BFT Cell Switch Prime Bedienungsanleitung

Installation & User Manual For

Cell Switch Prime

GSM Cellular Gate opener and GSM alarm signalling device.

BFT Americas

P a g e | 2

Contents

Overview of system

…………….Pg 3

Site Survey

…………….Pg 3

SIM card

…………….Pg 3

Power

…………….Pg 3

Inserting the SIM card

…………….Pg 4

Connections on the GSM Controller

…………….Pg 4

Output Connections example

…………….Pg 5

Notification Feature

…………….Pg 5

Powering Up

…………….Pg 5

Programming

…………….Pg 6

Programming as an Access Control Device

…………….Pg 6

Internal Clock Function

…………….Pg 7

Winter / Summer Daylight Saving

…………….Pg 7

Set Automatic Triggering Times

…………….Pg 7

Delete all Automatic Triggering Times

…………….Pg 8

Notification Number

…………….Pg 8

Programming as an Alarm Dialling Device

…………….Pg 8

Complete List of Parameters

…………….Pg 8

Controlling Relays when used as Alarm

…………….Pg 10

Control by SMS

…………….Pg 10

Check Door / Gate Status

…………….Pg 10

Setting up the free App

…………….Pg 10

Using the Android App

…………….Pg 12

Using the Iphone App

…………….Pg 15

Troubleshooting

…………….Pg 18

Change History

…………….Pg 19

P a g e | 3

Overview of System

Please read this entire manual before attempting to install this system.

This system should only be installed by a professional automatic gate installer or access control

specialist dealer.

It is recommended that the system be set up, configured, commissioned and tested on a

workshop bench before taken to site for installation.

Site Survey

Before installing this system, you need to be sure that there is good mobile GSM cell coverage in

the area it is to be installed. It is recommended that you conduct a site survey, and check

reception on the site for a GSM network. If reception is poor in the area, then this system is not

recommended. *INSECT INGRESS WILL INVALIDATE WARRANTY*

SIM Card

You will need a SIM card in order to use this system. It should be a regular voice and SMS text

SIM card. Do not use a data only SIM, as this is only for tablets and will not work in the unit.

Power

TIP: Most technical calls received are due to installers using CAT5 or alarm cable to power

the unit. Neither are rated to carry enough power (2 amp peak). Please use following

cable…

Up to 2 metres (6 feet) –Use minimum 0.5mm2(18 gauge)

Up to 4 metres (12 feet) –Use minimum 0.75mm2(16 gauge)

Up to 8 metres (24 feet) –Use minimum 1.0mm2(14 gauge)

Using insufficient power cable thickness will cause excessive stress on electronic components,

and therefore void the manufacturer’s warranty.

1) Ensure the SIM has calling credit, and can make and

receive calls on a mobile cell phone.

2) Check that the SIM is not locked to a phone and can be

used in other devices.

3) Check that the SIM does not have a PIN code request.

4) Disable voicemail service on the SIM.

4) You are now ready to begin programming.

P a g e | 4

To avoid such problems it is recommended (and is good practice) to locate the power supply as

close to the device as possible. This avoids power cable noise and interference and enhances the

lifetime of the product.

Inserting the SIM card

Note: This unit is a dual 3G/4G system, operating on either 3G or 4G network frequencies.

Connections on the GSM Controller

Please ensure the SIM card is a 3G/4G compatible Nano SIM card.

The SIM may also be 2G capable as well, as long as both the SIM

and the network also support 3G/4G. Do not use a SIM card for a

tablet, as these only support data, and do not support voice and

SMS. You simply require a mobile phone type SIM card.

SIM

GSM Board

POWER OFF

45° chamfer IN.

Copper pads DOWN.

Press until “Click”.

N/C

COM

N/O

N/C

COM

N/O

12v dc

N/C

COM

N/O

GSM

modem

N/C

COM

N/O

Out 1

Out 2

24v

ac/dc

Antenna connection

12v dc output (not

used)

Pre-wired to push button

Optional exit button,

triggers output 1 for

programmed time.

