Black Box EMERALD SE Bedienungsanleitung

STEP X - Name of Step

24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM

EMS2000SE, EMS2000SE-T, EMS2000SE-R

EMERALD

QUICK START GUIDE

STEP 1A - Transmitter Diagrams

2 3 4 5 6 7 8 9 10

STEP 1B - Transmitter Components

TABLE 1. EMS2000SE-T COMPONENTS

NUMBER IN DIAGRAM AT LEFT DESCRIPTION DESCRIPTION

1 Power LED button Deactivated, not used

2 5 VDC Power In connector Connect to supplied power adapter

3 USB Type B connector Connect to PC/workstation USB

connector

4 Speed LED Indicates 10/100/1000 Mbps

5 RJ-45 port Connect to network

6Activity LED Indicates activity on the link

7DVI Video connector Connect to PC Video

8 RJ-45 port Connect to serial console

9Audio Line In Connect to speakers

10 Audio Line Out Connect to speakers

NOTE: Unit automatically powers on when plugged in; must be powered off at the power source.

STEP 2A - Receiver Diagrams

2, 3 4 5

6 7 8 9 10 11 12

STEP 2B - Receiver Components

TABLE 2. EMS2000SE-R COMPONENTS

NUMBER IN DIAGRAM AT LEFT DESCRIPTION DESCRIPTION

1On/Off button Deactivated, not used

2, 3 (2) USB Type A connectors Connect to USB peripherals

4Microphone Connect to microphone

5Speakers Connect to speakers

6 5 VDC Power In connector Connect to supplied power adapter

7 (2) USB Type A connectors Connect to USB peripherals

8 Speed LED Indicates 10/100/1000 Mbps

9 RJ-45 port Connect to network

10 Activity LED Indicates activity on the link

11 DVI Video connector Connect to monitor

12 DB9 connector Connect to serial console

NOTE: Unit automatically powers on when plugged in; must be powered off at the power source.

STEP 3 - Connect Power

CONNECT POWER TO TRANSMITTER

1. Locate the power supply adapter and the AC

line cord.

2. Plug the DC connector of the power supply

into the matching socket on the rear of the

transmitter.

3. Attach the AC line cord to the power supply

adapter.

CONNECT POWER TO RECEIVER

1. Locate the power supply adapter and the AC

line cord.

2. Plug the DC connector of the power supply

into the matching socket on the rear of the

receiver.

3. Attach the AC line cord to the power supply

adapter.

CONNECT THE TRANSMITTER

1. Attach the Emerald SE Transmitter to the

target PC/workstation using DVI and USB Type

B cables.

2. Connect to the LAN using standard CAT5

UTP cables between the RJ-45 connector

and the local network connection.

NOTE: The Emerald SE works best with

a 1 Gigabit connection.

CONNECT THE RECEIVER

1. Attach the monitor, keyboard, mouse, USB

and audio devices to the Emerald SE Receiver.

2. Connect to the LAN using standard CAT5

UTP cables between the RJ-45 connector

and the local network connection.

NOTE: The Emerald SE works best with

a 1 Gigabit connection.

STEP 4 - Connect the Peripherals

STEP 5 - Starting Up and Default Settings

STARTING UP

1. Once everything is connected, press the

Power button on the front of the Emerald SE

Receiver.

2. The Graphical User Interface (GUI) will

appear on the screen.

3. Enter the default administrator user name

and password.

User name: admin

Password: blank (just press the Enter key)

4. The default network setting for the Emerald

SE Receiver uses a preconfigured static IP

address.

5. If you require the unit to be set to use DHCP,

select the Control tab on the GUI and then

choose the Network option. Select the DHCP

option and click Apply.

DEFAULT SETTINGS

Default Settings:

Transmitter IP Address: 192.168.1.22

Receiver IP Address: 192.168.1.21

Type: Static

Subnet Mask: 255.255.255.0

Default Gateway: 0.0.0.0

Admin username: admin

Admin password: no password, it is blank by

default

Ports Used: 3389

IMPORTANT: Do not lose the admin password

once configured; there is no way to reset or

retrieve it. The Emerald SE receiver has the

option to create a second administrator account

as a secondary entrance.

STEP 6 - Point-to-Point Installation

POINT-TO-POINT INSTALLATION

In a point-to-point configuration, no

administrator setup of the Emerald SE

Transmitter or the Emerald SE receiver is

required. This enables you to install the

system quickly, directly out of the box. In the

point-to-point configuration, you can install

only one transmitter and receiver pair on a

subnet and both must be on the same subnet

unless a router is present in the network

to span subnets. To span across different

subnets, you will need to have admin rights to

both routers on either side of the installation

and setup port forwarding for port “3389”

for Remote Desktop.

If further configuration is required to change

the default IP addresses, you can access

the transmitter’s network settings through

the remote unit:

1. Simply connect the transmitter to the receiver

using a CATx cable (but do not power up the

transmitter yet), then connect a keyboard,

monitor, and mouse to the remote unit (remote

unit is on at this time).

2. Login as “admin” and go to (Control)>>

(Transmitter)>> (Discover) and follow the

on-screen steps.

3. It will advise you to connect both devices

together and then power up the transmitter

and press the “Next” button.

4. It will take several minutes to discover

the transmitter, but once found, you can modify

the network parameters.

STEP 7 - Matrix Installation and Getting Started

MATRIX INSTALLATION

In a matrix installation, every Emerald SE

transmitter and receiver requires its own IP

address. By default, the DHCP setting is set

to static, so the addresses will need to be

configured manually:

1. Always configure the transmitter first by

connecting the transmitter to the receiver

using a CATx cable (but do not power up the

transmitter yet), then connect a keyboard,

monitor, and mouse to the remote unit (remote

unit is on at this time).

2. Login as “admin” on the remote unit and

go to (Control)>> (Transmitter)>> (Discover)

and follow the on-screen steps.

3. It will advise you to connect both devices

together, and then power up the transmitter

and press the “Next” button.

4. It will take several minutes to discover the

transmitter, but once found, you can modify

the network parameters.

5. Once the transmitter is configured, you can

now configure the receiver.

6. If the units are on different subnets,

then routers will need to be used to properly

direct traffic.

GETTING STARTED

Once the IP addresses have been configured,

each receiver will need to be configured for

users, user passwords, user access rights

and default video resolutions. You can access

these settings from the receiver’s OSD (reboot

the receiver and login as admin) and begin

configuring these parameters.

NOTE: Each receiver can support a maximum

of 32 users and a maximum of 32 targets

(virtualized or transmitter).

STEP X - Name of Step

EMS2000SE_QSG_REV1.PDF

Contact our free, 24/7 technical support in the US at 877-877-2269

or INFO@BLACKBOX.COM

For other countries, go to BLACKBOX.COM/CONTACT-US

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Matrix-Umschalter Handbücher

Black Box

Black Box AVS-HDMI2-4X4 Bedienungsanleitung

Black Box

Black Box AC180A Bedienungsanleitung

Black Box

Black Box AC1051A Bedienungsanleitung

Black Box

Black Box SC122A Bedienungsanleitung

Black Box

Black Box IS290A Bedienungsanleitung

Black Box

Black Box 26645 Bedienungsanleitung

Black Box

Black Box Emerald EMD4000T Bedienungsanleitung

Black Box

Black Box XPT-DVI4X4 Bedienungsanleitung

Black Box

Black Box VSW-HDMI4X4-B Bedienungsanleitung

Black Box

Black Box IS290A Bedienungsanleitung

Black Box

Black Box VSW-HDMI2X2-4K Bedienungsanleitung

Black Box

Black Box ServSwitch DKM FX Bedienungsanleitung

Black Box

Black Box AVSW-VGA8X8-B Bedienungsanleitung

Black Box

Black Box SW540A-R3 Bedienungsanleitung

Black Box

Black Box SW441A-R2 Bedienungsanleitung

Black Box

Black Box Boxilla Bedienungsanleitung

Black Box

Black Box VSDDVI Series Bedienungsanleitung

Black Box

Black Box ACXC8 Bedienungsanleitung

Black Box

Black Box AVS1600 Bedienungsanleitung

Black Box

Black Box VSW-DVI8x8 Bedienungsanleitung

Black Box

Black Box DCX1000 Bedienungsanleitung

Black Box

Black Box AC1120A Bedienungsanleitung

Black Box

Black Box AVS-1600-R2 Bedienungsanleitung

Black Box

Black Box AVS-HDMI2-8X8-R2 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte