Big Banana BB700 Bedienungsanleitung
www.bigbananatools.com
BB700 instruction manual
2
www.bigbananatools.com
Table of Contents
Safety Precautions
Vehicle Inspection
Tool Description
Controls
Getting Started
Main Menu Settings
Language
Contrast
Display Test
Keypad Test
Units of Measurement
Where’s the Vehicle’s OBD?
Connecting the BB700
Operation Instructions
Diagnostics
Reading Trouble Codes
Erasing Trouble Codes
View Live Data
View Freeze Frame Data
I/M Status
Vehicle Information
Oxygen Sensor Test
Mode 6 Test
EVAP Systems Test
Update / Warranty & Servicing
Appendix a
Appendix b
Appendix c
2
3
4
5
6
7
7
8
9
9
9
10
10
11
12
11
14
16
17
18
19
20
21
24
25
26
27
29
30
contents
3www.bigbananatools.com
For your safety, read this user manual before using the scan tool. Read your
vehicle’s service manual and follow all safety precautions.
SAFETY FIRST!
Do not connect, or disconnect, the scan tool
to your vehicle while the ignition is on.
Make sure the parking brake is engaged. For an automatic transmission, make sure
the transmission is in park. For manual transmissions, make sure the transmission
is in neutral and the parking brake is set.
The ignition must be in the OFF position prior to connecting/ disconnecting the
scan tool. Failure to do so could damage the scan tool and the vehicle’s electronic
components.
When the engine is turned on, operate the vehicle in a well-ventilated area.
Wear protective gear such as ANSI safety glasses, proper clothing, and gloves.
Be aware of fast moving parts such as belts, fans, and other moving components.
Always remain at a safe distance while the engine is running.
Do not touch hot engine parts. Serious burns can happen if proper protective gear
(safety gloves, safety glasses) are not worn.
Never smoke or have open ames around a vehicle that is being tested. Fuel and
battery fumes are extremely ammable and can cause an explosion.
Never leave tools on a vehicle’s battery.
When working around airbag components or wiring, follow the vehicles’ safety
manual for instructions. Unintended deployment of an airbag can cause serious
injuries and even death. Be aware that an airbag can still deploy several minutes
after the ignition is turned o.
To preserve the electronics of your handheld scanner, only connect one device at
a time to your vehicle’s Data Link Connector (DLC) port. Using another device, with
more than a 10 megohm impedance, can damage your scan tool and vehicle.
4
www.bigbananatools.com
This scan tool is designed to read your vehicle’s emissions-related
faults and retrieve fault codes related to a malfunction with these
systems.
Simple mechanical problems can cause poor engine performance and
trigger fault codes. Look for low oil levels, damaged hoses, broken or
loose wiring & electrical connectors, dirty air lters and spark plugs. All
known mechanical problems should be resolved before an accurate
test is administered. Refer to your vehicle’s service manual or consult a
certied service technician for additional information.
Check the following before performing any tests:
Check the engine coolant, power steering, transmission and other
critical uids for accurate levels.
Inspect the air lters and lter housings, check for holes, rips and
cracks or other objects that may block airow.
Inspect the engine belts for proper operation.
Inspect all the engine sensors are connected correctly.
Inspect all spark plugs.
Check for damaged, loose, disconnected or lost electrical wiring.
Ensure all electrical harnesses are connected properly and no wiring is
exposed.
Inspect the battery terminals and ensure they are clean.
Ensure that the battery and the charging voltages are at a proper level.
If necessary, perform a compression, vacuum, or timing test.
vehicle inspection
5www.bigbananatools.com
tool description
Functionality:
• Compatible with all 1996 and newer cars, light trucks and SUV’s.
• Communicates with all OBD II protocols: VPW, PWM, ISO, KWP 2000, and CAN
• Temporarily resets and clears the check engine light (CEL).
• Displays diagnostic trouble codes (DTC).
• Retrieves, displays and clears Generic and Manufacturer Specic Codes,
Multiple Codes and Pending Codes.
• Reads and displays Live Data.
• Reads and displays Freeze Frame Data.
• Tests I/M Readiness (Inspection/Maintenance).
• Update software via the internet.
• English and Spanish settings available. Coming soon, additional language
settings.
• Reads and displays VIN number, CVN and Cal ID.
• Performs a Mode 6 Test.
• Performs an EVAP Systems Test.
• Built in USB Port.
• Ability to alternate between metric and standard units of measure.
Dimensions and Specications:
Display: Backlit LCD,160x160 pixel display.
Operating Temperature: 0 to 50 Celsius (-32 to 122 Fahrenheit)
External Power: 10.0 to 15.5 volts provided via vehicle battery
Dimensions: 225mm Length 98mm Width 36mm Height
OBDII connector , 1500mm(59.99”)
Soft Carrying case included
6
www.bigbananatools.com
B
B
7
0
0
|
C
A
N
O
B
D
I
I
ENTER
ESCAPE
Vehicle Diagnostic Port:
OBDII -16PIN
LCD screen:
160 x 160 pixel display
Enter Key:
Conrms a selection of a menu
list and operates it
Escape Key:
Returns to the previous screen
Directional Arrows:
Up / Down
Moves the cursor up or down
Left / Right arrow:
Turns the pages
A
B
B
C
C
D
D
E
E
A
controls
7www.bigbananatools.com
getting started
Set up menu functionality
The set up menu allows the user to change the following
settings:
Language
Display Contrast
LCD Display Test
Keypad Testing
Unit of Measurement
Important Note:
Menu functionality should be completed
and set before diagnosing vehicle trouble
codes.
8
www.bigbananatools.com
getting started
Language
1. Press the Escape key to return to the Main Menu.
2. Press the Up/Down arrow key and select Language.
3. With the Language option selected, press the Enter key.
4. Press the Up/Down arrow keys to move through the
selections.
The screen will display dierent
language options.
Screen Contrast Settings
To adjust the contrast:
1. Press the Escape key to return to the Main Menu.
2. Press the Up/Down arrow keys and select Contrast.
3. Once the Contrast option is selected, press the Enter key.
4. Press the Up/Down arrow keys to select desired Contrast.
5. Press the Enter key.
9www.bigbananatools.com
getting started
Keypad Test
1. Press the Escape key to return to the Main Menu
2. Move the Up/Down arrow keys and select Keypad Test.
3. Once the Keypad Test option is selected, press the Enter key.
4. After the Enter key has been pressed, press any key. The
screen will ash and correspond to the key pressed.
5. An OK status should display on the screen.
6. To return to the Main Menu, press the Escape key twice.
Display Test:
This test refreshes the screen and tests all the pixels. It ensures
the scanner’s LCD screen is working properly.
1. Press the Escape key to return to the Main Menu.
2. Move the Up/Down arrow key and select Display Test.
3. Once the Display Test option is selected, press the Enter key.
Important Note:
The screen will ash horizontally and
vertically
10
www.bigbananatools.com
getting started
Unit of Measurement
1. Press the Escape button to return to the Main Menu.
2. Move the Up/Down arrow keys and select Units.
3. Once the units option is selected, press the Enter key.
Where is my vehicle’s OBD connector?
All cars manufactured for sale in the US since 1996 were
mandated, by Federal Law, to have an OBDII diagnostic port.
The connector must be located within three feet of the driver
and must not require any tools to be revealed. Please view
the following image of an OBD II connector. This connector is
normally located under the dashboard and above the gas or
brake pedal. Simply look under the dashboard or run your hand
along the bottom edge of the dashboard until you“feel“ the
connector. In some instances, the port is located behind the
ashtray.
For more information, please visit:
http://www.obdclearinghouse.com/oemdb
Inhaltsverzeichnis
