BIO RAD PharosFX 170-9450 Montageanleitung

Hardware Instruction Manual

for Catalog Numbers

170-9450 PharosFX System (532 nm)

170-9460 PharosFX Plus System (532 nm)

170-7890 External Laser (488 nm)

170-7892 External Laser (488 and 635 nm)

For Technical Service, Call Your Local Bio-Rad Office or, in the US, Call 1-800-4BIORAD (1-800-424-6723)

This instrument is for Laboratory Use Only

PharosFX™

Molecular Imager®System

Welcome

Dear Customer,

On behalf of Bio-Rad Laboratories, we would like to thank you for investing in the Molecular

Imager PharosFX Product Family. This combination of systems allows you the highest level

of flexibility for the best in isotopic and fluorescence imaging and we are sure that it will

provide you with many years of high quality imaging.

One of the best ways to familiarize yourself with the capabilities of your new PharosFX

system is to read this manual. In it, you will learn how to set up the system and operate all

hardware components. It is also recommended that you read the accompanying software

manual, to familiarize yourself with general acquisition functions and data analysis. After

reading this manual, please keep it close to your PharosFX system so that it can be

conveniently referred to.

Your PharosFX system is protected by a comprehensive instrument warranty agreement.

Please read this warranty (Appendix 3) thoroughly, so that you fully understand the coverage

it provides and are aware of your rights and responsibilities. One of the responsibilities of

system ownership is regular maintenance. Following the maintenance instructions provided

with this manual will help to keep your system and peripherals functioning optimally and will

protect your investment. Please also keep in mind that Bio-Rad offers a range of

comprehensive service agreements that can be tailored to meet your specific needs.

Bio-Rad Laboratories is dedicated to your total satisfaction and would be pleased to

answer any questions or concerns that you may have.

How to Contact Bio-Rad Laboratories

In the United States you can reach Bio-Rad Laboratories at the following numbers:

For general information

Toll free: 1-800- 4BIORAD

1-800-424-6723

Fax: 1-510-741-5802

email: [email protected]

For service or technical assistance

Toll free: 1-800-424-6723

Fax: 1-800-741-5802

Outside the United States contact your local Bio-Rad Laboratories office.

For information concerning Bio-Rad Laboratories and its products, visit our Worldwide Web

site at http://www.bio-rad.com.

Table of Contents

Section 1 General Information......................................................................1

1.1 About this Manual......................................................................................1

1.2 Safety Information......................................................................................1

1.2.1 General Cautions...........................................................................1

1.2.2 General Warnings..........................................................................2

1.2.3 Power Safety Information...............................................................2

1.2.4 Laser Safety Information ................................................................3

1.2.5 Screen Eraser Safety Information...................................................4

Section 2 Introduction...................................................................................4

2.1 System Capabilities ...................................................................................4

2.2 System Description....................................................................................4

2.3 Theory of Operation...................................................................................8

2.3.1 Fluorescence Detection Mechanism...............................................8

2.3.2 Storage Phosphor Detection Mechanism .......................................9

2.3.3 Data Processing and Analysis........................................................9

2.4 Overview of the Imaging Process.............................................................10

2.4.1 Steps in Fluorescence Imaging ....................................................10

2.4.2 Steps in Storage Phosphor Imaging.............................................10

Section 3 System Installation......................................................................11

3.1 Operating Requirements..........................................................................11

3.1.1 System Location...........................................................................11

3.1.2 AC Power Requirements..............................................................12

3.1.3 Host Computer Recommendations...............................................13

3.2 System Setup..........................................................................................13

3.2.1 Shipping Check............................................................................13

3.2.2 Unpacking....................................................................................13

3.2.3 Electrical and Communication Connections..................................15

3.2.4 Software Installation.....................................................................16

Section 4 System Operation ......................................................................16

4.1 Starting the Scanner................................................................................16

4.2 Fluorescence Operating Procedures........................................................17

4.2.1 Sample Preparation .....................................................................17

4.2.2 Inserting a Fluorescent Sample into the Scanner .........................18

4.2.3 Scanning Fluorescent Samples....................................................19

4.2.4 Inserting Emission Filters .............................................................20

4.3 Fluorescence Imaging Using the External Laser Module..........................22

4.3.1 External Laser Safety Information ................................................23

4.3.2 Fiber Optic Cable Alignment.........................................................23

4.4 Phosphor Imaging Operating Procedures................................................24

4.4.1 How to Prepare K-Type Imaging Screens ....................................24

4.4.2 How to Erase Imaging Screens....................................................24

4.4.3 How to Prepare Samples .............................................................25

4.4.4 How to Use the Exposure Cassette..............................................27

4.4.5 How to Scan the Imaging Screen.................................................28

Section 5 Care and Maintenance................................................................30

5.1 Scanner Maintenance..............................................................................30

5.2 Care for PharosFX Plus Accessories.......................................................30

5.2.1 General Care of Imaging Screens................................................30

5.2.2 Radioactive Contamination Check................................................30

5.2.3 Cleaning Imaging Screens ...........................................................30

5.2.4 Storage of Imaging Screens.........................................................31

5.3 Exposure Cassette and Platform Maintenance ........................................31

5.4 Screen Eraser Maintenance.....................................................................31

5.4.1 Changing Bulbs............................................................................31

Section 6 Troubleshooting ..........................................................................33

6.1 Factors Affecting Image Quality...............................................................33

6.2 Problem Solving Guide............................................................................34

Appendix 1System Specifications ................................................................35

Appendix 2Warranty Information..................................................................36

Appendix 3Ordering Information...................................................................37

Section 1

General Information

1.1 About this Manual

This manual provides instructions for installing, operating and maintaining the PharosFX

system. This manual uses certain conventions to facilitate understanding of the text material

and to assist operators in using the PharosFX system.

Notes, Cautions and Warnings

Notes, cautions and warnings are used to highlight certain operating procedures and

recommendations.

A note indicates a special procedure, an exception to normal operation or something else

of specific interest to the reader. Notes are preceded by the word “Note” in italics.

A caution precedes an operational step that could damage the instrument or destroy data

unless the operator takes certain precautions. Cautions are located in the main text, are

preceded by a Caution: statement and are accompanied by a “Caution Symbol” in the left

margin.

A warning precedes an operating procedure that could cause injury to the operator if not

followed correctly. Warnings are located in the main text, are preceded by a Warning:

statement and are accompanied by a "Warning Symbol" in the left margin.

1.2 Safety Information

Your safety and the safety of others is very important to us. To help you make informed

decisions about safety, we have provided comprehensive operating procedures and safety

information in this manual and on labels affixed to instrumentation. This information will

alert you to any potential hazards.

1.2.1 General Cautions

Caution: Always install the scan head locking screw before moving the PharosFX and

avoid subjecting the PharosFX system to vibration. (See section 3.2.2)

Caution: After transport, always remove the scan head locking screw before supplying

power to the PharosFX scanner. (See section 3.2.2)

Caution: Other than emission filter wheel access port, do not remove instrument covers.

There are no user-serviceable parts inside. Refer all servicing to qualified Bio-Rad personnel

or their agents. If you experience technical difficulties with the instrument, contact Bio-Rad

to schedule a service appointment.

Caution: The instrument should not be modified or altered in any way other than moving

or changing emission filters. Alteration of this instrument voids the manufacturer's warranty

and may create a potential safety hazard for the user.

Caution: Bio-Rad is not responsible for any injury or damage caused by the use of this

instrument for purposes other than that for which it is intended or by the modification of this

instrument when not performed by qualified Bio-Rad personnel or an authorized agent.

1.2.2 General Warnings

Warning: There are hazardous voltages inside the PharosFX scanner. Do not attempt to

defeat the door interlock or remove the instrument's cover. These are designed to prevent

user injury.

1.2.3 Power Safety Information

The PharosFX system is designed and certified to meet both I.E.C. 61010 safety standards

and Center for Devices, Radiological Health (CDRH) laser safety standards. Certified

products are safe to use when operated in accordance with the instruction manual. This

safety certification does not extend to uncertified equipment or accessories, even when

connected to the PharosFX system.

This instrument and its accessories should not be altered or modified in any way. Alteration

of the PharosFX or its accessories will void the manufacturer's warranty, void the I.E.C.

61010 and CDRH certification, and create a potential safety hazard for the user.

Bio-Rad Laboratories is not responsible for any injury or damage caused by the use of this

instrument for purposes other than for which it is intended or by modifications of the

instrument not performed by Bio-Rad or an authorized agent.

Figure 1.1 shows two serial number certification labels. These are found at the rear of the

PharosFX system and the rear of the External Laser. This label provides manufacturing

data about the instrument, its voltage settings and CDRH compliance information.

Fig. 1.1.a. Instrument serial number information on the rear of the PharosFX Scanner.

Note: For easy customer access, serial number information for the PharosFX scanner is

also located on the right hand side of the overlay located behind the scanner door.

Fig. 1.1.b. Instrument serial number information on the rear of the External Laser.

1.2.4 Laser Safety Information

This instrument and its accessories are certified according to 21 CFR 1040 of the CDRH,

as a Class I laser device and IEC / EN 60825-1+A1+A2 as a class 1 laser device.

(Figure 1.1.a).

The laser contained within the PharosFX and PharossFX Plus scanning unit is configured

with a laser that generates energy up to 15 milliwatts at 532 nm. The cover of each scanner

has redundant interlocks and is designed to protect the user.

The optional External Laser Module contains an Argon-Ion laser that produces laser energy

of up to 10 milliwatts at 488 nm. This External Laser Module can also be outfitted with an

additional laser diode that produces laser energy of up to 10 milliwatts at 635 nm. The

cover of this system is designed to protect the user at all times.

Warning: Do not remove the cover for any reason or defeat the interlock. Attempting to

operate the unit with the cover removed may damage the instrument and expose the

operator to energy from the laser.

Warning: Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous laser energy exposure.

Caution: The top cover should be removed by trained service personnel only. Do not

attempt to operate the product with the cover removed. The PharosFX system should be

serviced only by Bio-Rad or its trained representatives.

Laser warning labels (Figure 1.2) are located externally on the top cover and rear of the

instrument and internally on the top surface of the mounting plate, at the rear right-hand

corner and the top of the laser module.

Fig. 1.2. Laser warning label.

1.2.5 Screen Eraser Safety Information

Warning: The Screen Eraser must be plugged into a grounded electrical outlet.

Section 2

Introduction

2.1 PharosFX System Capabilities

The PharosFX Product Family provides options for imaging and analyzing the following

sample types:

Fluorescence (for PharosFX, and PharosFX-Plus Models)

The PharosFX detects almost any visibly excited fluorescent dye. The internal and optional

external lasers allow optimal excitation of single-color or multi-color fluorescent samples.

Computer controlled filter wheels with 6 available emission filter positions allow detection of

many multi-color fluorescent signals. The system is also capable of performing sequential

detection of multiple fluorescent dyes on the same gel or blot.

Colorimetric Detection

A Transilluminating Screen, made of white plastic, is provided with the sample tray for

PharosFX and PharosFX Plus for documentation of gels stained with colorimetric stains,

such as Coomassie and Silver Stain.

Radioisotope Emissions (for PharosFX Plus Only)

Detects a broad range of isotopes, including 32P, 33P, 35S, 14C, and 3H. The PharosFX uses

storage phosphor screen technology that is at least ten times more sensitive to isotopic

emission than x-ray film. The system is compatible with most available phosphor imaging

screens based on the BaFBr:Eu storage phosphor chemistries

2.2 System Description

Fig. 2.1. A Typical PharosFX scanner and peripherals.

The PharosFX (Plus) imaging system consists of:

• Laser scanner

• Sample Tray set, including: glass sample tray, transilluminating screen, and sample

holders

• Pre-installed filters for fluorescence detection: 640BP, 605BP, blank filter holder for

custom filters. PharosFX Plus has an additional 390BP filter for phosphor screens

• External Laser Module is optional

(1) Laser Scanner

The PharosFX and PharosFX Plus have an internal laser that emits light at 532 nm only. All

PharosFX units can scan at resolutions of 50, 100, 200, and 800 microns and have a linear

dynamic range that extends over 4.8 orders of magnitude (1:65536). In contrast, x-ray film

has a linear dynamic range that is limited to only 1.5 orders. The scanner also contains fully

automated emission filter wheels with 6 filters. These combined features permit the

PharosFX to image almost any fluorescent dye and to scan multi-color fluorescence

applications, in addition to storage phosphor imaging with the PharosFX Plus.

(2) Sample Tray

The glass Sample Tray is used as a scanning platform for fluorescent gels or blots and

K-type phosphor screens. Its spill resistant design exhibits very low background fluorescence

and high chemical resistance.

Additional Multi-Sample trays can be purchased to accommodate thick agarose gels, gels

within glass plates (1707819 Multi-Sample Tray II), metal backed storage phosphor

screens,and microtiter plates (1707812 Multi-Sample Tray).

Fig. 2.2. a) Multi-Sample Tray, b) Multi-Sample Tray II

(3) Optional External Laser Module

The optional external laser module provides one or more additional excitation source(s).

The current configurations for lasers are:

a) 488 nm Only

b) 488 nm and 635 nm

Fig. 2.3. External Laser Module

(4) Storage Phosphor Imaging Screens

Bio-Rad offers a range of storage phosphor screens to match different user requirements.

Table 2.1 summarizes the key features of each screen. The screens are composed of a

barium fluorobromide matrix doped with europium (BaFBr:Eu); they can be used with

traditional autoradiography cassettes without a darkroom, are easy to handle and are used

solely for the detection of isotopic emissions.

PharosFX Plus offers a variety of phosphor storage applications in addition to all the

functionality of the PharosFX. All phosphor screens are reusable and unharmed by repeated

exposure to radioactivity. Screens are sensitive to βparticles and X-rays. All screens are

flexible and easy to handle. Exposure takes place in standard X-ray cassettes. All phosphor

screens require erasure prior to re-exposure, and their lifetime is extended when they are

cared for properly.

Imaging Screen-K

This is a general-purpose screen designed for all common radioisotopic emitters, such as

32P, 33P, 35S, and 14C. These screens are available in 35 x 43 cm and 20 x 25 cm formats.

Screens are guaranteed for 1 year.

Imaging Screen-K/Tritium

This is a special imaging screen available for imaging 3H. These screens require special

care and handling and are reusable only if cared for properly. Screens are 20 x 25 cm and

are covered by a 6-month warranty.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BIO RAD Scanner Handbücher

BIO RAD

BIO RAD gs-800 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung