BLAUBERG BLABQUATRO Bedienungsanleitung

USER’S MANUAL

BLABQUATRO

AXIAL WALL / CEILING FAN

CONTENTS

Safety Instructions.............................................................................................................................................................................................................................. 4

Delivery set ............................................................................................................................................................................................................................................ 6

Brief description .................................................................................................................................................................................................................................. 6

Operation guidelines ....................................................................................................................................................................................................................... 6

Installation and set-up..................................................................................................................................................................................................................... 6

Technical maintenance................................................................................................................................................................................................................... 7

Storage and transportation regulations............................................................................................................................................................................... 7

Warranty................................................................................................................................................................................................................................................... 8

READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.

COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG

SERVICE LIFE OF THE UNIT.

KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT. YOU MAY NEED TO

REREAD THE INFORMATION ON THE PRODUCT SERVICING.

This user’s manual is a main operating document intended for technical, maintenance, and operating staﬀ.

The manual contains information about purpose, technical details, operating principle, design, and installation of the

BLABQUATRO unit and all its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems and should

be able to work in accordance with workplace safety rules as well as construction norms and standards applicable in the

territory of the country.

The information in this user’s manual is correct at the time of the document’s preparation.

The Company reserves the right to modify the technical characteristics, design, or conﬁguration of its products at any time

in order to incorporate the latest technological developments.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means in any

information search system or translated into any language in any form without the prior written permission of the Company.

FOLLOW THE USER’S MANUAL REQUIREMENTS TO ENSURE DURABLE AND

TROUBLE-FREE OPERATION OF THE UNIT.

SAFETY INSTRUCTIONS

Disconnect the unit from power supply prior to any connection, servicing, maintenance, and

repair operations.

Only qualied electricians with a work permit for electrical units up to 1000 V are allowed

for installation and maintenance. The present user’s manual should be carefully read

before beginning works.

• Single-phase power mains must comply with the acting local electrical norms and standards.

• Fixed electrical wiring must be equipped with an automatic circuit breaker.

• The unit must be connected to power mains through a QF automatic circuit breaker integrated

into the ﬁxed wiring system. The gap between the circuit breaker contacts on all poles must

be not less than 3 mm. Check the unit for any visible damages of the impeller and the casing

before starting installation. The casing internals must be free of any foreign objects that can

damage the impeller blades.

• While mounting the unit, avoid compression of the casing! Deformation of the casing may result

in the motor jam and noisy operation. Misuse of the unit and any unauthorised modiﬁcations

are not allowed.

• Take steps to prevent ingress of smoke, carbon monoxide, and other combustion products into

the room through open chimney ﬂues or other ﬁre-protection devices. Suﬃcient air supply

must be provided for proper combustion and exhaust of gases through the chimney of fuel

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED DOMESTIC WASTE.

burning equipment to prevent back drafting. Transported air must not contain any dust or other

solid impurities, sticky substances, or ﬁbrous materials.

• Do not use the unit in a hazardous or explosive environment containing spirits, gasoline,

insecticides, etc.

• Do not close or block the intake or extract vents in order to ensure the eﬃcient air ﬂow.

• Do not sit on the unit and do not put objects on it.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

Ensure that the fan is switched oﬀ from the supply mains before removing the guard.

The fan is to be installed so that the blades are more than 2,1 m above the ﬂoor;

Precautions must be taken to avoid the back-ﬂow of gases into the room from the open ﬂue of

gas or other fuel-burning appliances.

DELIVERY SET

Fan - 1 pc.

Screws with dowels - 4 pcs.

User’s manual - 1 pc.

Packing box - 1 pc.

BRIEF DESCRIPTION

The unit described herein is an axial fan for exhaust ventilation of small to medium-sized premises heated during winter. It

is designed for wall or ceiling mounting (Fig. 3-4). The fan is designed for connection to ø 100, 125 and 150 mm air ducts.

OPERATION GUIDELINES

The fan is rated for connection to single-phase AC 220-240 V/50 Hz power mains.

Air motion direction in the system must match the pointer on the fan casing.

Hazardous parts access and water ingress protection rating is IP22.

The fan is rated for operation at the ambient temperature ranging from +1 °C up to +45 °C.

The unit is rated as a Class II electrical appliance.

INSTALLATION AND SET-UP

The fan is designed for wall or ceiling mounting with direct air exhaust to the ventilation shaft or into the round air duct of

matching diameter (Fig. 2).

Fan installation sequence:

step 1. Cut oﬀ power supply and make sure electricity has been turned oﬀ (Fig. 5).

step 2. Run the power cable to the vent hole (Fig. 6).

step 3. Remove the front panel from the fan. Then remove the circuit board cover (Fig. 7).

step 4. Mark and drill holes for mounting the fan and then install the fan (Fig. 8-10).

step 5. Connect the fan to power mains according to the wiring diagram (Fig. 13).

step 6. Cover the casing with a front panel and a decorative panel (Fig. 11).

step 7. Supply power voltage to the fan (Fig. 12).

TERMINAL DESIGNATIONS ON WIRING DIAGRAMS

L— phase (220-240 V only) S— external switch

N— neutral (220-240 V only) QF — automatic circuit breaker

TECHNICAL MAINTENANCE

The fan maintenance periodicity is at least once per 6 months.

Maintenance steps:

• Disconnect the fan from power supply and make sure electricity has been turned oﬀ (Fig. 14).

• Remove the front and the decorative panels, wipe the fan with a dry cloth or a brush (Fig. 15).

• Clean the front panel under running water (Fig. 16).

• Wipe the fan surfaces dry.

• Cover the fan with the front panel.

• Connect power supply to the fan (Fig. 17).

CAUTION! Do not allow water or liquid come into contact with electric components!

STORAGE AND TRANSPORTATION REGULATIONS

• Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range

from +5 °C to + 40 °C and relative humidity up to 70 %.

• Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion, insulation, and

sealing deformation.

• Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.

• Follow the handling requirements applicable for the particular type of cargo.

• The unit can be carried in the original packaging by any mode of transport provided proper protection against precipitation

and mechanical damage. The unit must be transported only in the working position.

• Avoid sharp blows, scratches, or rough handling during loading and unloading.

• Prior to the initial power-up after transportation at low temperatures, allow the unit to warm up at operating temperature

for at least 3-4 hours.

WARRANTY

- This warranty is given by Blauberg Australasia Pty Ltd, with an oﬃce at U5, 45 Eastern Creek Drive, Eastern Creek, NSW 2766,

Australia. Phone 1300 475 504

- From the date of purchase, the original purchaser is entitled to free replacement parts, or a new unit for a period of ﬁve

years from the date of purchase

- The defective parts or unit must be returned to Blauberg Australasia Pty Ltd at your own cost before an exchange or parts

or unit will be given

- A proof of purchase will be required before a warranty clam is accepted

- The warranty will also not cover damage caused by misuse, neglect, shipping accident, incorrect or improper installation,

voltage supply problems, unauthorised modiﬁcation or repairs of any kind, exposure to corrosive conditions, exposure to

weather and where no fault is found with the product

- We will not cover any loss incurred by you in relation to the product or making the claim under this warranty including

without limitation any costs associated with installation, reinstallation, or transporting the product.

Additional information:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a

replacement of the purchased product for a major failure of the product. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Our ventilation

products also come with a ﬁve years limited warranty given by the distributor Blauberg Australasia Pty Ltd, with an oﬃce at

U5, 45 Eastern Creek Drive, Eastern Creek, NSW 2766, Australia, as set out in the instruction manual in the box. If your product

does not provide the general features and functions described in the user documentation in the ﬁve year period after

delivery to you, please call Blauberg Australasia Pty Ltd, (ABN 85 637 003 582) on 1300 475 504 with details of your product,

serial number and proof of purchase. You maybe required to return the ventilation product to the address listed, in which

case such a return will be at your own cost.

The beneﬁts under this warranty are in addition to other rights and remedies that you may have at law.

FOLLOWING THE REGULATIONS STIPULATED HEREIN WILL ENSURE A LONG AND TROUBLE-FREE

OPERATION OF THE UNIT.

USER’S WARRANTY CLAIMS SHALL BE SUBJECT TO REVIEW ONLY UPON PRESENTATION OF THE

UNIT, THE PAYMENT DOCUMENT AND THE USER’S MANUAL WITH THE PURCHASE DATE STAMP.

Model

Dimensions [mm] Weight

[kg]

a a1 b c d e

BLABQUATRO

100 171 151 108 128 100 32 0.56

125 201 178 113 136 125 35 0.73

150 236 207 165 157 150 38 0.9

Inhaltsverzeichnis

Andere BLAUBERG Lüfter Handbücher

BLAUBERG

BLAUBERG BLABBRAVO Bedienungsanleitung

BLAUBERG

BLAUBERG VENTOErgo A50-1 Pro V.3 Bedienungsanleitung

BLAUBERG

BLAUBERG BlauFast Bedienungsanleitung

BLAUBERG

BLAUBERG BLABAERO Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50C3-1 S8 W V.2 Bedienungsanleitung

BLAUBERG

BLAUBERG Calm Betriebsanleitung

BLAUBERG

BLAUBERG KOMFORT EC DBW 550 Bedienungsanleitung

BLAUBERG

BLAUBERG Auto Betriebsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 Pro Bedienungsanleitung

BLAUBERG

BLAUBERG Centro 100 L Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-P Bedienungsanleitung

BLAUBERG

BLAUBERG Auto Revers series Bedienungsanleitung

BLAUBERG

BLAUBERG KOMFORT L350 Installationshandbuch

BLAUBERG

BLAUBERG VENTO inHOME Wi-Fi Bedienungsanleitung

BLAUBERG

BLAUBERG TwinBox EC 150 Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Design 100 Bedienungsanleitung

BLAUBERG

BLAUBERG BLABDUCTO Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 W Bedienungsanleitung

BLAUBERG

BLAUBERG BLAUBOX ME Series Bedienungsanleitung

BLAUBERG

BLAUBERG Trio Bedienungsanleitung

BLAUBERG

BLAUBERG ISO-RB 100 Bedienungsanleitung

BLAUBERG

BLAUBERG TOWER-V Series Bedienungsanleitung

BLAUBERG

BLAUBERG Kamin 125 Installationshandbuch

BLAUBERG

BLAUBERG Sileo DC 100 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung