Blizzard Lighting ToughStick 5 Bedienungsanleitung

Blizzard Lighting, LLC

www.blizzardlighting.com

Waukesha, WI USA

TOUGHSTICK

SUITABLE FOR OUTDOOR USE

Page 2

TABLE OF CONTENTS

ToughStick™ 5 1

1. Getting Started 3

What’s In The Box? 3

Getting It Out Of The Box 3

Powering Up! 3

Getting A Hold Of Us 3

Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4

2. Meet The ToughStick™ 5 5

Features 5

DMX Quick Reference 5

The ToughStick™ 5 Pin-up Picture 6

3. Setup 7

Fuse Replacement 7

Connecting A Bunch Of ToughStick™ 5 Fixtures 7

Data/DMX Cables 7

Cable Connectors 8

3-Pin??? 5-Pin??? Huh? 8

Take It To The Next Level: Setting up DMX Control 8

Fixture Linking (Master/Slave Mode) 9

Mounting/Rigging 9

4. Operating Adjustments 10

Navigating The Control Panel 10

Control Panel Menu Structure 11

DMX Mode 12

Master/Slave Mode 12

Sound Active Mode 12

Standalone (Program) Mode 12

Manual Color Adjustment 12

DMX Channel Values In-Depth 13

Troubleshooting 14

5. Appendix 15

A Quick DMX Lesson 15

Keeping Your ToughStick™ 5 As Good As New 16

Returns (Gasp!) 16

Shipping Issues 16

Tech Specs 17

Page 3

1. GETTING STARTED

What’s In The Box?

 •1xToughSTICK™5

 •1xWaterproofPowerCable

 •2xWaterproofDMXCables(1male,1female)

 •2xMountingBrackets

 •ThisLovelyUserManual

Optional Accessories (sold separately)

Thefollowingaccessoriesareavailableforthisxture.Butthelonewolvesthattheyare,they

must be purchased separately. Contact your authorized Blizzard Lighting dealer for pricing!

•DMX-EXT:3-MeterIP-RatedDMXExtensionCable

•PWR-EXT:3-MeterIP-RatedPowerExtensionCable

Getting It Out Of The Box

Congratulationsonpurchasingoneofthemostrockingbox-shapedPARxturesanywhere!Now

thatyou’vegotyourToughStick™5xture(orhopefully,ToughStick 5’s!), you should carefully

unpack the box and check the contents to ensure that all parts are present and in good condi-

tion. If anything looks as if it has been damaged in transit, notify the shipper immediately and

keep the packing material for inspection. Again, please save the carton and all packing materi-

als.Ifaxturemustbereturnedtothefactory,itisimportantthatthexturebereturnedin

the original factory box and packing.

Powering Up!

Allxturesmustbepowereddirectlyoffaswitchedcircuitandcannot be run off a rheostat

(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used

solely for a 0% to 100% switch.

AC Voltage Switch -Notallxtureshaveavoltageselectswitch,sopleaseverifythatthexture

youreceiveissuitableforyourlocalpowersupply.Seethelabelonthextureorrefertothe

xture’sspecicationschartformoreinformation.Axture’slistedcurrentratingisitsaverage

currentdrawundernormalconditions.Checkthextureordevicecarefullytomakesurethatif

a voltage selection switch exists that it is set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line voltage

applied. Damage to your xture may result if the line voltage applied does not match

the voltage indicated on the voltage selector switch. All xtures must be connected to

circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email. We’ll be happy to help,

honest.

Blizzard Lighting

N16W23390StoneridgeDr.SuiteE

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Email:[email protected]

Disclaimer:Theinformationandspecicationscontainedinthisdocumentaresubjectto

change without notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or

omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update

the existing document or to create a new document to correct any errors or omissions at any

time. You can download the latest version of this document from www.blizzardlighting.com.

Author: Date: Last Edited: Date:

J. Thomas 7/31/2013 J. Thomas 7/31/2013

Page 4

SAFETY INSTRUCTIONS

•PleasekeepthisUserGuideforfutureuse.Ifyouselltheunittosomeone

else, be sure that they also receive this User Guide.

•ALWAYSmakesurethatyouareconnectingtothepropervoltage,andthat

the line voltage you are connecting to is not higher than that stated on the de-

calorrearpanelofthexture.

•Thisproductisintendedforindooruseonly.

•Topreventriskofreorshock,donotexposexturetorainormoisture.

•Makesuretherearenoammablematerialsclosetotheunitwhileoperating.

•Theunitmustbeinstalledinalocationwithadequateventilation,atleast

20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are

blocked.

•ALWAYSdisconnectfromthepowersourcebeforeservicingorreplacingfuse

and be sure to replace with same fuse size and type.

•ALWAYSsecurextureusingasafetychain.NEVERcarrythexturebyits

cord. Use its carrying handles.

•DONOToperateatambienttemperatureshigherthan104°F(40°C).

•Intheeventofaseriousoperatingproblem,stopusingtheunitimmediately.

NEVERtrytorepairtheunitbyyourself.Repairscarriedoutbyunskilledpeople

can lead to damage or malfunction. Please contact the nearest authorized tech-

nical assistance center. Always use the same type spare parts.

•NEVERconnectthedevicetoadimmerpack.

•Makesurethepowercordisnevercrimpedordamaged.

•Neverdisconnectthepowercordbypullingortuggingonthecord.

•Avoiddirecteyeexposuretothelightsourcewhileitison.

Caution! There are no user serviceable parts inside the unit. Do not

open the housing or attempt any repairs yourself. In the unlikely event

yourunitmayrequireservice,pleasecontactBlizzardLightingatsup-

[email protected].

Page 5

2. MEET THE TOUGHSTICK™ 5 LED FIXTURE

CONTROL FEATURES

•RGBAWcolormixingvia9x15W5-in-1LEDs

•Variableelectronicstrobe

•Variableelectronicdimmer

•Built-incolor&chasemacrosviaDMX

•Built-inautomatedprogramsviamaster/slave

•RGBAWcolormixingabilityinstandalonemode

•EasytouseLEDcontrolpanel

ADDITIONAL FEATURES

•Builtlikeabrickhmmhmmwithanodizedaluminumenclosureandtempered

glass top.

•Totallysilentconvectioncooling

•IPRatedACpowercordwithcablecap

•IPRatedDMXin/outcables

•Dualmountingbracketsforpositioningexibility

DMX Quick Reference - 9 / 10 Channel Mode

Channel 9-Channel 10-Channel

1 Dimmer Dimmer

2 Red Intensity Red Intensity

3 Green Intensity Green Intensity

4 Blue Intensity Blue Intensity

5 Amber Intensity Amber/UV Intensity

6 White Intensity White Intensity

7 Strobe Strobe

8 Built-in Programs Built-in Programs

9 Program Speed Program Speed

10 --- 32-Bit Dimmer

DMX Quick Reference - 4-Channel (HSV) / 5-Channel Mode

Channel HSV 5-Channel

1 RGB Color Mixing Red Intensity

2 Amber Intensity Green Intensity

3 White Intensity Blue Intensity

4 Dimmer Amber/UV Intensity

5 --- White Intensity

Page 6

Figure 1: The ToughStick™ 5 Pin-Up Picture

9x 15-watt 5-in-1

RGBAWLED’s

Black Powder Coated

Aluminum Housing

LEDControlPanel

Figure 2: The Rear Connections

AC Power In

3-Pin

DMX512 In

AC Power Out

3-Pin

DMX512 Out

Extended,waterproofACpowerand3-pinDMXconnections.

Mounting Brackets with

Adjustment&LockingKnobs

IP65-Rated

WeatherproofPower&

DMX Connections

Page 7

3. SETUP

Fuse Replacement

CAUTION! The ToughStick™ 5 utilizes a high-output switch-mode

power supply with an internal fuse. Under normal operating condi-

tions,thefuseshouldnotrequirereplacement.Thefuseiseld

replaceable,howeveritisanadvancedproceduresuitedtoqualied

individuals.ShouldyourToughStick™5fuserequirereplacement,

please contact Blizzard Lighting for instructions, or to return your unit

for service.

Connecting A Bunch of ToughStick™ 5 Fixtures

You will need a serial data link to run light shows using a DMX-512

controllerortorunshowsontwoormorexturessettosyncinmas-

ter/slaveoperatingmode.Thecombinednumberofchannelsrequired

byallthexturesonaserialdatalinkdeterminesthenumberofx-

tures the data link can support.

Fixtures on a serial data link must be daisy chained in one single line.

Also,connectingmorethan32xturesononeserialdatalinkwithout

the use of a DMX optically-isolated splitter may result in deterioration

of the digital DMX signal.

The maximum recommended cable-run distance is 500 meters (1640

ft).Themaximumrecommendednumberofxturesonaserialdata

linkis32xtures.

Data/DMX Cabling

Tolinkxturestogetheryou’llneeddatacables.Youshouldusedata-

gradecablesthatcancarryahighqualitysignalandarelessproneto

electromagnetic interference.

Forinstance,Belden©9841meetsthespecicationsforEIARS-485

applications. Standard microphone cables will “probably” be OK, but

note that they cannot transmit DMX data as reliably over long distanc-

es. In any event, the cable should have the following characteristics:

2-conductor twisted pair plus a shield

Maximum capacitance between conductors – 30 pF/ft.

Maximum capacitance between conductor & shield – 55 pF/ft.

Maximum resistance of 20 ohms / 1000 ft.

Nominal impedance 100 – 140 ohms

Page 8

Cable Connectors

Cables must have a male XLR connector on one end and a female XLR

connector on the other end. (Duh!)

CAUTION:Donotallowcontactbetweenthecommonandthex-

ture’s chassis ground. Grounding the common can cause a ground

loop,andyourxturemayperformerratically.Testcableswithan

ohm meter to verify correct polarity and to make sure the pins are not

grounded or shorted to the shield or each other.

3-Pin??? 5-Pin??? Huh?!?

If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter.

They are widely available over the internet and from specialty retailers If you’d like to build your own, the

chart below details a proper cable conversion:

Conductor 3-Pin Female

(Output)

5-Pin Male

(Input)

Ground/Shield Pin 1 Pin 1

DMX Data (-) Pin 2 Pin 2

DMX Data (+) Pin 3 Pin 3

Not Used. No Connection. No Connection.

Take It To The Next Level: Setting Up DMX Control

Step 1: Connect the male connector of the

DMX cable to the female connector (output)

on the controller.

Step 2: Connect the female connector of the

DMXcabletotherstxture’smaleconnec-

tor (input). Note: It doesn’t matter which

xtureaddressistherstoneconnected.

Werecommendconnectingthexturesin

terms of their proximity to the controller,

ratherthanconnectingthelowestxture

numberrst,andsoon.

Step 3:Connectotherxturesinthechain

from output to input as above. Place a DMX

terminatorontheoutputofthenalxture

to ensure best communication.

Page 9

Fixture Linking (Master/Slave Mode)

1. Connect the (male) 3 pin connector side of the

DMX cable to the output (female) 3 pin connector of

therstxture.

2. Connect the end of the cable coming from the

rstxturewhichwillhavea(female)3pinconnec-

tortotheinputconnectorofthenextxturecon-

sisting of a (male) 3 pin connector. Then, proceed

to connect from the output as stated above to the

inputofthefollowingxtureandsoon.

A quick note: Often,

the setup for Master-

Slave and Standalone

operationrequiresthat

therstxtureinthe

chain be initialized for

this purpose via either

settings in the control

panel or DIP-switches.

Secondarily,thextures

that follow may also re-

quireaslavesetting.

Check the “Operating Adjustments” section in this manual for com-

pleteinstructionsforthistypeofsetupandconguration.

Mounting & Rigging

ThisxturemaybemountedinanySAFEpositionprovidedthereis

enough room for ventilation.

It is important never to obstruct the fan or vents pathway. Mount the

xtureusingasuitable“C”or“O”typeclamp.Theclampshouldbe

ratedtoholdatleast10xthexture’sweighttoensurestructuralsta-

bility. Do not mount to surfaces with unknown strength, and ensure

properly“rated”riggingisusedwhenmountingxutresoverhead.

Adjust the

angleofthexturebylooseningbothknobsandtiltingthexture.

Afterndingthedesiredposition,retightenbothknobs.

•Whenselectinginstallationlocation,takeintoconsiderationlamp

replacement access (if applicable) and routine maintenance.

•SafetycablesMUSTALWAYSbeused.

•Nevermountinplaceswherethexturewillbeexposedtorain,

high humidity, extreme temperature changes or restricted ventilation.

Page 10

4. OPERATING ADJUSTMENTS

The Control Panel

All the goodies and different modes possible with the ToughStick™

5areaccessedbyusingthecontrolpanelontherearofthexture.

Thereare4controlbuttonsbelowtheLEDdisplaywhichallowyouto

navigate through the various control panel menus.

<MENU>

Is used to navigate to the previous higher-level menu item.

<UP>

Scrolls through menu items and numbers in ascending order.

<DOWN>

Scrolls through menu items and numbers in descending order.

<ENTER>

Isusedtoselectandconrm/storethecurrentselection.

TheControlPanelLEDDisplayshowsthemenuitemsyouselectfrom

the menu map on page #11. When a menu function is selected, the

displaywillshowimmediatelytherstavailableoptionfortheselected

menu function. To select a menu item, press <ENTER>.

Press the <MENU> button repeatedly until you reach the desired

menu function. Use the <UP> and <DOWN> buttons to navigate the

menu options. Press the <ENTER> button to select the menu function

currently displayed, or to enable a menu option. To return to the previ-

ous option or menu without changing the value, press the

<MENU> button.

Inhaltsverzeichnis

Andere Blizzard Lighting Beleuchtungsausrüstung Handbücher

Blizzard Lighting

Blizzard Lighting Torrent Streak Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting the puck Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting SPOTMAN Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting REANIMATOR Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Lo-Pro Flux Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Motif Sketch Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting HUSH PAR Theatrik Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting ToughPar V12 Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting KRYO.MIX CMY Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Flurry TRI Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting COLORISE Exa Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting BladeRunner RGBW Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting HotBox RGBW/RGBA Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting mikrokassette Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting infinipix cyclone Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting PixlStik Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Torrent 90 Beam Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Motif Metro Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck Pro Zoom EXA Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting ICE 30 Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting ProPar V12 Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Torrent 90 Beam Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting G-Mix 200 Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting RokBox Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung