BETCO Crewman E83013-00 Bedienungsanleitung

Crewman



17 Heavy Duty Floor Machine

Operators Manual

Parts Schematic

Item #E83013-00

Operating Instructions - Betco Crewman



17HD, Crewman



20HD

Floor Machines

Specifications

xCleaning Path/Pad Size: 17”, 20”

xMotor: 1.5 hp, 120v, 12 A, 60 HZ

xPad Speed: 175 RPM

xPower Cord: 50’ 14/3 Safety Yellow

xHandle Grips: Anti-Fatigue

xOperating Wheels: 5” Non-marking

xProductivity: Bonnet-1100 sq.ft/hr., buff/scrub-2400 sq.ft/hr., strip-800

sq.ft/hr.

xWeight: 90 lbs.

xDimensions: Length 24.25”, Width 20”, Height 48”

! WARNING! IMPORTANT SAFETY INSTRUCTIONS

Carefully read and understand this manual before operating this machine.

To reduce risk of fire, electric shock, or injury:

xDo not operate in explosive areas, near flammable liquids or gases.

xOnly plug into a properly grounded outlet.

xDo not exposure to rain, store indoors.

xDo not plug in or handle machine with wet hands.

xDo not operate the machine with a damaged cord or plug.

xDo not block or disconnect safety lever.

xDo not leave machine plugged in while unattended.

xUnplug machine before servicing.

xDo not put fingers under the pad or pad holder.

xUnplug the machine before installing or removing the pad.

xUse only high speed burnishing pads.

xDo not put any foreign object into openings. Do not use with any opening

blocked; keep free of dust, lint, hair, & anything that may reduce airflow.

xKeep hair, loose clothing, fingers, & all parts of body away from openings

& moving parts.

xTurn off all controls before unplugging.

xDo not use in or around flammable or combustible liquids such as gasoline

or use in areas where they may be present.

xConnect to a properly grounded outlet only. See grounding instructions.

Operating Instructions - Betco Crewman



17HD, Crewman



20HD

Floor Machines

Grounding Instructions

This machine must be grounded. If it should electrically malfunction, grounding

provides a path of least resistance for electric current to reduce the risk of electric

shock. This machine is equipped with a cord having an equipment-grounding

conductor & grounding plug. The plug must be plugged into an appropriate outlet

that is properly installed & grounded in accordance with all local codes &

ordinances.

! DANGER!

Improper connection of the equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or service person if you are in

doubt as to whether the outlet is properly grounded. Do not modify the plug

provided with the machine. If plug will not fit the outlet, have a proper outlet

installed by a qualified electrician.

Replace the plug if the grounding pin is damaged or broken.

Extension cords connected to this machine should be 12 gauge, 3-wire cords

with 3-prong plugs & outlets. DO NOT use extension cords more than 50 feet

long.

Warranty Policy

10 Year

Subject to conditions stated below. Betco warrants the rotationally molded

polyethylene tanks/housings and injection molded vacuum head assemblies to

be free from defects in materials and workmanship for a period of ten years to

the original purchaser.

3 Year

Betco offers a three-year warranty to the original purchaser on other Betco

components to be free from defects in material and workmanship. *See list of

exempted wear items.

*Note: Wear items exempt from warranty include power cords, transport wheels,

belts, pad drivers, clutch plates, handle grips, filters, screens, gaskets, throttle

cables and brushes.

Operating Instructions - Betco Crewman



17HD, Crewman



20HD

Floor Machines

Operating Instructions

Check machine for damage to cord or plug.

Use suitable pads or brushes.

To install or change the pad:

1. Unplug the machine.

2. Tip the machine back on the wheels.

3. Install pad driver or brush.

4. Center the pad on the pad driver.

To operate the machine:

1. Plug into a grounded outlet.

2. Release the handle and lower it.

3. The handle can be locked into a comfortable position for the operator or used

free floating.

4. Press the safety lever and squeeze the trigger to start the machine.

5. Do not operate in one place as damage to the floor or finish could result.

6. Do not operate the machine with the handle in the upright position.

7. Remove the pad after every use.

8. Store the machine tilted back on the transport wheels.

9. Use only new or clean pads and reverse them as needed.

Maintenance Instructions

To maintain appearance – wipe the machine with a damp cloth after use.

Warning – Unplug the machine before servicing

This machine is equipped with an hour meter to signal maintenance intervals of

250 hours. It will begin flashing at 245 hrs and stop at 255 hrs to signal the

operator to check the following:

1. Check the motor brushes for wear or excessive arcing.

2. Check the cord and electrical system.

3. Check the safety lockout on the trigger.

4. Check wheels.

View Betco SKU LOC. Description Qty

Fig. 1

83125 310122 Switch Box, handle 1

83325 310121 Cover, Switch Box 1

85032 210102 Switch 1

310124 Handle Tube 7/8x16” 1

83127 310118 Grips 2

83128 310169 Trigger, Switch 1

83129 310119 Safety Lock 1

83130 110149 Spring 1

83270 110163 Clip, Spring 1

85037 210121 Cord, 50’ – 14-3 ST 1

83132 210105 Cord, Handle 14-3 1

210106 Grommet 3/8 ID 1

310125 Handle, Weldment 1

110178 Screw ¼ - 20 x ¾ Hex 2

110115 Nut, ¼ - 20 Nylok 2

110140 Screw ¼ - 20 x 1 ¾ 4

210109 Wire, ground 1

210110 Wire Nut 2

110146 Wire Tie 1

110116 Screw # 6 2

110159 Decal, Safety 1

Fig. 2

110130 Washer, Fender ¼” 2

110150 Screw, ¼-20x1” 2

83141 310111 Bumper 1

110119 Washer, Flat 5/16 USS 4

110120 Washer, lock 5/16 4

110177 Bolt, 5/16-18 x1.5” Hex 4

Fig. 3

310137 Base, F M 20” 1

310138 Base, F M 17” 1

83191 210111 Motor, 1.5 HP, AC 1

210113 Motor, 1 HP, AC 1

210112 Motor, 1.5 HP, 2 speed 1

83144 310114 Wheel 5" 2

310132 Axel, 1/2" x 12.375 1

310115 Axel, 1/2" x 13.875" 1

83143 110144 Caps, Axel 1/2" 4

Fig. 1

Fig. 2

Fig. 3

Fig. 4

View Betco

SKU

LOC.

View Betco

SKU

LOC. Description Qty

Fig. 4

83133 310129 Handle Cam Lock 1

83134 110111 Bolt, Adj 5/16-18 Cam 1

83135 110112 Washer, Oval 1

85073 110148 Nut, 5/16-18 Nylock 2

83137 310128 Cord Hook 1

83136 310130 Bracket, Handle 1

83143 110114 Pin 1/4 x 3/4 1

83267 110164 Washer, Spring 1/4" 1

83268 110151 Cap, Push 1/4" 1

87415 110169 Washer, Spring 3/8" 1

83269 110168 Washer, Spring 1/2" 7

83145 110103 Washer, Nylon 7

Fig. 5

Vac Formed Cover, Motor, Black 1

110141 Screw 1/4-20 x 1" 4

110142 Washer 1/4 Flat 4

110143 Washer 1/4 Lock 4

110180 Decal, 20HD 1

110181 Decal, 20DS 1

110186 Decal, 17HD 1

110187 Decal, 20DS 1

Manual, 17 & 20 FL M 1

110174 Box, Packaging 20” 1

110175 Box, Packaging 17” 1

110135 Box, Insert Handle 20” 1

110176 Box, Insert Handle 17” 1

Inhaltsverzeichnis

Andere BETCO Bodenreinigungsmaschine Handbücher

BETCO

BETCO Foreman 1600 Bedienungsanleitung

BETCO

BETCO OPTIMA XR Series Produkthandbuch

BETCO

BETCO CREWMAN AS20B Bedienungsanleitung

BETCO

BETCO GeneSys 15 Produkthandbuch

BETCO

BETCO Stealth ASD20BT Produkthandbuch

BETCO

BETCO FOREMAN 20 HD Bedienungsanleitung

BETCO

BETCO FOREMAN 20DS Bedienungsanleitung

BETCO

BETCO BPS28 Bedienungsanleitung

BETCO

BETCO FOREMAN 17DS Produkthandbuch

BETCO

BETCO XT3 Bedienungsanleitung

BETCO

BETCO E12327-00 BIG BERTHA XSM30 Produkthandbuch

BETCO

BETCO Stealth ASD26BT Produkthandbuch

BETCO

BETCO BR1500 Bedienungsanleitung

BETCO

BETCO GENIE APS Bedienungsanleitung

BETCO

BETCO STEALTH ASD20B Produkthandbuch

BETCO

BETCO Fiber PRO 8 BFP8 10080210 Bedienungsanleitung

BETCO

BETCO Crewman DC200 Bedienungsanleitung

BETCO

BETCO E12314-00 Produkthandbuch

BETCO

BETCO B20TR Bedienungsanleitung

BETCO

BETCO Optima QT E12317-00 Bedienungsanleitung

BETCO

BETCO e83039-00 Genie B 14" Produkthandbuch

BETCO

BETCO STEALTH ASD20B Produkthandbuch

BETCO

BETCO ex13100 Bedienungsanleitung

BETCO

BETCO Pourman 25 Bedienungsanleitung

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Tennant

Tennant 8210D Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Tennant

Tennant 215 Produkthandbuch

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch