Billion BiPAC 7402R2 Bedienungsanleitung
BiPAC 7402R2
ADSL2+ VPN Firewall Router
Quick Start Guide
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router
For more detailed instructions on configuring and using
the ADSL2+ VPN Firewall Router, please refer to the on-
line manual.
Package Contents
BiPAC 7402R2 ADSL2+ VPN Firewall Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
Console (PS2-RS232) Cable
AC-DC power adapter (12VDC, 1A)
This Quick Start Guide
A
ttention
Place this router on a stable surface.
Only use the power adapter that comes with the package.
Using a different voltage rating power adaptor may damage
this router.
Warning
Do not use this router in high humidity or high
temperatures.
Do not use the same power source for this router as othe
r
equipment.
Do not open or repair the case yourself. If this router is too
hot, turn off the power immediately and have it repaired at a
qualified service center.
Avoid using this product and all accessories outdoors.
1
Quick Start Guide
The Front LEDs
LED Meaning
PPP / MAIL
Lit steady when there is a PPPoA / PPPoE connection.
Lit and flashed periodically when there is email in the Inbox.
ADSL When lit, it indicates that the ADSL (Line) port is connected to the DSLAM
and working properly.
LAN Port
1X — 4X
(RJ-45 connector)
Lit when the LAN link is connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
SYS Lit when the system is ready.
PWR Lit when power is ON.
2
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router
The Rear Ports
3
1
43
5 2
6
Port Meaning
1 Power Switch Power ON/OFF switch
2 PWR Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
4 LAN
1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
5 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).
6 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
Quick Start Guide
Connecting Your ADSL Router
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
4
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
5
Quick Start Guide
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status window
click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
6
Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and click
OK to finish the configuration.
7
Quick Start Guide
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol and click Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
8
Andere Handbücher für BiPAC 7402R2
2
Inhaltsverzeichnis
Andere Billion Netzwerk-Router Handbücher
Billion
Billion BIPAC-74x GE Series Bedienungsanleitung
Billion
Billion BiPAC 7401VP/VGP Bedienungsanleitung
Billion
Billion BIPAC 5102 Series Bedienungsanleitung
Billion
Billion BiPAC 7202 Bedienungsanleitung
Billion
Billion BiPAC 7800GZ Bedienungsanleitung
Billion
Billion BiPAC 7404VGP Bedienungsanleitung
Billion
Billion BiPAC 7404V series Bedienungsanleitung
Billion
Billion BiPAC 8200N Bedienungsanleitung
Billion
Billion BiPAC 9800 Bedienungsanleitung
Billion
Billion 400G Gebrauchsanweisung
Billion
Billion BIPAC 6600 Bedienungsanleitung
Billion
Billion BiPAC 7401V(G)P R4 Bedienungsanleitung
Billion
Billion myGuard 7202 Bedienungsanleitung
Billion
Billion BiPAC 7800(N) Bedienungsanleitung
Billion
Billion BiPAC 7560G Bedienungsanleitung
Billion
Billion BiPAC 5200S RC Series Bedienungsanleitung
Billion
Billion BiPAC 7404V series Bedienungsanleitung
Billion
Billion BiPAC 7402VGO Bedienungsanleitung
Billion
Billion BILLION BIPAC-7500GL Bedienungsanleitung
Billion
Billion BiPAC 5100 Bedienungsanleitung
