Bluebird SG1314B Bedienungsanleitung

Operator’s Manual

Model:

SG1314B

MANUAL NO. 109277 REV. 07 (12/15/18)

OFF

SG1314B / 966042801

SG 1314GT

TABLE OF CONTENTS

Stump Grinder SG1314B

Introduction ................................................ 4

Congratulations ..................................... 4

Use ........................................................ 4

Insure your machine .............................. 4

Good service ......................................... 4

Serial number ........................................ 4

Symbols and decals ................................... 5

Location of decals.................................. 6

Translation of instructions...................... 6

Safety instructions..................................... 7

General use ........................................... 7

Controls ................................................. 9

Operation............................................... 10

Movement/Transport.............................. 11

Storage .................................................. 11

Children ................................................. 11

Fuel System .......................................... 12

Maintenance .......................................... 13

Protective Equipment ............................... 14

Personal Equipment .............................. 14

Set-Up ......................................................... 15

Equipment set-up .................................. 15

Controls ...................................................... 18

Presentation .......................................... 18

Main Components and

Operating Instructions ........................... 18

Engine ................................................... 19

CuttingUnit ............................................ 22

Operation.................................................... 24

Starting the Engine................................. 24

Normal Shutdown .................................. 26

Shutdown in Emergency Situations....... 26

Before You Start..................................... 27

Using Your Stump Grinder ..................... 28

Operating on Hills .................................. 30

Transport ............................................... 30

Maintenance............................................... 31

MaintenanceSchedule ........................... 31

Cleaning the Cyclone Filter .................... 32

Replacing theAir Filter............................ 33

Cleaning the Sludge Reservoir............... 34

IdleAdjustment ....................................... 34

Ignition System....................................... 35

Adjusting the Drive Belt .......................... 36

Removing & Refitting the Wheels .......... 38

Adjusting theBrake................................. 38

Two Minute Rule ..................................... 39

Cleaning & Washing............................... 39

Lubrication ................................................. 40

Lubrication Schedule.............................. 40

Lubricating the Cables............................ 42

Troubleshooting ........................................ 43

Storage ....................................................... 45

Winter Storage ....................................... 45

Service ................................................... 45

Technical Data............................................ 46

Wiring Diagram ........................................... 47

Service Journal....................................... 48

Delivery Service ..................................... 48

After the First 20 Hours .......................... 48

INTRODUCTION

Congratulations

Thank you for purchasing a BlueBird stump grinder. Through your confidence in us, you have cho-

sen an exceptionally high quality product.

This manual is a valuable document. It describes your new BlueBird machine. Read the manual

carefully before attempting to use the machine. Following the instructions (use, service, mainte-

nance, etc.) can considerably increase the life-span of your machine and even increase its resale

value. Please contact your dealer for more information.

If you sell your BlueBird machine, make sure to give the operator’s manual to the new owner.

Use

The stump grinder is used to remove tree stumps. By moving the blade in sweeping movements

laterally over the top and front of the stump, you can gradually grind it away. Read the chapter

“Safety instructions” before you use the machine for the first time.

Insure your machine

Contact your insurance company to check on insurance coverage for your new machine. You

should have all-inclusive insurance for liability, fire, damage and theft.

Good service

BlueBird’s products are sold all over the world and only in specialized retail trade with complete

service. This ensures that you as a customer receive only the best support and service. Before the

machine was delivered it underwent inspection and was adjusted by your dealer. When you need

spare parts or support in service questions, guarantee issues, etc., please consult the following

professional:

This Operator’s Manual belongs to machine with

serial number: Engine number:

Serial number

The serial number can be found on the printed plate attached to the frame in front of engine. The

plate includes the following information:

•The machine’s type designation (MODEL).

•The machine’s serial number (S/N).

Please state the type designation and serial number when ordering spare parts.

The engine’s serial number is punched in the crankcase under the oil level guard.

The engine type is specified on the crankcase to the right of the oil level guard but also appears on

the decal on the starter.

Please state these when ordering spare engine parts.

SYMBOLS AND DECALS

WARNING!

Xxxx xxx xxxx xx xxxx x xxxx.

Usedinthis publication tonotifythe readerofa risk

of personal injury, particularly if the reader DOES

NOT follow the instructions given in the manual.

IMPORTANTINFORMATION

Xxxx xxx xxxx xx xxxx x xxxx.

Usedinthis publication tonotifythe readerofa risk

ofmaterial damage,particularlyif thereader DOES

NOT follow the instructions given in the manual.

Used also when there is a potential for misuse or

misassembly.

Decals and machine-bound instructions

1. BlueBirdlogo

2. BlueBirdlogo

3. General precautions

4. Exhaust warnings

5. Use ear and eye protection

Decalsthat aremissing orillegible shallbe aquired/

replaced before using the machine.

6. DANGER risk for injury from cutter blade

7. Modeldesignation SG1314A

8. Engine switch on the handle

9. Throttle

10. Handle adjustment

11. No step

SYMBOLS AND DECALS

Location of decals

Translation of instructions

Decal 3

Important information

Read and make sure you understand the

Operator’s Manual before use or maintenance.

To obtain a replacement manual, please contact

yourdealer.

Observeallsafety instructions;otherwiseyou may

injure yourself or others around you.

Make sure that the machine is in serviceable con-

dition prior to use.

Stop the engine and wait until all machine move-

ment comes to a standstill before service, adjust-

ment or cleaning.

Do not run the engine in poorly ventilated spaces.

Make sure nobody is in the vicinity of the machine

before starting and during use.

Avoid slopes that are too steep to use the ma-

chine safely.

Clear any debris prior to use.

Decal 4

Warning

Engine exhaust, some of its constituents and cer-

tainvehiclecomponents containoremit chemicals

considered by the Sate of California to cause can-

cer, birth defects or other reproductive harm. The

engine emits carbon monoxide, which is a color-

less, poisonous gas. DO NOT use the machine in

enclosed spaces.

Decal 8

O = off, I = on

Decal 9

Rabbit = Fast engage clutch.

Turtle = Slow disengage clutch.

Decal 10

Handleadjustment.

Decal 5

Wear goggles or safety glasses and ear protec-

tions when using the unit.

Decal 6

There is DANGER to your feet from the cutting

blades.

Decal 11

No step.

SAFETY INSTRUCTIONS

WARNING!

Underno circumstancesmay theoriginal

design of the machine be modified

without written approval from the

manufacturer. Such modifications not

only affect the performance and

durability of the machine but may even

pose a safety risk for users and those in

the vicinity. Unauthorized modifications

to the design of the machine may

absolve the manufacturer from liability

for any resulting personal injury or

propertydamage. Modifyingthe machine

without written approval from the

manufacturer may void the guarantee.

General use

The object of this manual is to help you use your

BlueBirdmachinesafelyand togiveyou information

about how to maintain your machine. Please read

the manual carefully before attempting to use the

machine.

If after reading the operator’s manual you are still

unsure about the safety risks associated with use

of the machine, you should not use the machine.

Please contact your dealer for more information.

These safety instructions only address the basics

for safe use. It would be impossible in the safety

instructions to describe all possible risk situations

that could arise when using the machine. You can,

however, prevent accidents by always using

common sense.

To obtain extra copies of the operator’s manual,

please contact your dealer.

• Readthismanual carefullyandmake sureyou

understand it before using the machine or

performingany maintenance.Iftheusercannot

read this manual, it is the responsibility of the

machine owner to explain the contents to the

user.

IMPORTANT INFORMATION

Do not use the machine until you have

read the operator’s manual carefully and

understand the instructions given. All

maintenance work or adjustments not

described in this manual must be

performed by an authorized BlueBird

service workshop.

WARNING!

The stump grinder can be dangerous if

used improperly or with out due care and

can lead to serious accidents, in the

worst cases even fatal accidents. It is

very important that you read this

operator’s manual and understand the

instructions before you attempt to use

the machine.

8011-208chg

Read this manual carefully before starting the machine.

• BlueBirdoriginalspare parts aredesignedand

specifiedtomaintain highqualityand correctfit

for optimal durability and life-span. From a

safety point of view, you should only use

BlueBird original spare parts.

•Learn how to use the machine and its controls

safelyandlearn torecognize thesafetydecals.

•Onlyusethemachinefor removingtreestumps.

It is not intended for any other use.

• Check that the machine is in serviceable

condition prior to use; see the chapter

”Maintenance/Maintenanceschedule”.

• Onlyusethemachine indaylightor inotherwell-

litconditions. Keepthe machineasafedistance

from holes or other irregularities in the ground.

Pay attention to other possible risks.

• Only allow the machine to be used by adults

who are familiar with its use.

• Follow all safety instructions. Failure to do so

may result in injury to yourself or others.

• Accidentprevention regulations,othergeneral

safety regulations, occupational safety rules

andtrafficregulationsmustbefollowedwithout

fail.

• Allusersshallbetrainedinuseof themachine.

The owner is responsible for training users.

• Engage an authorized BlueBird workshop for

all service and repairs not described in this

manual.

• Never allow children or persons not trained in

the use of the machine to use or service it.

Local laws may regulate the age of the user.

• People and animals can distract you causing

you to lose control of the machine. For this

reason, you should always concentrate and

focus on the task at hand.

• Neverleave themachine unsupervisedwith the

enginerunning.

• Make sure that other people are nearby when

you are using the machine so that you can call

for help should an emergency arise.

• The machine is tested and approved only with

the equipment originally provided or

recommended by the manufacturer.

Overexposure to vibration may lead to

circulatory or nerve damage, particularly

in people who have impaired circulation.

Contact your doctor if you experience

symptoms that could have been caused

by overexposure to vibration. Examples

ofcommonsymptomsincludenumbness,

pain, muscle weakness, change of skin

color or an uncomfortable feeling of

tingling. These symptoms appear most

frequently in the fingers, hands or wrists.

WARNING!

The engine can become very hot. To

avoid being burned, you must turn off the

engine and wait until all parts have

cooled before touching the engine.

WARNING!

IMPORTANT INFORMATION

Never use a stump grinder that is

damaged or incorrectly adjusted. Never

use the stump grinder if any component

is missing or if it is not properly

assembled. Check that the cutting tools

stop rotating when you reduce the throttle.

If you find yourself in a situation where you

are not sure what to do, always seek

expert assistance. DO NOT try to attack

any problem you are not qualified to

resolve.

SAFETY INSTRUCTIONS

• Make sure nobody else is in the vicinity of the

machinewhen youstart theengine, engagethe

drive or run the machine.

• Makesureanimals andpeoplemaintain a safe

distance from the machine.

• Clear the area of objects such as stones, toys,

steel wire, etc. that could become caught in

moving machine parts and thrown out.

• Find and locate all fixed objects in the ground,

suchassprinkler systems,poles, watervalves,

bases for washing lines, etc. Be certain to

check for hidden electrical cables or similar in

thesurface ofthe lawn.Alwaysrunthemachine

around these objects. Never intentionally run

the machine over foreign objects.

• Check that the dead man’s grip and all guards

are fitted and functioning. DO NOT use the

machine if it is not working properly.

• Makessure noclothing, longhair orjewelry can

catch in moving machine parts.

•Check that all safety decals are in place. See

the chapter “Location of decals”.

•Use mouth protection, protective gloves with

goodgrip andprotective clothingwhich youcan

move unrestricted. Also use leg protection to

protect your legs from sparks and the cutting

tools.

• Neverusethe machine whenbarefoot.Always

wear protective shoes or protective boots with

anti-slip and preferably with steel toes.

• Use a helmet with a full face visor or a mesh

visor and protective glasses. Wear approved

ear-protection when running the machine.Ask

yourdealeraboutapprovedprotective glasses,

ear protection and recommended helmets.

Preparations

• Make sure that you always have first aid

equipment at hand when using the machine.

Always use approved protective clothing

and approved protective equipment when

using the machine. Protective clothing and

protective equipment cannot eliminate

the risk of accidents, but wearing proper

clothing and the correct equipment will

reduce the degree of injury should an

accident occur. Ask your dealer about

approved protective clothing and

approved protective equipment

recommended by BlueBird.

WARNING!

8011-198

Clear the work area before beginning work.

8011-189

Use appropriate equipment.

SAFETY INSTRUCTIONS

Operating

•DO NOT use the machine on grades of more

than 10°.

•DO NOT use the machine if you are tired, if

youhave consumedalcohol, orif youaretaking

other drugs or medication that can affect your

vision, judgment or coordination.

• Never use the machine indoors or in spaces

lackingproperventilation.

• Make sure you have a proper foothold when

using the machine, particularly when backing.

Walk, don’trun. Neverworkon wetgrass.Poor

traction may cause you to slip.

• Keep your hands and feet away from moving

parts.

• Keep your hands and feet away from the work

tools.

•DO NOT use your feet or other parts of your

body to gain greater bearing pressure against

the stump.

• Smoking, open flames or sparks in the vicinity

ofthe machineare strictly forbidden.Gasoline

is extremely flammable and carelessness in

handling can result in personal injury or fire.

•Never use a machine with a defective muffler.

•In very warm and dry climates, stump grinder

operation poses a risk of forest fires.

• Stop and inspect the equipment if you run over

or into anything. If necessary, make repairs

beforebeginningagain.

• Whateverhappens, youshould alwayspark the

machineoneven ground, disengage thedrive,

activate the parking, turn off the engine and

wait until all moving parts have stopped before

leaving the operating position behind the

machine.

8011-209chg

The engine exhaust is poisonous. Never run the engine indoors.

8011-091

Make sure you keep your hands and feet away from moving

parts.

8011-291chg

Smoking near the machine is strictly prohibited.

Engine exhaust, some of its constituents and certain vehicle components contain or emit

chemicals considered to cause cancer, birth defects or other reproductive harm. The

engine emits carbon monoxide, which is a colorless, poisonous gas. Do not use the

machine in enclosed spaces.

WARNING!

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bluebird Schleifer Handbücher

Bluebird

Bluebird SG1314A Bedienungsanleitung

Beliebte Schleifer Handbücher anderer Marken

Parkside

Parkside PWS 230 C3 Bedienungsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE ASC 9 Technisches Handbuch

PTA

PTA P1322 Bedienungsanleitung

Crown

Crown CT13313 Bedienungsanleitung

Parkside

Parkside 280250 Bedienungsanleitung

Climax

Climax VM2150 Series Bedienungsanleitung

Jet

Jet JPSG-618M1 Service-Handbuch

Makita

Makita GA4030 Bedienungsanleitung

DeWalt

DeWalt DWEN202 Bedienungsanleitung

Grizzly

Grizzly G2790 Bedienungsanleitung

Fein

Fein MSf843-1a Bedienungsanleitung

Bosch

Bosch GWS 14,4 V PROFESSIONAL Bedienungsanleitung

RAMSET

RAMSET CBAGR18 Bedienungsanleitung

Bosch

Bosch 8-115 Z Bedienungsanleitung

STEELE PRODUCTS

STEELE PRODUCTS SP-PB008 Bedienungsanleitung

MW TOOLS

MW TOOLS ME15W Bedienungsanleitung

Caravaggi

Caravaggi SP 20 Betriebsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE UWK 10-R125 Technisches Handbuch