24v DC

Optional gate

position limit switch

Relay

outputs

Signal LED

CPU

Power

Micro SIM

Insert this

way!

24v

ac/dc

Power

CPU

Signal LED

24v DC

Optional gate

position limit switch

12v dc output

(not used)

Pre-wired to push

button

Optional exit button, triggers output 1 for programmed time

Relay outputs.

Antenna

Connection

Relay 1

Relay 2

SIM

P a g e | 5

Output Connections Example

This example shows relay 1 connected to a gate motor controller for vehicle gates, and output 2

connected to a magnetic lock for a door or pedestrian gate.

Powering Up

Perform a final check of wiring and ensure the antenna is connected before switching on the

power. Once the power is switched on, the power LED should illuminate.

TIPS: My GSM LED is still searching…

-Check the SIM card is registered and can make a

call in a phone.

-Check the SIM card is seated correctly. Power off,

clean the contacts on the SIM and the GSM unit,

and reinsert the SIM.

-Check power cable distance and thickness.

-Increase antenna height.

-Change network.

-Move antenna away from metal objects.

-Fit a high gain antenna.

Output 1

Output 2

Use 24v

dc PSU

COM

N/O

COM

N/C

Relay 1

Relay 2

(not supplied)12v dc

Other device

e.g. exit switch

Magnetic lock

Gate controller

COM

Start

Electric Gates

=1 bar

= 2 bars

= 3 bars

= 4 bars

= Processing

= Standby

= Connected

= Searching

P a g e | 6

Installing the Programmer APP for the first time

If you are using an Apple or Android smart phone, download and install the BFT Cellbox

Programmer app. It will make programming much easier. (You can search store, or scan QR

code below)

Note: You may notice the app “BFT Cellbox Prime” on the store. This is for the home owner.

Installers should install the BFT Cellbox Programmer app.

Accept and allow all

permissions (Android

version shown)

To register first time,

enter your name, email

and cell phone number.

After you send the

registration email, go

back to the app screen.

P a g e | 7

Programming a Brand-New Install

Press SETTINGS to reveal the screen shown. This screen will

store details for the client.

Now you are ready to begin programming!

Enter name or site name for customer.

Enter INTERCOM SIM phone number.

Default Engineer’s and user`s pass codes. These

can be changed later.

P a g e | 8

Programming

Now that you have either entered a new client, or selected an existing client from the client list,

you are now ready to begin programming.

Programming an EXISTING Install

1.Go to MORE>CLIENT LIST to reveal the screen shown.

2.Press and HOLD to select the desired client.

3.Iphone users press the info symbol. Android users press and

hold the client, and then press upload to begin programming.

Now you are ready to begin programming!

P a g e | 9

Note: SMS string= *20#

Step 1: Check Reception

Go to MORE>INFO & press the reception check button.

On Android the app will automatically send a SMS string (*20#)

to the intercom.

On iphone, users will be taken to their SMS screen to

confirm before sending the string. The intercom should then

reply with a signal level between 1 and 31.

1-12

Poor 13-20

Medium 21-31

Good

For good performance, signal level on 2G should be at least 13.

On 3G products it should be no less than 10.

TIP: If signal is lower than recommended, then take IMMEDIATE

action. Change network if possible, or use an optional high gain

antenna. Check power cable is within recommended

specification. (Poor power cable can lower reception).

SMS message sent to intercom.

SMS reply to your phone.

P a g e | 10

Programming Additional Features

Programming as an Alarm Dialler

Device.

1.Press the SINGLE home icon for a 1 button system, or MULTI

for a 10 button system.

2. Simply enter cell phone numbers and/or landline phones

which the intercom is to call when the call button is pressed. (10

button model please enter button number).

3. Press SAVE. Note: iphone users will be taken to their SMS

screen to confirm the SMS string (press send).

4. The intercom should reply with an SMS to your phone

showing the SMS string and an OK status.

SMS Programming Format:

9999#111telephonenumber#

Pass code

Function code

(add number)

Data

Button number

(1-10)

Telephone number

position 1-4

E.g. 9999#111firstnumber#112secondnumber#113thirdnumber#

Programming as a Gate Opener (100

phone numbers)

1.Press the CALLER ID button.

2. Simply enter cell phone numbers of visitors whom should

have access with caller ID (up to 8 at a time).

3. Press SAVE. Note: iphone users will be taken to their SMS

screen to confirm the SMS string (press send).

4. The intercom should reply with an SMS to your phone

showing the SMS string and an OK status.

To delete, enter number above and press delete

SMS Programming Method:

Add numbers -

9999#72telephonenumber#72telephonenumber#

Delete specific number –

9999#73telephonenumber#

Delete all –

9999#73*#

Inhaltsverzeichnis

Andere BFT Toröffner Handbücher

BFT

BFT VIRGO Bedienungsanleitung

BFT

BFT GIUNO ULTRA BT A Series Bedienungsanleitung

BFT

BFT AKTA A30 Bedienungsanleitung

BFT

BFT LUX BT Bedienungsanleitung

BFT

BFT E5 Bedienungsanleitung

BFT

BFT ICARO SMART AC A2000 Bedienungsanleitung

BFT

BFT PHEBE Bedienungsanleitung

BFT

BFT ELI250N Bedienungsanleitung

BFT

BFT LUX BT 2B Bedienungsanleitung

BFT

BFT joint Bedienungsanleitung

BFT

BFT MICHELANGELO Bedienungsanleitung

BFT

BFT VIRGO SMART BT A Bedienungsanleitung

BFT

BFT FCS Bedienungsanleitung

BFT

BFT DEIMOS BT A400 120 Bedienungsanleitung

BFT

BFT P7 Bedienungsanleitung

BFT

BFT Ultra KUSTOS ULTRA BT A25 Bedienungsanleitung

BFT

BFT IGEA Bedienungsanleitung

BFT

BFT Cell Box Switch Bedienungsanleitung

BFT

BFT KUSTOS ULTRA BT A25 Bedienungsanleitung

BFT

BFT PHOBOS NL BT Bedienungsanleitung

BFT

BFT GIUNO ULTRA BT A20 Bedienungsanleitung

BFT

BFT KIT CAPIENZA D113708 Bedienungsanleitung

BFT

BFT PHOBOS N Bedienungsanleitung

BFT

BFT MICHELANGELO Bedienungsanleitung

Beliebte Toröffner Handbücher anderer Marken

Elite

Elite CSW200UL Bedienungsanleitung

CAME

CAME FROG-PM4 Bedienungsanleitung

SOMFY

SOMFY FX230 Bedienungsanleitung

Aprimatic

Aprimatic ONDA 500 Bedienungsanleitung

Turnstiles

Turnstiles FSW 900 Bedienungsanleitung

Erreka

Erreka BUL BL33 Betriebsanleitung

Erreka

Erreka VULCAN S Bedienungsanleitung

Beninca

Beninca R1-2 WBV Bedienungsanleitung

Erreka

Erreka VULCAN D Bedienungsanleitung

Motorline professional

Motorline professional FORT Bedienungsanleitung

Beninca

Beninca BOB5024 Bedienungsanleitung

AGA

AGA GATEMASTER 900 HD Bedienungsanleitung

Chamberlain

Chamberlain MotorLift HC280ML Bedienungsanleitung

SOMFY

SOMFY Dexxo RTS Pro Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung

Westfalia

Westfalia 85 27 06 Bedienungsanleitung

CAME

CAME F500 Bedienungsanleitung

Extel

Extel VERA Bedienungsanleitung