Blendtec CLASSIC SERIES Wildside+ Leitfaden

CLASSIC SERIES

OWNER’S MANUAL AND USER GUIDE

TABLE OF CONTENTS

SECTION 1 - IMPORTANT SAFEGUARDS ��1

SECTION 2 - UNPACKING ��3

SECTION 3 - GETTING TO KNOW YOUR BLENDER��3

SECTION 4 - INSTALLATION��4

SECTION 5 - OPERATIONAL OVERVIEW��6

SECTION 6 - CARE AND CLEANING��11

SECTION 7 - TROUBLESHOOTING��12

SECTION 8 - WARRANTY ��13

SECTION 1: IMPORTANT SAFEGUARDS

IMPORTANT INFORMATION

Read all instructions carefully before using your Classic series blender�

Following these instructions will help prevent injuries and damage to the machine and will

ensure that you have the best possible experience with your Classic series blender�

1.1 AVOID CONTACT WITH MOVING PARTS

• ALWAYS keep ﬁngers, hands, hair and clothing away from all moving parts�

• ALWAYS keep all utensils away from the drive socket and blender jar blades during

operation as utensils may damage blades or the blender jar�

• NEVER put hands into the blender jar or add substances by hand when the

blender jar is on the motor base�

• NEVER touch the blade with your ﬁngers whether it is on or off the motor base�

• NEVER place jar into drive socket if blender motor is operating�

• DO NOT rock or remove the blender jar during operation�

These precautions will prevent personal injury and/or damage to the blender�

1.2 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED

If the blender malfunctions, call your service agent ﬁrst� If it is dropped or damaged

in any way, return the blender to a Blendtec service agent immediately for

examination, repair, electrical or mechanical adjustment, or possible replacement�

1.3 NEVER OPERATE BLENDER IN LIQUID

To protect against the risk of electrical shock do not put the motor base in

water or other liquid� Do not use the blender outdoors where it is subject to

precipitation� This will void the warranty�

1.4 NEVER PUT NON-FOOD ITEMS INTO JAR

Utensils, rocks, and glass are dangerous if placed in jar� Damage caused by such

foreign objects will void the warranty� Keep hands and utensils out of jar while

blending to reduce the risk of severe injury to persons or damage to the blender�

Utensils may only be used when the blender is not running�

1.5 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE

1.6 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT

SOLD BY BLENDTEC

The use of any unauthorized attachments may cause ﬁre, electric shock, and/or

injury and will void the warranty�

1.7 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE

APPLIANCE IS OPERATING

1.8 BLADES ARE SHARP! HANDLE CAREFULLY!

1.9 WARNING, DO NOT BLEND HOT LIQUIDS OR OTHER

HOT INGREDIENTS

Starting blend cycles with boiling or very hot liquids may result in burns or cause

the lid to blow off�

1.10 USE CAUTION WHEN BLENDING ON THE HOT SOUP CYCLE

When blending on the Hot Soup cycle, friction of the blade will heat the contents�

The vented lid will allow pressure relief� Be careful not to come in contact with any

steam coming from the clear center lid�

1.11 POWER CORD PRECAUTIONS

• NEVER operate with a damaged cord or plug� If the supply cord is damaged it must

be replaced by the manufacturer or authorized service agent to avoid a hazard�

• DO NOT permit the cord to hang over the edge of the work surface�

• NEVER use an extension cord with the unit�

• Unplug the blender motor when not in use, before changing blender locations, or

cleaning�

1.12 NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender motor cover. The blender motor does

not contain self-adjustable or serviceable parts. A qualiﬁed service

agent must make all service adjustments. Removing the cover or

attempting to service the blender will void the warranty.

1.13 TURN THE POWER SWITCH OFF WHEN NOT IN USE

The Power Switch (ON/OFF switch) is located on the back of the blender motor cover�

1.14 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER

EXTENSIVE USE

The blender drive socket may become hot after numerous cycles�

1.15 SAFETY

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety� Children should be

supervised to ensure that they do not play with the appliance�

1.16 THE CLASSIC SERIES BLENDER IS INTENDED FOR

HOME USE ONLY! ANY USE OF THIS BLENDER FOR

COMMERCIAL PURPOSES VOIDS ALL WARRANTIES

1.17 NEVER OPERATE THE BLENDER WITH MORE THAN THE

MARKED CAPACITY OF THE JAR

SAVE THESE INSTRUCTIONS

SECTION 2: UNPACKING

SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE

2.1 UNPACKING YOUR BLENDER

You should have received the following items:

• Classic series motor base

• Blender jar with lid

• Blendtec 101 booklet

• Customer Service and Warranty Registration Card

Additional literature may be included depending on package conﬁguration�

1� Remove blender motor base, blender jar, and lid from packaging�

2� Unwind the power cord�

3� Check for any packing material that may have blocked ventilation holes on the

underside of the blender motor base�

4� Inspect all items to ensure no damage occurred during shipment�

5� If any damage has occurred, contact your Blendtec service agent immediately�

2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE

Record your blender motor serial number and date of purchase in the space below�

You will need these when contacting Blendtec for service or questions�

Motor Serial #(Found on bottom of motor base):_________________________

Date of Purchase: ______________________________________________

Purchased From: _______________________________________________

2.3 REGISTRATION OF YOUR BLENDER

SECTION 3: GETTING TO KNOW YOUR BLENDER

(Refer to Figures 1 and 2)

3.1 BLENDER MOTOR BASE

• Touchpad: Consists of one-touch pre programmed cycles and speeds, as well as

Stop and Pulse buttons�

• Hardened Metal Drive Socket: Where the jar couples with the motor to turn the

blade assembly; made of hardened metal�

• LCD Information Center: Displays the number of times a blend cycle button has

been pressed�

• Power Unit: This unit is located within the blender motor base and contains the

computerized electronics that run the blender�

• Motor Base Cover: Houses the power unit in a durable, plastic material�

• Power Switch: Located on the back lower-right corner of the motor base cover�

• Power Cord: Located at the back of the motor base cover�

3.2 BLENDER JAR ASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly, and lid�

• Jar: Durable, BPA-free jar; easy to clean�

• Blade Assembly: Uniquely designed stainless steel blade provides fast,

consistent blending�

• Lid: Vented gripper lid seals liquids within the jar during blending�

NOTE: Filling the blender jar beyond the marked capacity is not recommended.

SECTION 4: INSTALLATION

1� Place the blender on a ﬂat, clean, and dry surface� Blender vents should be

unobstructed to allow proper cooling during use�

2� Make sure an outlet is available within two feet (61cm) of the blender motor�

3� Ensure the Power Switch located on the back of the motor base is turned off before

plugging it in�

4� Turn unit on by toggling the Power Switch to the ON position�

5� Place appropriately ﬁlled blender jar, with lid in place, onto blender base�

6� We recommend that surge protection be placed between the receptacle and

the blender motor�

SECTION 5: OPERATIONAL OVERVIEW

5.1 QUICK RECIPE INSTRUCTIONS –

Use these steps to get started right away.

1� Choose a recipe from the included Blendtec Blending 101 booklet�

2� Gather all of the ingredients�

3� Load the blender jar as indicated in the recipe�

4� Plug in the blender�

5� Attach the blender lid to the jar; ensure that it sits on the jar completely�

6� Turn on the main power switch located on the back of the blender motor base�

7� Place the blender jar onto the base, making sure the jar is secure and fully seated on

the motor base�

8� Attach the blender lid to the jar; ensure that it sits on the jar completely�

9� Press the indicated touch pad button from the recipe once

(or as indicated in the recipe)�

10� When cycle is complete, remove the blender jar from the blender base�

11� Remove the jar lid and serve as indicated in the recipe�

12� For best cleaning results, clean immediately after blending�

(See CARE AND CLEANING, 6�1)

5.2 ALL ABOUT BLEND CYCLES

Blend cycles are timed cycles designed for speciﬁc types of blends� These

one-touch cycles speed up, slow down, and shut off automatically, so results

are perfect every time�

Each blender in the Classic series features a number of pre programmed cycles

and settings that provide a wide range of recipes and functions*:

Smoothie — Fruit smoothies, green smoothies, milkshakes

One-Touch Timed — Used to blend ingredients for a 60-second or

90-second timed cycle

Clean — Automatic cleaning cycle

Incremental Speed — 50-second cycles that blend at Lo, Medium-Lo,

Medium, Medium-Hi, and Hi speeds

Stop — Stops the blender at any point during blending

Hot Soup — soups, hot chocolate, syrups, fondues

Pulse — used to quickly stir, chop, or mince at a high speed

*Interfaces and cycles will vary depending on model number

5.3 CLASSIC 475™

SMOOTHIE

This cycle is designed speciﬁcally for various types of smoothies and thick

drinks that frequently use dense or frozen ingredients� It slows down and

speeds up automatically during the course of the cycle� This allows the blender

to draw the ingredients into the blending vortex, creating the desired texture�

INCREMENTAL SPEEDS

The Classic 475 comes with three incremental speed cycles that allow you to

completely customize the consistency of your blend� Each manual cycle is 50

seconds long and blends at the following speeds:

• Lo: Speed 1

• Medium: Speed 5

• Hi: Speed 9

You can switch to a different speed at any point during the cycle� To stop the

cycle at any point during blending, press Stop�

PULSE

The Pulse function is used for chopping, mincing, whipping, or other momentary

tasks that do not require a long blend cycle� You can also Pulse to quickly stir

a blend before serving�

The Pulse setting runs at speed 7 and will only run while the Pulse icon

remains pressed� When the icon is released, the motor shuts off�

5.4 CLASSIC 560™

INCREMENTAL SPEEDS

The Classic 560 comes with four incremental speed cycles that allow you to

completely customize the consistency of your blend� Each manual cycle is 50

seconds long and blends at the following speeds:

• Lo: Speed 1

• Medium: Speed 5

• Medium-hi: Speed 7

• Hi: Speed 9

You can switch to a different speed at any point during the cycle� To stop the

cycle at any point during blending, press Stop�

PULSE

The Pulse function is used for chopping, mincing, whipping, or other momentary

tasks that do not require a long blend cycle� You can also Pulse to quickly stir

a blend before serving�

The Pulse setting runs at speed 7 and will only run while the Pulse icon

remains pressed� When the icon is released, the motor shuts off�

Inhaltsverzeichnis

Andere Blendtec Mixer Handbücher

Blendtec

Blendtec Wildside Plus Designer Series Leitfaden

Blendtec

Blendtec Designer Series WildSide Bedienungsanleitung

Blendtec

Blendtec Mix n Blend II Kurzanleitung

Blendtec

Blendtec NITRO Blending Systems 2.0 Bedienungsanleitung

Blendtec

Blendtec Mix n Blend II Kurzanleitung

Blendtec

Blendtec Signature Series Bedienungsanleitung

Blendtec

Blendtec CLASSIC SERIES Leitfaden

Blendtec

Blendtec PROFESSIONAL 800 Leitfaden

Blendtec

Blendtec DESIGNER 625 Bedienungsanleitung

Blendtec

Blendtec DESIGNER SERIES Leitfaden

Blendtec

Blendtec CLASSIC SERIES Leitfaden

Blendtec

Blendtec HP3A Home Bedienungsanleitung

Blendtec

Blendtec CLASSIC SERIES Leitfaden

Blendtec

Blendtec Stealth Bedienungsanleitung

Blendtec

Blendtec ES3 Bedienungsanleitung

Blendtec

Blendtec Total Blender Classic Combo Bedienungsanleitung

Blendtec

Blendtec Tom Dickson Extreme Blender Bedienungsanleitung

Blendtec

Blendtec 625D Bedienungsanleitung

Blendtec

Blendtec A3-31E-BHMV Bedienungsanleitung

Blendtec

Blendtec Brawn Bedienungsanleitung

Blendtec

Blendtec Q-SERIES Bedienungsanleitung

Blendtec

Blendtec TotalBlender DesignerSeries Leitfaden

Blendtec

Blendtec Classic Bedienungsanleitung

Blendtec

Blendtec Rapid Rinser Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Ninja

Ninja NN210Q Bedienungsanleitung