Blu Stream RX70CS Bedienungsanleitung

RX70CS QUICK REFERENCE GUIDE

www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk

RX70CS

Quick Reference Guide

Our RX70CS HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 HDBaseT™ ARC Receiver

oers market leading features and outstanding value utilising CSC technology.

The product extends HDMI,Bi-directional IR & RS-232 and and is powered by the

matrix up to lengths of 70m (4K 40m). The Receiver features ARC support when

used with compatible Blustream hardware and simultaneous analogue stereo and

Optical Toslink audio breakout.

Introduction

FEATURES:

• Advanced HDBaseT™ technology oering distribution of video and audio over a single CAT cable

• Advanced Colour Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR

• Extends HDMI 1080p up to a distance of 70m over a single CAT cable

• Supports 4K 60Hz 4:4:4 UHD video up to 40m

• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K

• Automatic downscaling of up to 4K 60Hz 4:4:4 video input to 1080p

• Supports ARC (Audio Return Channel) from connected display via HDMI or Optical digital inputs (when used with

compatible Blustream transmitter / matrix)

• Supports all known HDMI audio formats including Dolby TrueHD, Atmos and DTS-HD Master Audio transmission

• Bi-directional RS-232 pass-through

• Supports bi-directional IR pass-through to compatible HDBaseT™ device

• Supports PoC (Power over Cable) from Blustream matrix or transmitter products

• HDCP 2.2 support

RX70CS QUICK REFERENCE GUIDE

Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 02

Panel Descriptions

Front Rear

1Power status indicator

2HDMI signal link indicator

3ARC Mode selection switch. Alters PoC mode when used with compatible ARC enabled Matrix products - see below

4Optical audio input - Toslink audio input. Connects to the Optical output of the local display device for Audio Return

Channel feature

5RS-232 Port Mode selection switch. Firmware upgrade mode or normal operating mode.

6HDBaseT™ input

7RS-232 3-pin Phoenix connector

8IR IN (to Blustream 5V 3.5mm IR receiver)

9IR OUT (to Blustream 5V 3.5mm IR emitter)

qHDMI Output - connect to HDMI on display

wOptical Toslink audio output. Connects to local AV amplifier and allows local HDMI audio breakout

eAnalogue audio Le / Right output - 3.5mm stereo jack de-embedded audio from HDMI input.

Supports stereo 2ch PCM audio only

e12V/1A DC power input screw type connector

421 3 6 7 8 9 10 11 12 13

Advanced Functions

The RX70CS has been designed to partner with all Blustream HDBaseT™ matrix products and will receive audio and

video from these devices, as well as bi-directional IR and RS-232 control. Advanced functions such as ARC and CSC will

only function with a compatible Matrix or Transmitter product.

The below chart outlines the matrix products that support these advanced functions:

MATRIX / TRANSMITTER CSC ARC

HMXL88ARC Yes Yes

HMXL66ARC Yes Yes

HMXL42ARC Yes Yes

AMF42AU Yes Yes

C88CS Yes No

C66CS Yes No

RX70CS QUICK REFERENCE GUIDE

www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk

Terminating the Interconnecting HDBaseT™ CAT Cable

It is important that the interconnecting CAT cable between the Blustream HDBaseT™ products is terminated using the

correct RJ45 pin configuration. The link CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable and it is advised that this

is wired to the T568B wiring standard as this format is less prone to EMI (Electro-Magnetic Interference).

When installing CAT cables it is advised that you use the best possible CAT cable quality possible. HDMI distribution

products will only work if used with CAT5e standard cable or above. Blustream recommends using a CAT6 (or better)

cable for your installations, especially when running over longer distances, in areas of high EMI, or for 4K signal

distribution.

Understanding the HDBaseT™ Signal Status Lights

The Blustream HDBaseT extender solutions include status LED indicators on both the Matrix/Transmitter and Receiver

products to show all connections are active and to help diagnose possible problems.

Understanding the Status Lights

Receiver:

• The HDMI signal link light will be o when there is no connection with a display/sink

• The HDMI link light will be on when there is an active connection with a display

• The HDBaseT link light will be o when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT

input

• The HDBaseT link light will blink if there is an unstable connection between the Transmitter/Matrix and Receiver

• The HDBaseT link light will be lit when a CAT cable is connected to the HDBaseT RJ45 output on the Transmitter/

Matrix and an active connection is achieved with the Receiver

• The Power link light will be o when no power is connected to the Receiver, or to the connected Transmitter unit

• The Power link light will be on when power is connected directly to the Receiver or is being received from the

Transmitter unit

Transmitter:

• The HDMI signal link light will be o when there is no connection with a source device

• The HDMI link light will be on when there is an active connection with a source device

• The HDBaseT link light will be o when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT

output

• The HDBaseT link light will blink if there is an unstable connection between the Transmitter and Receiver/Matrix

• The HDBaseT link light will be lit when a CAT cable is connected to the HDBaseT RJ45 output on the Transmitter

and an active connection is achieved with the Receiver/Matrix.

• The Power link light will be o when no power is connected to the Transmitter, or to the connected Receiver unit

• The Power link light will be on when power is connected directly to the Transmitter or is being received from the

Receiver unit

RJ45 Wiring - T568B

RX70CS QUICK REFERENCE GUIDE

Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk

RevA1_RX70CS_QRG

Package ContentsSpecifications

RX70CS

• 1 x RX70CS

• 1 x Mounting Bracket Set

• 1 x Quick Reference Guide

Maintenance

Clean this unit with a so, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.

NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate.

RX70CS

• Video Input Connectors: 1 x HDBaseT™ RJ45 connector

• Video Output Connectors: 1 x HDMI Type A, female

• RS232 Input Port: 1 x 3-pin Phoenix connector

• IR Input Port: 1 x 3.5mm stereo jack

• IR Output Port: 1 x 3.5mm mono jack

• Mounting Kit included

• Casing Dimensions (W x H x D): 140 x 84 x 18mm

• Dimensions Including Connections (W x H x D): 140 x 98 x

18mm

• Power Supply: 12V/1A DC, screw type connector (not

included)

• Shipping Weight: 0.5Kg

• Operating Temperature: 32°F to 104°F (-5°C to +55°C)

• Storage Temperature: -4°F to 140°F (-25°C to +70°C)

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

CANADA, INDUSTRY CANADA (IC) NOTICES

This Class B digital apparatus complies with Canadian ICES-003.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and collection systems or contact the retailer where the product was

purchased. They can take this product for environmentally safe recycling.

Certifications

Inhaltsverzeichnis

Andere Blu Stream Empfänger Handbücher

Blu Stream

Blu Stream HEX11WP-RX Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung