Blastrac BMG580 Bedienungsanleitung
Operating Manual
BMG580
Technical data
Safety instructions
General
Transport
Initial operation
Operation
Maintenance
Electrical systems
Fault diagnosis
Spare parts
Design and specifications are subject to
change without notice – March 2005
Blastrac BV
Utrechthaven 12
3433 PN Nieuwegein
THE NETHERLANDS
T +31(0)30 - 601 88 66
F +31(0)30 - 601 83 33
I www.blastrac.com
Nieuwegein
BMG580 Operating Manual
Technical Data
1
Contents Chapter 1
1.1 Rating
1.2 Unit specifications
1.3 Operative range and correct usage
1.4 Stand-by power supply
1.5 Machine type designation
Operation Manual BMG580
Technical Data
2
1.1 Rating
Unit / Designation: Blastrac Grinding machine
Machine type: BMG 580
Manufacturer:
Blastrac BV
Utrechthaven 12
3433 PN Nieuwegein
THE NETHERLANDS
T +31(0)30 - 601 88 66
F +31(0)30 - 601 83 33
I www.blastrac.com
1.2 Unit specifications
Technical data:
Grinding machine BMG-580
Power consumption 7,5 kW
Connected loads 220V three phase, 25.2A
Connected loads 400V or 440V three phase, 14.4A
BMG580 Operating Manual
Technical Data
3
Dimensions:
BMG-580
Length 950 mm
Width 580 mm
Height 1250 mm
Weight 280 kg
1.3 Operative range and correct usage
The grinding machine BMG-580 is exclusively
designed to process horizontal surfaces. The
machine must not be used for other purposes. The
manufacturer will not be liable for damage resulting
from incorrect usage. In these cases the user takes
responsibility for all risks.
1.4 Stand-by power supply (Generator)
If the grinding machine BMG-580 is to be operated
using power from a generator, the generator must be
operated in accordance with the current EN-VDE
directives (this applies to the protective earth
conductor in particular) in order to ensure that all
safety devices are functioning and to eliminate
possible damage to electrical components.
Operation Manual BMG580
Technical Data
4
1.5 Machine type designation
BMG580 Operating Manual
Safety Advice
1
Contents Chapter 2
2.1 Warnings and symbols
2.2 Organisational measures
2.3 Personnel selection and qualification
2.4 Safety precautions applicable to some operating sequences
2.5 Special work within the scope of use of the equipment and
maintenance activities as well as repairs during operation
2.6 Definition of the Safety off position
2.7 Particular dangerous aspects of the equipment
2.8 Electrical engineering regulations
Operating Manual BMG580
Safety Advice
2
2.1 Warnings and symbols
The following denominations and symbols are used in the Operating
Instructions to highlight areas of particular importance:
Symbol of operational safety.
In these Operating Instructions this symbol will be
shown next to all safety precautions that are to be
taken in order to ensure prevention to life and injury.
Follow these instructions and take special care in
these circumstances. In addition to these
instructions, the general safety precautions and
accident prevention guidelines are also to be
followed.
Particular details regarding the economical use of
the equipment.
Information, instructions and restrictions with regard
to possible risks to persons or to extensive material
damages.
Inhaltsverzeichnis
Andere Blastrac Schleifer Handbücher
Blastrac
Blastrac BG-250-230 Bedienungsanleitung
Blastrac
Blastrac BMG-735RS MKII Bedienungsanleitung
Blastrac
Blastrac BMG-720PRO Bedienungsanleitung
Blastrac
Blastrac BMG-435WD Bedienungsanleitung
Blastrac
Blastrac BMG-435WD Bedienungsanleitung
Blastrac
Blastrac BGS-250-115V-V2 Bedienungsanleitung
Blastrac
Blastrac BHG-1800 Bedienungsanleitung
Blastrac
Blastrac BMG-444 Bedienungsanleitung
Blastrac
Blastrac bg-250g11 Bedienungsanleitung
Blastrac
Blastrac BGS-250-115-S Bedienungsanleitung
