BeSafe iZi Comfort ISOﬁx.

Contents

Vital information

BeSafe has developed this seat with much care, to protect your

child during the next phase of her or his life.

Vital information 3

Preparing to install 4

Forward-facing ISOﬁx installation 5

Removing the seat 7

Forward-facing belt installation 8

Removing the seat 10

Positioning of the child 11

Sleeping position 12

Removing and reﬁtting the cover 13

Cleaning instructions 15

Warning: potential misuse 15

Important advice 17

Guarantee 18

Point of sale information 19

It is NOT ALLOWED to mount the seat in a front•

passenger seat WITH AN ACTIVATED AIRBAG.

iZi Comfort ISOﬁx can be installed forward-facing•

with the ISOﬁx anchorage in a car equipped with

ISOﬁx anchorage points.

iZi Comfort ISOﬁx can be installed forward-facing with a•

3-point car belt, approved to UN/ECE Regulation No. 16 or

other equivalent standards.

iZi Comfort ISOﬁx is approved in group 1, forward-facing•

from 9-18 kg.

Read the car list to ﬁnd out whether your car model is•

approved to use the seat.

The harness straps must always be locked when the child is•

in the seat.

The harness straps must be tightened without slack and not•

twisted.

The seat cover contains magnets in the areas with the•

orange indications. Magnets can inﬂuence electronic

equipment like pacemakers.

The ﬂoor support must always be used. Make sure that the•

ﬂoor support is fully pushed down.

When installed with ISOﬁx: Make sure the indicators are•

green before you drive.

When the child weighs over 18 kg or the shoulder height•

grows above the highest position of the shoulder straps, the

child must change to a group 2/3 seat.

After an accident, the seat must be replaced. Although it•

may look undamaged, if you were to have another accident,

the seat may not be able to protect your child as well as it

should.

It is important that you read this user manual BEFORE installing

your seat. Incorrect installation could endanger your child.

Belt hook (2x)

Preparing to install

Crucial parts

Release handle head rest

Belt clamp (2x)

Adjustable head rest

Harness shoulder straps

Harness buckle

Belt tension indicator (if

applicable)

Central adjuster

Belt tensioner

ISOﬁx release button (2x)

(red/green indicator)

ISOﬁx safety button (2x)

Height adjuster

ﬂoor support (2x)

ISOﬁx sliding release handle

Floor support

ISOﬁx car anchorage (2x)

ISOﬁx connectors (2x)

Reclining knob

ISOﬁx insertion clips (2x)

Forward-facing ISOﬁx installation

Pull the sliding release handle

fully upwards and pull the seat

forward (3).

Find the ISOﬁx anchorage

points in the vehicle (1).

If your vehicle is not equipped

with ISOﬁx insertion clips insert

these to make installation easier.

You can ﬁnd the ISOﬁx insertion

clips under the base of the seat

or delivered separately with the

seat (2).

It is NOT ALLOWED to mount the seat in a front

passenger seat WITH AN ACTIVATED AIRBAG.

When mounting in the back seat, push the front seat forward as

much as possible.

When mounting in the front seat, adjust the back rest in an

upright position.

(1)

(2)

(3)

Click the ISOﬁx connectors in the

ISOﬁx car anchorages. Make sure

both indicators are GREEN (4).

Push the ﬂoor support fully down.

Make sure the ﬂoor support is in

contact with the ﬂoor (5).

Push the seat ﬁrmly into the

vehicle seat. The seat is now

ready to use (6).

(4)

(5)

(6)

Removing the seat

If the seat is installed in the back seat of the vehicle, push the

front seat of the vehicle forward as much as possible

To release the ISOﬁx connectors

simultaneously push the ISOﬁx

safety button and pull the ISOﬁx

release button. Do this for both

sides. The ISOﬁx connectors are

released when the indicators

show RED (7).

Pull the ﬂoor support upwards,

by releasing the height adjusters

at both sides (8).

Remove the insertion clips from

the car (9).

(7)

(8)

(9)

Put the shoulder belt through the

belt clamps. Make sure the belt is

not twisted (13).

Push the belt tensioner in the

arrow direction to tension the

3-point car belt (14).

Make sure the 3-point car belt is as tight as possible.

Repeat the procedure if the car belt is not tight.

(13)

(14)

Forward-facing belt installation

It is NOT ALLOWED to mount the seat in a front

passenger seat WITH AN ACTIVATED AIRBAG.

When mounting in the back seat of the vehicle, push the front

seat of the vehicle forward as much as possible.

When mounting in the front seat of the vehicle, adjust the back

rest in an upright position.

Release the release handle at the

back of the head rest and push the

head rest down while keeping the

head rest upright (11).

Put the child seat on the seat of the

vehicle. Unlock the belt clamps (10).

Pull the hip belt around the bottom

base of the seat and click the car belt

in the buckle (12).

(10)

(12)

(11)

Push the seat ﬁrmly into the car

seat.

Tight installation is most important

for forward facing seats.

Tension the belts as follows:

Pull the shoulder belt upwards (A).

Have a ﬁrm grip on the shoulder

belt in the seat area (B). Close the

clamp on the inner side (C).

Pull upper belt part on the door

side and close clamp D (13).

Push the head rest in the correct

position (refer to ‘Positioning of the

child’ on page 11). Push the ﬂoor

support fully down. Make sure the

ﬂoor support is in contact with the

ﬂoor of the car. The seat is now

ready to use (15).

10-

(15)

(17)

The height of the shoulder

straps and the head rest can be

adjusted by releasing the release

handle at the back of the head

rest and pulling the head rest up

or down while keeping the head

rest upright (17).

Positioning of the child

Position of the shoulder straps:

Check that the shoulder strap

slots are levelled with your child’s

shoulders (16).

too high

too low

correct

Pull the shoulder straps up while

pressing the button of the central

adjuster (18).

Open the harness buckle.

(16)

(18)

Removing the seat

If the seat is installed in the back seat of the vehicle, push

the front seat of the vehicle forward as much as possible.

Loosen the tension in the car belt by releasing the belt

tensioner.

Unlock the belt clamps and unlock the car belt.

Remove the car belt and remove the seat from the vehicle.

Position the shoulder straps

over the orange marking at

sides of the seat to keep the

harness open while you position

the child (19).

When the child is positioned,

place the shoulder straps over

the child’s shoulders and close

the buckle: CLICK! (20).

Pull the harness strap through

the central adjuster in the

direction of the green arrow

straight up-/forwards. Continue

pulling until the harness is a

comfortable but ﬁrm ﬁt. The

belt tension indicator will show

green (21).

Make sure that the harness straps are ﬁxed in the right way,•

after ﬁtting the cover.

Sleeping position

The seat has 4 reclining positions.•

By turning the reclining knob, the•

seat can be put in another position

(22).

!Make sure that the harness straps are always locked and

tightened when the child is in the seat.

Removing and reﬁtting the cover

(19)

(20)

(21)

(22)

Removing the cover

Pay attention when you remove the cover, as ﬁtting the

cover is done in the opposite way.

The cover of the head rest can be taken off separately by

disconnecting the hooks at the backside and pulling off the

fabric to the front.

To remove the seat cover, the harness straps must be

released at both sides. See red circle (23).

Start to take off the lower seat part and unhook both harness

straps from the metal belt hooks.

(23)

wash with similar colours

It is NOT ALLOWED to mount the seat in a front•

passenger seat WITH AN ACTIVATED AIRBAG.

Install only with 3-point car belts, approved to•

UN/ECE Regulation No. 16 or other equivalent

standards (26).

Warning: potential misuse

shoulder

belt hip belt

(26)

Cleaning instructions

The cover of the seat must be washed according to the•

instructions on the inside of the cover (25).

DO NOT use any aggressive cleaning products; these may•

harm the construction material of the seat.

(25)

Reﬁt the cover

Pull the harness straps through the opening of the seat cover

and lock the harness buckle. Pull the crotch strap through the

opening of the seat part.

Pull the loops of the harness straps from the bottom of the

seat part through the openings to the hooks in the bottom of

the seat. Hook both harness straps on the metal belt hooks

and pull the straps ﬁrmly to ensure that they are correctly

installed (24).

Mount the top part and then the shoulder parts. Mount the

seat part and bring the seat cover under the rear parts of the

sidewalls.

Pull the head rest in the highest position. Mount the head rest

cover and connect the hooks at the back side. Pull the harness

straps through the holes. Connect the loose bottom part of the

head rest fabric with the plastic part under the head rest.

(24)

DO NOT use the seat with folded

ﬂoor support (28).

DO NOT use the seat without

ﬂoor support when mounted

forward facing.

DO NOT drive with RED ISOﬁx

indicators (29).

DO NOT attempt to dismantle, modify or add any part to the•

seat. Warranty will expire if non-original parts or accessories

are used.

DO NOT use anything, such as a cushion, to raise the child•

seat off the passenger seat of the vehicle. In an accident the

seat will not be able to protect your child in the right way.

Never leave your child unattended in the seat.•

Make sure all passengers are informed about how to release•

your child in case of emergency.

An unoccupied child seat should always be fastened in the•

vehicle.

Make sure luggage or other objects are properly secured.•

Unsecured luggage may cause severe injuries to children and

adults in case of accidents.

Never use the seat without the cover. The cover is a safety•

feature and may only be replaced by an original BeSafe cover.

Under the fabric cover we use EPS foam. Do not push or pull•

too hard against the foam, since you might damage the foam.

Do not use any aggressive cleaning products; these may•

harm the construction material of the seat.

BeSafe advises that child seats should not be bought or sold•

second-hand.

KEEP this user manual for later use with the seat.•

DO NOT use the seat for longer than 5 years. Due to ageing,•

the quality of the material may change.

DO NOT use at home. It has not been designed for home use•

and can only be used in a vehicle.

When installed with ISOﬁx: Check the manufacturer’s vehicle•

handbook.

Important advice

DO NOT leave any space between the back of the seat and the

seat of the vehicle (27).

(27)

(28)

(29)

Practical advice

When the child seat is mounted in the car check all the areas

where the child seat might touch the interior. We recommend

using a (BeSafe) protection cover in these places to avoid cuts,

marks or discolouration on the interior of the vehicle, especially

in vehicles with leather or wooden interior.

Guarantee

All BeSafe products are carefully designed, manufactured•

and tested. All of our BeSafe child seats are tested

periodically out of our continuous production in our test

laboratory. Furthermore they are tested by independent test

institutes.

Should this product prove faulty within 24 months of•

purchase due to materials or manufacturing fault, except

covers and harness straps, please return it to the original

place of purchase.

The guarantee is only valid when you use your seat•

appropriately and with care. Please contact your dealer, he

will decide if the seat will be returned to the manufacturer

for repair. Replacement or return cannot be claimed. The

guarantee does not get extended through repair.

The guarantee expires: when there is no receipt, when•

defects are caused by wrong and improper use, when

defects are caused by abuse, misuse or negligence.

Point of sale information

Notice for FORWARD FACING installation

Next car seat

This is a semi-universal ISOﬁx Child Restraint System. It is•

approved to regulation No. 44.04 series of amendments for

general use in vehicles ﬁtted with ISOﬁx anchorage systems.

It will ﬁt vehicles with positions approved as ISOﬁx positions•

(as detailed in the vehicle handbook), depending on category

of the child seat and of the ﬁxture.

The mass group and the ISOﬁx size class for which this•

device is intended is: A.

The seat is suitable for ﬁxing into the seat positions of the•

vehicles listed in the separate ‘car list’. Seat positions in

other vehicles may also be suitable to accept this child

restraint. If in doubt, consult either the child restraint

manufacturer or the retailer. For updated car list see:

www.besafe.eu.

When installed with a 3-point car belt: Only suitable if the•

approved vehicles are ﬁtted with 3-point car belts, approved

to UN/ECE Regulation No. 16 or other equivalent standards.

The BeSafe iZi Up is a group 2/3 seat which can be used for•

children from 15 till 36 kg, which covers the age group from

4 till 12 years.

Andere Handbücher für IZI COMFORT ISOFIX

Inhaltsverzeichnis

Andere BESAFE Autositz Handbücher

BESAFE

BESAFE iZi Combi Bedienungsanleitung

BESAFE

BESAFE IZI COMFORT ISOFIX Bedienungsanleitung

BESAFE

BESAFE iZi Kid Bedienungsanleitung

BESAFE

BESAFE iZi Go Isofix Bedienungsanleitung

BESAFE

BESAFE iZi flex flx i-Size Bedienungsanleitung

BESAFE

BESAFE izi modular isofix base Bedienungsanleitung

BESAFE

BESAFE iZi Comfort Bedienungsanleitung

BESAFE

BESAFE iZi Turn B i-Size Bedienungsanleitung

BESAFE

BESAFE IZI COMFORT ISOFIX Bedienungsanleitung

BESAFE

BESAFE iZi Go Modular i-Size Bedienungsanleitung

BESAFE

BESAFE iZi Up FIX Bedienungsanleitung

BESAFE

BESAFE iZi Up X1 Handicap Bedienungsanleitung

BESAFE

BESAFE PAD+ Bedienungsanleitung

BESAFE

BESAFE IZI SLEEP - V8.0 Bedienungsanleitung

BESAFE

BESAFE iZi Combi x2 Bedienungsanleitung

BESAFE

BESAFE Handicap Bedienungsanleitung

BESAFE

BESAFE IZI UP Bedienungsanleitung

BESAFE

BESAFE iZi Comfort Bedienungsanleitung

BESAFE

BESAFE iZi Modular Base Bedienungsanleitung

BESAFE

BESAFE 1-2-3 Bedienungsanleitung

BESAFE

BESAFE iZi Modular i-Size Bedienungsanleitung

BESAFE

BESAFE iZi Plus Bedienungsanleitung

BESAFE

BESAFE iZi Combi Bedienungsanleitung

BESAFE

BESAFE IZI UP Bedienungsanleitung

Beliebte Autositz Handbücher anderer Marken

Britax

Britax PARKWAY SGL Bedienungsanleitung

JANE

JANE nurse cruiser Bedienungsanleitung

Digicom

Digicom Tippy Pad Bedienungsanleitung

Giordani

Giordani orion 012 Bedienungsanleitung

BRIO

BRIO ZENTO Bedienungsanleitung

Combi

Combi Zeus Turn 8815 Series Bedienungsanleitung

Graco

Graco Car Booster Seat Bedienungsanleitung

Coccolle

Coccolle Atira Bedienungsanleitung

hifold

hifold HF01-GL Bedienungsanleitung

CYBEX

CYBEX SOLUTION X2-FIX Bedienungsanleitung

kiwy

kiwy SLF 123 Bedienungsanleitung

Safety 1st

Safety 1st Summit ISO 30 Bedienungsanleitung

Safety 1st

Safety 1st Grand 2-IN-1 Bedienungsanleitung

Graco

Graco NAUTILUS Bedienungsanleitung

Britax

Britax Multi-Tech BB0-702-00 Bedienungsanleitung

Grammer

Grammer MSG45/421 Betriebsanleitung

Nuna

Nuna REBL PLUS Bedienungsanleitung

Graco

Graco Child Restraint Bedienungsanleitung