BLAUBERG Auto Betriebsanleitung

Service Instructions

Auto

BLAUBERG Company is happy to offer your attention a new

generation product, the BLAUBERG Auto fan.

The solid team of high-qualified professionals with many years

of working experience, technological innovations in design and

production, high-quality components and materials from the top

worldwide producers have become the precondition for the best

fan in its class.

INTRODUCTION

The present service instruction contains a technical description,

technical data sheets, operation and mounting guidelines, safety

precautions and warnings for safe and correct operation of the fan

BLAUBERG Auto.

USE

The BLAUBERG Auto fan is designed for exhaust ventilation of

residential and public premises heated during winter season.

The fan is designed for wall or ceiling mounting (fig. 3-5).

The fan is equipped with automatic shutters to prevent air back drafting

during the fan standby.

COMPLETE SET

fan - 1 item;

screws and dowels - 4 items;

plastic screwdriver (for the models with timer) - 1 item;

service instruction;

packing box.

The fan design is regularly improved, so some models can slightly

differ from those ones described in this service instruction.

Table 1

Switch (S) - built-in pull cord switch;

Timer (T) - turn-off time range from 2 to 30 min;

Humidity sensor (H) - humidity level range from 60% to 90%;

Motion sensor (IR) - reach distance from 1 to 4 m and sensor

viewing angle up to 100°.

The fan does not cause interference with radio-, TV- or video-

equipment.

Service life is not less than 5 years.

Auto ___

Auto ___ S

Auto ___ T

Auto ___ ST

Auto ___ H

Auto ___ SH

Auto ___ IR

BASIC CHARACTERISTICS

The fan designations, parameters, outer view, overall and connecting

dimensions are shown in tables 1, 2, 3 and in fig. 1 and 2.

Auto 100

Auto Still 100

7,9

2300

1715

Auto 125

Auto Still 125

11,8

2400

1930

185

152

Auto 150

Auto Still 150

22,8

2400

1904

295

242

Table 2

Switch Timer Humidity

sensor

Motion

sensor

Max.

air flow [m /h] Power [W] Noise level,

3 m [dBA]

-1

RPM [min ]

Type

Fig. 1

1 - cover; 2 - casing;

3 - motor; 4 - impeller.

166

186

210

150

128

150

115

100

125

150

0,56

0,73

0,9

Auto 100

Auto 125

Auto 150

150

173

195

150

174

196

Fig. 2

Table 3

Dimensions [mm]

Type Weight

[kg]

OPERATION RULES

The fan is rated for connection to 220...240 V / 50 Hz power mains

and is designed for continuous operation always connected to

power mains.

The air motion direction in the system must match the pointer on the

fan casing.

The fan is rated for operation at ambient temperature from +1 °C up

to +45 °C.

The fan does not require grounding.

SAFETY RULES

All operations related to the fan electrical connections, servicing and

repair works are allowed only after the fan disconnection from

power mains.

All mounting and servicing operations are allowed for duly qualified

electricians with valid electrical work permit for electric operations

at the units up to 1000 V after careful study of the present user's

manual.

The single-phase power grid must comply with the acting local electrical

norms and standards. The fixed electrical wiring must be equipped

with an automatic switch that is used for connection of the fan to

power mains with gap on all poles at least 3 mm.

Make sure the impeller and the casing are not damaged before

starting installation. The casing internals must be free of any foreign

objects which can damage the impeller blades.

Misuse of the product or any unauthorized modification are not allowed.

The product is not allowed for use by children and persons with

reduced physical, mental or sensory capacities, without proper practical

experience or expertise, unless they are controlled or instructed

on the product operation by the person(s) responsible for their safety.

Supervise the children and do not let them play with the product.

Take steps to prevent ingress of smoke, carbon monoxide and other

combustion products into the room through open chimney flues or

other fire-protection devices. Sufficient air supply must be provided for

proper combustion and exhaust of gases through the chimney of fuel

burning equipment to prevent back drafting. The maximum permitted

pressure difference per living units is 4 Pa. Operating medium must

not contain any dust or other solid impurities, sticky substances or

fibrous materials.

The fan is not rated for operation in a media that contains hazardous or

explosive materials and vapours, i.e. spirits, gasoline, insecticides, etc.

Do not close or block the fan intake or exhaust vent not to disturb the

natural air passage. Do not sit on the fan and do not put objects

on the fan.

Follow the guidelines of this service instructions to ensure durable

operation of the product.

MOUNTING AND SETUP

The fan is designed for ceiling or wall mounting to extract air into a

ventilation shaft or matching air duct of respective diameter (fig. 3-7).

The fan mounting sequence is shown in fig. 8-9.

The fan wiring diagrams are shown in fig. 10-16.

Fig. 3 Fig. 4

Fig. 5

Fig. 7Fig. 6

Fig. 9

Fig. 8

WIRING DIAGRAMS AND FAN OPERATING LOGIC

S - external switch

QF - automatic switch

Auto 100

Auto 100 S

Fig. 10

Fig. 11

Fan does not run

Switch is

closed

Fan runs

Switch is

opened

Fan does not run

Pull cord switch

Fan runs

Pull cord switch

Auto 100 T

Auto 100 ST

S - external switch

QF - automatic switch

Fig. 12

Fig. 13

2min 30min

Fan does not run

Fan runs

Turn-off delay timer

starts (2 to 30 min)

Pull cord switch

Fan does not run

Switch is

closed

Fan runs

Switch is

opened

Turn-off delay timer

starts (2 to 30 min)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BLAUBERG Lüfter Handbücher

BLAUBERG

BLAUBERG Axis-FP Series Bedienungsanleitung

BLAUBERG

BLAUBERG Helix-z S-Vent Bedienungsanleitung

BLAUBERG

BLAUBERG Turbo 100 Bedienungsanleitung

BLAUBERG

BLAUBERG HRV H 120 Bedienungsanleitung

BLAUBERG

BLAUBERG Kamin 125 Installationshandbuch

BLAUBERG

BLAUBERG Axis-Jet Series Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Eco Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Betriebsanleitung

BLAUBERG

BLAUBERG BLAUBOX ME Series Bedienungsanleitung

BLAUBERG

BLAUBERG ISO-RB 100 Bedienungsanleitung

BLAUBERG

BLAUBERG Komfort Evap Cooler Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 W Bedienungsanleitung

BLAUBERG

BLAUBERG Calm Betriebsanleitung

BLAUBERG

BLAUBERG Centro 100 L Bedienungsanleitung

BLAUBERG

BLAUBERG Box Series Bedienungsanleitung

BLAUBERG

BLAUBERG Centro-M EC 100 Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Design V2 Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-P Bedienungsanleitung

BLAUBERG

BLAUBERG Iso Series Bedienungsanleitung

BLAUBERG

BLAUBERG Auto Revers series Bedienungsanleitung

BLAUBERG

BLAUBERG BlauFast Bedienungsanleitung

BLAUBERG

BLAUBERG AERIS MINI-WHI Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 Pro Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 Pro Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung