Blueant V12 Installationsanleitung

V12 FAQ

V12 LCD Headset

General

1. What is the main difference between the V12 and other Bluetooth headsets?

2. What is included in the V12 package?

3. How does the V12 use Bluetooth technology?

4. How do I handle calls when the V12 is connected?

5. Can I transfer an active call back to my phone to continue it there?

6. How many devices can I pair to the V12?

7. Is my phone compatible?

8. What is the passcode/passkey of the V12?

9. Can I change the passcode of the V12?

10. Can I use voice activated dialling?

11. Can I use the V12 to listen to music on my mobile?

12. How often should I charge my V12?

13. Can I use my V12 with my computer / laptop for VOIP applications?

14. Do I need to pair the devices every time I use them together?

Bluetooth

1. Is it safe to use Bluetooth devices? I have heard they can allow unauthorised

connections.

2. Can somebody else take control of my V12 if they are in range?

3. What is the difference between Handsfree and Headset Bluetooth Profiles?

4. How do I know if my devices are connected?

5. How far can my mobile be from the V12 and still remain connected?

6. Can other electrical devices cause interference with Bluetooth?

7. If I cup my hand over a Bluetooth device the signal strength and quality suffers.

Why does this happen?

8. What Bluetooth devices can I use with a Bluetooth headset?

Troubleshooting

1. Why won’t my V12 go into pairing mode?

2. Why can’t I hear any sound from the speaker?

3. Why does my V12 sound noisy and distorted?

4. My V12 worked great but now it won’t connect. What can I do?

5. Why can the talk time and standby time differ from the products specification?

6. Why does my phone’s battery not last as long as it used to?

7. I am having trouble pairing a second phone. What can I do?

8. How can I stay near the V12 without having calls diverted through it?

9. My phone says “Bluetooth Module not found”. What can I do?

10. I have a PDA phone that pairs to the V12 but has trouble transferring calls. How

can I fix this problem?

11. Why can’t I hear the dial tone from my headset when I dial?

12. Voice dialling is not successful every time. What can I do?

13. I have read all the solutions in this document but I still cannot get my V12 to

Work properly. What can I do?

General

1. What is the main difference between the V12 and other Bluetooth headsets?

The V12 has a backlit LCD screen which provides the user with q lot of information

about the status of the headset. Rather than relying on flashes of LED lights like other

headsets, the V12 tells the user exactly what it is doing, using defined status symbols

and words. The following information is displayed on the V12 screen - Caller ID, battery and

charge levels, volume level, vibrate status, Bluetooth connection status, redial and voice

dial status, the phone that is connected (up to 5 devices can be paired) and a history of

received calls.

2. What is included in the V12 package?

Included in the box is the V12 headset, an AC adapter, one small and one large removable

ear hook, a neck strap with a micro USB plug for easy use, a User guide and a 2 year

Warranty card.

3. How does the V12 use the Bluetooth technology?

Bluetooth is used to send and receive voice signals over radio waves between your

mobile phone and the V12. It allows the V12 to control phone calls on your mobile

phone remotely and to view incoming call numbers.

4. How do I handle calls when the V12 is connected?

For incoming calls firmly press the MFB button (Multi-Function Button) once to answer

the call. For outgoing calls firmly press the MFB(3) button once to activate voice

dialling or dial as per normal from your phone and the call will transfer to the V12.

For redialling the last number called, press the MFB(3) for 3 seconds, redial will be

displayed on screen and a second beep is heard. To terminate an active call press the

MFB(3) button once.

5. Can I transfer an active call back to my phone to continue it there?

Yes, simply switch the V12 OFF by Pressing and Holding the MFB for 3 seconds and

the call will continue on the phone. Alternatively, disconnect the V12 using your phones

Bluetooth Menu.

6. How many devices can I pair to the V12?

The V12 can store pairing information for 5 different Bluetooth phones/devices. It will

connect to the last used phone if it is on and in range. If you wish to connect another

paired phone select the V12 LCD in that phones Bluetooth menu.

Note: The V12 can only connect to one phone at a time

7. Is my phone compatible?

If your phone has Bluetooth, it more than likely supports a Handsfree or Headset

Bluetooth profile, so will work with the V12. Check your phones manual to see if it supports

Bluetooth Headset or Handsfree profile.

8. What is the passcode/passkey of the V12?

The Passcode for the V12 is “0000”.

9. Can I change the passcode of the V12?

No, the passkey is inbuilt and cannot be changed.

10. Can I use voice activated dialling?

Yes the V12 supports voice activated dialling if your phone also supports it. This feature

requires the phone to support the Handsfree profile which (generally) all newly released

phones do support. Headset profile is becoming outdated, thus fewer phones are released

only with Headset profile these days. Check your phones user manual for information on

setting this up.

11. Can I use the V12 to listen to music on my mobile?

Some phones can send music to the V12 using the Handsfree Profile but it will be a mono

signal and sound a bit like an AM radio. Good applications for this are audio books.

12. How often should I charge my V12?

You should only charge the V12 when the LCD Battery Indicator shows 20% or below.

The battery will last for about 300 hrs on standby and much longer if the V12 is switched off

in between uses.

13. Can I use my V12 with my computer for VOIP applications?

Yes, you can connect the V12 to a PC or Mac that supports the Bluetooth Headset or

Handsfree profile. To do this you need to have Bluetooth enabled in your computer by using

a Bluetooth USB Dongle or having a computer that has inbuilt Bluetooth.

Depending on the Bluetooth software installed, the connection process will be different.

Simply put the V12 into Pairing mode, then activate a search using your computer’s

Bluetooth Software. When the V12 is displayed, enter the Passkey “0000” then start the

Headset/Handsfree service by connecting the headset.

Note: Microsoft’s® Windows® XP generic Bluetooth driver does not support audio, but

your computer may be using a different driver that does support it

To check which Bluetooth driver you have, go to: Control Panel > Sounds, Speech and

Audio Devices > Sounds and Audio Devices.

Click on the hardware tab and find the “Bluetooth Audio” in the Devices. Left click on the

“Bluetooth Audio” to make it highlighted. Below you can see which manufacturers device

driver is linked to the “Bluetooth Audio”. Check your computer manufacturers’ website for

any software updates. Go to our website for more details on using the V12 for VOIP.

14. Do I need to pair the devices every time I use them together?

No, the pairing process is required only once for each phone, unless the devices are

deleted.

Bluetooth

1. Is it safe to use Bluetooth devices? I have heard they can allow unauthorised

connections.

For Bluetooth security reasons, after you have set up your Bluetooth devices we

recommend turning OFF the visibility option in the Bluetooth Menu of your phone so that

other Bluetooth users cannot see the your phone. This only applies to a few (mainly older)

Bluetooth enabled phones, as most new phones have better security.

2. Can somebody else take control of my V12 if they are in range?

No, the V12 can only connect to previously paired devices that have been authorised.

3. What is the difference between Handsfree and Headset Bluetooth Profiles?

Handsfree Profile allows for extra features to be used with a mobile phone. Some features

that Handsfree profile enables are voice dial, redial and call transfer. These particular

features are not available using Headset profile. Handsfree Profile also allows for a slightly

better call quality.

4. How do I know if my devices are connected?

When Bluetooth is turned ON in your phone you may see a Bluetooth symbol appear on

your main screen that changes slightly (colours invert or arrows appear) when connected to

the V12. Some phones show a Headset or Car symbol to notify you that the devices are

connected.

5. How far can my mobile be from the V12 and still remain connected?

The V12 will remain connected within a range of 10 metres (30 ft). Sound quality may start

to deteriorate after about 7 metres depending on your environment and if obstacles are

present.

6. Can other electrical devices cause interference with Bluetooth?

Bluetooth technology employs a technique called ‘frequency hopping’ to constantly change

the frequency at which it sends data, thus reducing interference with wireless devices like

wireless LAN’s, cordless landline phones. However, noise interference can occur if the

Bluetooth device is used in close proximity with a microwave. Check if there are any such

devices in the surroundings, and if so keep the distance between the V12 and such devices

to at least 5 - 10m. Usually, any interference will only cause a slight crackling sound. The

frequency of Bluetooth is much higher than that of radio station bands.

7. If I cup my hand over a Bluetooth device the signal strength and quality suffers.

Why does this happen?

Bluetooth signals are radio waves and so do not need line of sight to operate. But, radio

waves cannot travel through water and as the human body is made up of mostly water they

cannot travel through it. Therefore, your hand will create a barrier causing slight

interference and a loss of signal quality.

8. What Bluetooth devices can use a Bluetooth headset?

To use the V12 the device must support either headset or Handsfree Bluetooth Profiles.

Some devices may only support data transmissions and not audio.

Troubleshooting

1. Why won’t my V12 go into pairing mode?

Follow the instructions in the V12 Manual. To enter pairing mode Press and hold the MFB

from the off position, until ‘pairing’ is displayed on screen. If you have already paired 3

different phones to the V12, it will remove the 1st paired phone to enable you to pair the new

phone. The V12 sometimes requires a few seconds to establish a connection. Please be

patient while devices search and connect to each other.

2. Why can’t I hear any sound from the Speaker?

The phone’s memory may have become corrupt and can be fixed by rebooting (turning the

phone off and on again) the phone. If this does not work, delete pairing information and pair

again. Check the volume levels of both your phone and the headset.

3. Why does my V12 sound noisy and distorted?

A low battery can also cause bad voice quality. Please charge the headset if it indicates a

low level of charge. Some people like to have their phone ring loudly, but this may cause

distortion when transferred to the V12 speaker. In your phone, set up a profile with lower

ringing volumes and keypad tones and activate when using with V12. (See your phones

user manual for instructions on setting up profiles, some phones can switch profiles

automatically). Adjust your phones volume level and that of the headset. You may have low

antenna strength from your phone network which may cause signal drop outs or disruption.

4. My V12 worked great but now it won’t connect. What can I do?

As newer phones are like mini-computers, they may become corrupt over time and you may

need to reset them every so often (at least once a week is good). Simply switch off your

phone remove the battery for a few seconds, replace and reboot. The V12 should now

connect. If not, delete the existing pairing and re-pair the devices.

5. Why can the talk time and standby time differ with the products specification?

The talk time and stand by time will differ based on different brands’ of mobile phones,

different distances between devices and the Bluetooth link status you are using (active,

sleep, sniff mode etc.)

6. Why does my phone’s battery not last as long as it used to?

When you switch Bluetooth ON, your phone is ready to connect to paired Bluetooth

devices. This will use more battery power than without Bluetooth ON. The V12 has a

standby mode it enters when connected to your phone so that it minimizes battery use. This

allows the V12 to have outstanding battery life as well as reducing the power required by

the phone.

7. I am having trouble pairing a second phone. What can I do?

When Pairing a second mobile phone, make sure the first phone is off or out of range.

If you cannot connect to a previously paired and connected phone, go to the Bluetooth

menu in the phone, select the V12 and Press Connect. Some phones may require that you

do this if it is the second device used. You do not have to re-pair the devices, simply

manually connect. Some Nokia phones require that you disconnect from the first phone

using the phone’s Bluetooth menu before connecting with the second.

8. How can I stay near the V12 but not have calls diverted through it?

The V12 will remain connected within a range of 10 metres so if you are staying near the

device but want to take calls through the phone simply switch the V12 off by long pressing

the MFB button.

9. My phone says “Bluetooth Module not found”. What can I do?

This means that your phone cannot find its internal Bluetooth chip for some reason.

Restarting your phone should fix this problem. If not please contact your mobile phone

manufacturer.

10. I have a PDA phone that pairs to the V12 but has trouble transferring calls. How

can I fix this problem?

Andere Handbücher für V12

Andere Blueant Headset Handbücher

Blueant

Blueant SuperTooth II Bedienungsanleitung

Blueant

Blueant V12 Bedienungsanleitung

Blueant

Blueant interphone F4 stereo Bedienungsanleitung

Blueant

Blueant SuperTooth II Bedienungsanleitung

Blueant

Blueant T1 Bedienungsanleitung

Blueant

Blueant V1 Bedienungsanleitung

Blueant

Blueant V1 Bedienungsanleitung

Blueant

Blueant Q2 Bedienungsanleitung

Blueant

Blueant X3 MICRO Bedienungsanleitung

Blueant

Blueant T8 micro Bedienungsanleitung

Blueant

Blueant ENDURE Bedienungsanleitung

Blueant

Blueant BLUEANT Z9 Bedienungsanleitung

Blueant

Blueant Interphone none Installationsanleitung

Blueant

Blueant interphone F4 stereo Bedienungsanleitung

Blueant

Blueant X3 MICRO Bedienungsanleitung

Blueant

Blueant ENDURE Bedienungsanleitung

Blueant

Blueant X3 MICRO Installationsanleitung

Blueant

Blueant BLUEANT Z9 Installationsanleitung

Blueant

Blueant Q1 Bedienungsanleitung

Blueant

Blueant T2 ENDURE Bedienungsanleitung

Blueant

Blueant SuperTooth II Bedienungsanleitung

Blueant

Blueant Z9i Bedienungsanleitung

Blueant

Blueant Q2 Bedienungsanleitung

Blueant

Blueant X5i Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung