Black Box LPS500A-MM-LC-R2 Bedienungsanleitung

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

10/100/1000B-T

TO 1000B-X POE

PSE GBE MEDIA

CONVERTER

USER MANUAL

LPS500A-MM-LC-R2, LPS500A-MM-SC-R2, LPS500A-SM-10K-LC-R2

LNK/ACT

PWR

15.4

SPD

PoE

PSE-TP

10/100/1000BASE-T PoE PSE To 1000BASE-X

Media Converter

PoE-Power Sourcing Equipment

TX RX

KINSUN

TABLE OF CONTENTS

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CONTENTS

SAFETY INFORMATION.................................................................................................................................................................................. 3

1. SPECIFICATIONS ......................................................................................................................................................................................... 4

2. OVERVIEW..................................................................................................................................................................................................... 5

2.1 INTRODUCTION.......................................................................................................................................................................................... 5

2.2 AVAILABLE MODELS................................................................................................................................................................................. 5

2.3 FEATURES ................................................................................................................................................................................................... 5

2.4 WHAT’S INCLUDED.................................................................................................................................................................................... 5

2.5 HARDWARE DESCRIPTION ...................................................................................................................................................................... 6

2.5.1 FRONT PANEL ......................................................................................................................................................................................................6

2.5.2 BACK PANEL.........................................................................................................................................................................................................6

3. INSTALLING THE CONVERTER.................................................................................................................................................................. 7

4. WDM SINGLE FIBER MODEL ...................................................................................................................................................................... 9

5. LINK FAULT PASSTHROUGH ................................................................................................................................................................... 10

6. LED DESCRIPTION..................................................................................................................................................................................... 12

7. DIP SWITCH AND RESET BUTTON.......................................................................................................................................................... 13

8. CABLE CONNECTION PARAMETER........................................................................................................................................................ 14

A.1 ELECTRONIC EMISSION NOTICES ....................................................................................................................................................... 15

A.2 FCC CLASS A STATEMENT...................................................................................................................................................... 15

A.3 NOM STATEMENT..................................................................................................................................................................... 16

B.1 DISCLAIMER.............................................................................................................................................................................. 17

B.2 TRADEMARKS USED IN THIS MANUAL.................................................................................................................................. 17

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

SAFETY INFORMATION

CAUTION: Circuit devices are sensitive to static electricity, which can damage their delicate electronics. Dry weather conditions or

walking across a carpeted floor may cause you to acquire a static electrical charge.

To protect your device, always:

Touch the metal chassis of your computer to ground the static electrical charge before you pick up the circuit device.

Pick up the device by holding it on the left and right edges only.

41. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 1: SPECIFICATIONS

1. SPECIFICATIONS

TABLE 1-1. SPECIFICATIONS

SPECIFICATION DESCRIPTION

Compliance

Standards

IEEE802.3u 10/100BASE-TX, 100BASE-FX

IEEE802.3z/ab 1000BASE-T

IEEE802.3af Power over Ethernet

Certifications FCC Part 15 Class A;

CE Mark

Data Transfer Rate

Speed 1000 Mbps, 100 Mbps, 10 Mbps

Forwarding Rate 14,880 pps, 148,800 pps, 1,488,000 pps

Flow Control

Full duplex IEEE802.3x compliant for full duplex

Half-duplex Backpressure flow control for half-duplex

Cable

UTP CAT5 cable (up to 328 ft. [100 m])

Fiber 50/125, 62.5/125 or 100/140 μm multimode;

8.3/125, 8.7/125, 9/125 or 10/125 μm singlemode

Indicators

LEDs POWER, PoE, TP LNK/ACT, SPD, FX LNK/ACT, 4 W, 7 W, 15.4 W

Power

PSE Supports “Endpoint” via TP pin 1, 2, 3, 6

Power Requirement, AC Line 100 to 240 VAC, 47 to 63 Hz

Power Consumption Max. up to 65 W

Environmental

Operating Temperature 32 to 122° F (0 to 50° C)

Humidity 5% to 95%

Mechanical

Connectors

LPS500A-MM-LC-R2: (1) RJ-45 PoE, (1) pair of multimode LC;

LPS500A-MM-SC-R2: (1) RJ-45 PoE, (1) pair of multimode SC;

LPS500A-SM-10K-LC-R2: (1) RJ-45 PoE, (1) pair of singlemode LC

Dimensions 1.6” H x 6.2” W x 5.2” D (4.0 x 15.8 x 13.3 cm)

NOTE: For connecting this device to a router, bridge, or switch, refer to the corresponding device’s user manual.

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 2: OVERVIEW

2. OVERVIEW

2.1 INTRODUCTION

The unmanaged PoE PSE Media Converter is a next generation Ethernet media converter offering one gigabit per second performance.

It is used in Ethernet copper to fiber media conversion applications over long distances.

The media converter delivers one (10M/100M/1G) RJ-45 with one PoE port (supports 802.3af up to 15.4 W) and one GbE SC or LC port.

The converter provides high hardware performance and environment flexibility for Ethernet applications.

2.2 AVAILABLE MODELS

Three models are available:

LPS500A-MM-LC-R2: TP to Multimode Fiber Media Converter with RJ-45 and LC connectors

LPS500A-MM-SC-R2: TP to Multimode Fiber Media Converter with RJ-45 and SC connectors

LPS500A-SM-10K-LC-R2: TP to Singlemode Fiber Media Converter with RJ-45 and SC connectors

2.3 FEATURES

RJ-45 link supports IEEE 802.3ab 1000BASE-T Gbps Ethernet over twisted-pair cable

Fiber link supports IEEE 802.3z 1000BASE-X Gbps Ethernet over fiberoptic cable

Provides IEEE 802.4af maximum 15.4 W Power over Ethernet (PoE)

DIP switch sets PoE, LFP, and normal/cut-through configurations

Power over Ethernet (PoE): The PoE converter provides PoE power and supports various PoE PD device types (IP-phone, IP-camera,

WiFi-AP) for end users to eliminate an extra power cable to these devices

Link Fault Passthrough (LFP): When this is enabled, the UTP receiver is passed to the fiber transmitter to make the media converter

appear transparent to the end devices that are connected. It uses LFP to indicate when far-end fault issues occur. If a fault occurs, the end

devices indicate a failure for troubleshooting.

2.4 WHAT’S INCLUDED

Your package should contains the following items. If anything is missing or damaged, contact Black Box Technical Support

at 877-877-2269 or info@blackbox.com

10/100/1000BASE-T to 1000BASE-X PoE PSE GbE Media Converter

AC Power Cord

61. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 2: OVERVIEW

2.5 HARDWARE DESCRIPTION

Figures 2-1 and 2-2 show the front and back panel sof the converter. Table 2-1 describes the components.

2.5.1 FRONT PANEL

PSE 10/100/1000Base-TX to 1000Base-X Media Converter

PoE-Power Sourcing Equipment

802.3af Endpoint

4W LINK/ACT

15.4W POE

SPD FDX/COL

PWR

1310nm/1550nm

PSE-TP

12 3 4

FIGURE 2-1. POE PSE MEDIA CONVERTER FRONT PANEL

2.5.2 BACK PANEL

FIGURE 2-2. POE PSE MEDIA CONVERTER BACK PANEL

TABLE 2-1. CONVERTER COMPONENTS

NUMBER IN FIGURE 2-1 OR 2-2 SIGNAL DESCRIPTION

1 (1) RJ-45 PoE connector Links to Powered Device (PD)

2 (6) TP LEDs: PoE, TP LNK/ACT, SPD, 4 W, 7 W, 15.4 W Indicates twisted-pair port status

3 (2) FX LEDs: Power, FX LNK/ACT Indicates fiber port status

LPS500A-MM-LC-R2 : (1) multimode LC connector:

LPS500A-MM-SC-R2: (1) multimode SC connector;

LPS500A-SM-10K-LC-R2: (1) singlemode LC connector

Links to Gigabit fiber network

5(1) 3-prong power connector Links to 100 to 240 VAC, 47 to 63 Hz power

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 3: INSTALLING THE CONVERTER

3. INSTALLING THE CONVERTER

PSE TP-Fiber Converter with Powered Device (PD)

1. Connect the PSE media converter to an AC power source.

2. Install the UTP media cable to the IEEE 802.3af PD converter.

LNK/ACT

PWR

15.4

SPD

PoE

PSE-TP

10/100/1000BASE-T PoE PSE To 1000BASE-X

Media Converter

PoE-Power Sourcing Equipment

TX RX

KINSUN

To Gigabit fiber network

To PD device

CAT5

cable

Fiber

cable

FIGURE 3-1. MEDIA CONVERTER CONNECTIONS

NOTE: It can work as a pure converter that connects to the non-PoE converter.

3. Install the media cable for network connection.

WARNING:

Verify that the AC input conforms to your country AC power requirement and then insert the power plug.

Ensure that the power of PSE device is turned on

Install the media cable for network connection

TABLE 3-1. CONNECTOR FUNCTIONS

CONNECTOR FUNCTION

TP Port

10/100BASE-TX:

Auto-Negotiation

Auto-MDIX

flow control for Full-Duplex

backpressure for Half-Duplex

1000BASE-TX:

Auto-Negotiation mode

Auto-MDIX only for Auto-Negotiation

flow control for Full-Duplex only

Fiber Port 1000BASE-SX/LX (SC/LC) with flow control

NOTE: Link partner must be 1000FDX with flow control

81. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 3: INSTALLING THE CONVERTER

PoE PD or

PoE Splitter

1000BASE-X

Fiber Network

Converter/Switch PoE PSE TP-to-GbE

Fiber Converter

FIGURE 3-2. PSE TO PD OR POE SPLITTER

CAT-5 Cable

RJ-45 Connector

Signal Pairs 48V

8765 4 32 1

FIGURE 3-3. ENDPOINT PSE RJ-45 MALE CONNECTOR

NOTE: IEEE802.3af assigns pairs on the RJ-45 connector and Cat.5 cable of Endpoint PSE.

Endpoint : -48V via TP pin 1, 2, 3, 6

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 4: WDM SINGLE-FIBER MODEL

4. WDM SINGLE FIBER MODEL

The TP-Fiber converter is specially designed with an optic Wavelength Division Multiplexing (WDM) model that can transport a

bidirectional full duplex signal over a single fiber simultaneously.

TABLE 4-1. SINGLE-FIBER TX/RX WAVELENGTH

SINGLE-FIBER MODEL TX/RX WAVELENGTH

1310-nm singlemode 10 km TX (Transmit) 1310 nm

RX (Receive) 1550 nm

1550-nm singlemode 10 km TX (Transmit) 1550 nm

RX (Receive) 1310 nm

NOTE: The 1310 nm and 1550 nm models must be installed in pairs, i.e., install 1310 nm model at one end and 1550 nm model at the

other one.

PoE PSE TP-to-GbE Fiber

WDM Single Fiber

TX-1310/RX-1550

PoE PD

PoE PSE TP-to-GbE Fiber

WDM Single Fiber

TX-1550/RX-1310

Single Fiber

FIGURE 4-1. POWER FROM PSE TO PD

10 1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877. 2269

CHAPTER 5: LINK FAULT PASSTHROUGH

5. LINK FAULT PASSTHROUGH

The LFP (link fault passthrough) in a TX/FX converter application is controlled by the software and instantly takes effect. Link status on

one port is propagated to the other port to notice the remote nodes. If the TP port is unplugged, this converter stops transmission on the

fiber port. This causes the remote fiber node link to fail. An LED shows the link failure on both TP and fiber ports. If the fiber link fails, this

converter restarts auto-negotiation on the TP port but always stays in the link failure state. This causes the remote TP node link to fail.

An LED also shows the link failure on both TP and fiber ports. Refer to Figure 5-1 shown below for the normal status when the link

succeeds.

Also refer to Figure 5-2 and Figure 5-3 for the error status when TP Cable A, Fiber Cable B, or Fiber Cable C fails to connect.

NOTE: Link fault pass through (LFP) function only takes effect as S1-Bit2 (see Figure 5-4) is enabled. Disabled S1-Bit2 will turn this media

converter into a general one.

Fiber

Cable

GbE

Switch

GbE

Switch

LFP LFP

Remote

Station

D AB

TP TP

FIGURE 5-1. NORMAL STATUS VIA LFP CONVERTER

Fiber

Cable

GbE

Switch

GbE

Switch

LFP LFP

Remote

Station

D AB

TP TP

FIGURE 5-2. THE STATUS AS TP CABLE A OR D IS BROKEN

Fiber

Cable

GbE

Switch

GbE

Switch

LFP LFP

Remote

Station

D AB

TP TP

FIGURE 5-3. THE STATUS AS FIBER CABLE B OR C IS BROKEN

Fiber

Cable

GbE

Switch

GbE Fiber

Switch

LFP

Remote

Station

CTP

FIGURE 5-4. NORMAL STATUS VIA LFP CONVERTER

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Medienkonverter Handbücher

Black Box

Black Box LPS500A-MM-SC Bedienungsanleitung

Black Box

Black Box AC345A Bedienungsanleitung

Black Box

Black Box VS-2001-ENC Bedienungsanleitung

Black Box

Black Box LH1709A-SCTS-US Bedienungsanleitung

Black Box

Black Box LE1502A-R3 Bedienungsanleitung

Black Box

Black Box AC139A Bedienungsanleitung

Black Box

Black Box LH2001A-ST-R3 Bedienungsanleitung

Black Box

Black Box RGB/EGA/CGA/MDA to DVI(/VGA) Converter Bedienungsanleitung

Black Box

Black Box IC920A Bedienungsanleitung

Black Box

Black Box IC483A-R2 Bedienungsanleitung

Black Box

Black Box IC135A Bedienungsanleitung

Black Box

Black Box IC945A Bedienungsanleitung

Black Box

Black Box LHC201A Bedienungsanleitung

Black Box

Black Box VSC-HDMI-SDI Bedienungsanleitung

Black Box

Black Box LBH1500A Bedienungsanleitung

Black Box

Black Box PI045A Bedienungsanleitung

Black Box

Black Box AVSP-HDMI1X2 Bedienungsanleitung

Black Box

Black Box PI115A-C Bedienungsanleitung

Black Box

Black Box LPD500A Bedienungsanleitung

Black Box

Black Box H.264 Bedienungsanleitung

Black Box

Black Box LMC5207A Bedienungsanleitung

Black Box

Black Box LGC5211A Bedienungsanleitung

Black Box

Black Box LGC215A Bedienungsanleitung

Black Box

Black Box LMC200 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung