Blueant Z9i Bedienungsanleitung

USER MANUAL

Dual mic with Voice Isolation

BLUETOOTH HEADSET

ENGLISH

BlueAnt

Z9i USER GUIDE

Introduction

The BlueAnt Z9i Dual Microphone portable mono headset utilizes Bluetooth Wireless Technology. Its dual microphones

combined with the BlueAnt Voice Isolation Technology™ software, provide the BlueAnt Z9i with revolutionary clear and

clean voice input enabling high quality voice communications. Winner of the prestigious CES 2007 Design and Engineering

award, the BlueAnt Z9i is the next generation in Noise Suppression, Echo Cancellation and Wind Noise Reduction for

Bluetooth headsets.

There are two settings of Voice Isolation - STANDARD and MAX.

Voice Isolation Standard is for use in normal environments and gives you a natural sounding voice removing mild noise.

Voice Isolation Max gives you superior voice clarity in a wide variety of high noise areas.

BlueAnt

Features of the BlueAnt Z9i

• Winner of CES 2007 Innovations Design & Engineering Award

• Two microphones for pure speech

• Voice Isolation Technology ™ BlueAnt’s revolutionary Digital Signal Processor (DSP) software

• During a call, users can switch between two Voice Isolation modes – Standard and Max

• This world class DSP provides echo suppression, noise reduction and wind noise reduction which separates the

desired voice signal from background noise enabling crystal clear conversation in even the noisiest of environments

• The Z9i can be paired with 5 devices

• Multi-point, connect two phones at once and answer whichever rings

• Different ringtones for known and unknown contacts

• Innovative tie clip for attaching to shirt or cuff, when not in use

• Small & lightweight (1.5” in length & weighs only 0.35 oz) (41mm &10grams)

• Stylish, translucent ear hook

• Up to 5.5 hrs talk-time or 200 hrs standby

• 2 Year Replacement Warranty

• Bluetooth v2.0

What is Bluetooth wireless technology?

Bluetooth is the most advanced cable-replacement technology available today. It enables effortless wireless connections

between your Bluetooth devices within a range of up to 10m (30 ft).

ENGLISH

BlueAnt

What devices work with the Z9i Dual

Microphone?

Your headset is a Bluetooth V2.0 qualiﬁed product and

supports both the Headset and Handsfree Bluetooth

proﬁles. The Z9i can store information and wirelessly

interact with up to ﬁve different Bluetooth V1.1, V1.2 or V2.0

compliant devices (backward and forward compatible),

including mobile phones, PDA’s, PC’s / Mac’s or any

Bluetooth enabled device that supports Headset proﬁle or

Handsfree proﬁle. This manual focuses on how to use your

headset with your Bluetooth enabled phone.

What’s in the Package?

>A BlueAnt Z9i Dual Microphone Bluetooth Headset

>1 metal ear hook

>1 translucent ear hook

>Small and Large Ear bud

>USB Cable

>AC Adaptor

>Quick Start Guide

>User Manual

>Warranty Card

MFB (Multi

Function Button)

Volume Up

Volume Down

Ear Hook Speaker

USB

Overview

BlueAnt

Getting Started

Before you can use your headset, you must do the following two things:

1. Fully charge your headset using one of the chargers provided.

2. Pair your headset with a Bluetooth enabled device, e.g. Cell phone, PDA, Computer

Charging

Your Z9i comes with a built-in rechargeable battery. For ﬁrst time use, you must fully charge your Z9i. During charging, the

indicator shows a steady Red light. When the battery is fully charged, the Red light will turn off. It takes 120-150 minutes

to fully charge the battery. The more you talk using your headset, the less standby time your battery has. Your headset will

require longer charging times when not used over extended periods of time.

Charging the Z9i with the USB connecter

1. Plug the USB charging cable into the PC/Mac’s USB port

2. Plug the other end of the USB charging cable into the charging port of your headset. Make sure the USB plug matches up

to the USB socket on the headset. Do not force the plug into the socket, it should slide in easily. The Red LED will turn ON.

3. When charging is complete the Red LED will turn OFF. Remove the charging adapter.

Charging the Z9i with the Wall Charger

1. Plug the AC Charger into a power socket and the cable into the charging port on the Z9i. Make sure the USB plug matches

up to the USB socket on the headset. Do not force the plug into the socket it should slide in easily. The Red LED will turn ON.

2. When charging is complete the Red LED will turn OFF. Remove the charging adapter.

ENGLISH

BlueAnt

For optimal performance of the Z9i

headset, angle the headset so that it

points towards your mouth.

Wearing the BlueAnt Z9i

Pushtheearhookthrough the ear hook hole whichsitsontheheadset

clip and adjust its length to ﬁt comfortably on your ear. Ensure that

the headset is pointing towards your mouth. You can wear the Z9i on

left or right ears.

BlueAnt

Swapping the Ear Gels

The Z9i comes with two sizes of Ear gels. The larger ear gel is ﬁtted on the unit already.

If you wish to use the smaller ear gel instead, please unscrew (anti-clockwise) the large ear bud and screw on (clockwise)

the smaller one.

Be sure to gently unscrew the Ear bud and do not over tighten when ﬁxing the smaller gel.

Gently screw anti-clockwise to remove,

Gently screw clockwise to attach.

ENGLISH

BlueAnt

Pairing

Before use, you must pair the headset with your cell phone. Pairing will create a stored connection in both the Z9i and your

Bluetooth cell phone. Pairing need only be done once, when ﬁrst connecting to a new phone. The Z9i can store pairing

information for up to ﬁve (5) different Bluetooth devices. If you wish to pair another different device once 5 devices are

paired, you will need to RESET the Z9i as per the instructions in Basic Headset Functions below.

Pairing Procedure (This is an example only and may differ from your phone, but the process will be the same.)

1. First turn the phone OFF and then back ON again to refresh its memory.

2. Bring the mobile phone to about 30cm from the Z9i Dual Microphone.

3. Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide if necessary)

With the Z9i OFF, Press and Hold the MFB for about 6 seconds. The LED will appear a solid Blue, and then will start ﬂashing. The

Z9i is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will be active for 2 minutes.

5. Perform a Bluetooth device discovery on your mobile phone to add a new device. (It takes a few seconds to search for

and ﬁnd other Bluetooth devices around you).

6. When Bluetooth devices are found, the phone will display “BlueAnt Z9i”. Scroll to it and press OK to conﬁrm that you

want to Pair with it.

7. Enter Passkey “0000” when your phone prompts you. The phone and Z9i will now Pair.

8. An additional security setting in your phone may be needed to allow the headset and phone to connect automatically

without conﬁrmation each time you connect your Z9i. Generally in the options for the BlueAnt Z9i, it will be referred to as

“set as authorized”, “add to trusted devices”, ‘’allow connection’’ or similar.

9. If required for ﬁrst time connection, select the BlueAnt Z9i to connect with your phone. OR, Click the MFB on the Z9i,

to connect with the phone.

BlueAnt

Basic Headset Functions

For easy reference, also see the Button/Function Matrix and the Quick Start Guide.

1. Power ON: Press and Hold the MFB

for 3 seconds. The solid Blue LED will light up, and if the battery has ample charge

the Blue LED will stay on for up to 5 Seconds. If the battery is low a solid Red LED will be displayed. After powering ON, your

headset will automatically connect to your last used phone if it is in operating range. If this phone is not range, the Z9i will

enter idle mode after 60 seconds. If no phone has yet been Paired, the Z9i will enter into Pairing mode.

2. Power OFF: Press and Hold the MFB

for 3 seconds. The Red LED ﬂashes three times.

3. Enter Pairing Mode: With the Z9i OFF, Press and Hold the MFB

for about 6 seconds until the LED ﬂashes Blue. The

Z9i will stay in pairing mode for 2 minutes then will go into idle mode. To re-enter pairing mode, repeat this step. If you had

already paired 5 devices and want to pair again, you will need to RESET the Z9i to enter pairing mode.

4. Make a Call: Dial the number using your phone as normal. Audio will automatically transfer to the headset.

5. To Answer or End a call: Click the MFB

once when there is an incoming call.

Click the MFB

to end the call.

6. Reject*

a call: Press and Hold the MFB

for 1 second when there is an incoming call.

7. Redial*: the last call, Press and Hold the Volume Button for about 3 seconds. To cancel Redial, click the MFB

8. Activate Voice Dialing*: While connected to a phone, Press the MFB

once. Voice commands must have been

previously recorded into your phone (see your phones user guide for speciﬁc instructions).

9. Volume level: Click Volume or Volume during a call to adjust the desired level. Volume changes will be remembered

for the next call. Be sure to use the headset at a comfortable and safe volume level.

Andere Handbücher für Z9i

Inhaltsverzeichnis

Andere Blueant Headset Handbücher

Blueant

Blueant CT Bedienungsanleitung

Blueant

Blueant T1 Bedienungsanleitung

Blueant

Blueant T1 Bedienungsanleitung

Blueant

Blueant BLUEANT Z9 Installationsanleitung

Blueant

Blueant Z9i Kurzanleitung

Blueant

Blueant ENDURE Bedienungsanleitung

Blueant

Blueant SuperTooth II Bedienungsanleitung

Blueant

Blueant BLUEANT Z9 Bedienungsanleitung

Blueant

Blueant X3 MICRO Bedienungsanleitung

Blueant

Blueant SuperTooth II Bedienungsanleitung

Blueant

Blueant Interphone none Bedienungsanleitung

Blueant

Blueant SuperTooth II Bedienungsanleitung

Blueant

Blueant X5 Bedienungsanleitung

Blueant

Blueant V1 Bedienungsanleitung

Blueant

Blueant V1 Bedienungsanleitung

Blueant

Blueant X5 Bedienungsanleitung

Blueant

Blueant X3 MICRO Bedienungsanleitung

Blueant

Blueant V12 Installationsanleitung

Blueant

Blueant X3 MICRO Bedienungsanleitung

Blueant

Blueant Q3i Bedienungsanleitung

Blueant

Blueant Interphone none Installationsanleitung

Blueant

Blueant X3 MICRO Installationsanleitung

Blueant

Blueant X5i Bedienungsanleitung

Blueant

Blueant interphone F4 stereo Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung