BlueTrek Bizz Bedienungsanleitung

EC - Declaration of Conformity

We, ModeLabs Technologies Ltd of

31/F China Online Centre,

333 Lockhart Road,

Wan Chai, Hong Kong

declare under our sole responsibility that our product

BLUETREK Bizz

to which this declaration refers is in conformity with the appropriate standards

EN300 328-02

EN301 489-17

EN301 489-01

EN50371

EN60950

Following the provisions of Radio and Telecommunications Terminal Equipment directive

1999/5/EC.

January 2008

Michael Hsu, General Manager

FCC/ Industry Canada Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference. (2) This device must accept

any interference received, including interference that may cause undesired operation.

In compliance with Industry Canada regulations, technical specifications have been

provided in a declaration of conformity.This does not imply that Industry Canada approved

the equipment.

Caution: Changes or modifications to this Bluetooth® headset not expressly approved by

the party responsible for compliance could void the user’s authority to operate it.

Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer

under license.

Before using your headset for the first time

-You must charge it continuously for about 4 hours, until the red indicator light turns off.

Please refer to the “Charging the BLUETREK Bizz®” section of this manual.

-Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK Bizz®”

section of this manual.

Introduction

The BLUETREK Bizz® headset is a wireless headset based on the Bluetooth® technology. It

complies with Bluetooth® 2.0 protocol, supporting Headset and Hands-free profile.

The BLUETREK Bizz® headset has 1 button:

·“TALK”button (main button)

1 I BLUETREK Bizz

English

Indicator light (For headset status)

TALK button

Microphone

MicroSD Card socket

Indicator light (For

microSD card status)

Charging socket /

USB Connector

Charging the BLUETREK Bizz®

BLUETREK Bizz I 2

English

To charge your headset, please remove the speaker cover from the main body, then

connect the USB connector to a USB slot.

During the charge, the indicator light for headset status is red. The indicator light will turn

off when the charge is completed.

If a microSD card is inserted in the mircoSD card slot, the yellow indicator is switched on.

During subsequent charges, the charging should take approximately 2 hours.

When you hear a low-tone beep in your headset at regular intervals, and the indicator

light flashes in red, your headset needs to be recharged.

Remove the

speaker cover

Connect to the USB

port.

Because of the width of the connector, you may

not be able to connect it to certain USB ports on

your computer. If that's the case, you can use the

provided USB cable to make the connection.

Important:

• If your headset is fully charged, the red indicator light will not turn on when plugging

into the charger.

• To maximize battery lifetime, it is recommended to recharge your headset to full

apacity only when the battery is low, since a battery has a lifetime of about 500

charging cycles.

• If you leave your headset battery empty for an extended period of time, it could

excessively discharge the battery. In this case, charge your headset for 2 hours or more

until the battery recovers and recharges completely.When you first charge the headset

after prolonged storage, it may take few minutes for the red indicator light to turn on.

• Do not charge your headset for more than 10 hours.

• The use of any other charger will automatically suspend the warranty. It is strictly

forbidden and can be very dangerous.

3 I BLUETREK Bizz

English

Pairing the BLUETREK Bizz®

Switch on your phone and select its

Bluetooth® discover mode (refer to the

Bluetooth® mobile phone user manual).

When the BLUETREK Bizz® is switched

off, press and hold the TALK button for

about 7 seconds until the indicator light

flashes red and blue alternately. And a

sound can be heard in the speaker.

BLUETREK Bizz I 4

English

Before using the BLUETREK Bizz® headset, you must pair it with your Bluetooth® mobile

phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can

communicate.

Place the BLUETREK Bizz® and your mobile

phone within 0.3 meter (1 foot) from each other.

BLUETREK Bizz

“0000”

BLUETREK Bizz

Connect

Assign short name

Set as unauthorised

Delete

Select Cancel

If pairing was successful, the indicator light will switch to blue and flashes slowly.

If you haven’t started the discovery mode within 5 minutes, the headset will go to the

standby mode. You must then switch off your headset and start the pairing again.

English

Once the mobile phone detects the headset, a “BLUETREK Bizz”message

will be displayed. Follow the phone instructions to accept the pairing.The PIN

code (or passkey) is 0000, then press “yes” or“ok”.

For some phones, you

may need to select

“Connect”

5 I BLUETREK Bizz

Fitting lanyard

English

Wearing the BLUETREK Bizz®

Two different sizes of ear hooks are included in the pack to suit your ear size.

BLUETREK Bizz I 6

Switching the BLUETREK Bizz® ON and OFF

Switching BLUETREK Bizz® ON

When your headset is off, press and hold the TALK button for about 3 seconds until the

blue indicator light is on. A beep (2 tones) can be heard in the speaker. Release the

TALK button.

Switching BLUETREK Bizz® OFF

When your headset is on, press and hold the TALK button for about 7 seconds until the red

indicator light is on. A beep (2 tones) can be heard in the speaker then release the TALK

button.

Making a call

Mobile phone with voice recognition

. Make sure the voice recognition function on your mobile is activated and your voice tags

have been recorded with the phone.To enter these, please refer to your phone’s manual.

.When there is no incoming or active call, press once on the TALK button

.Wait for the audio signal sent by the mobile phone (generally a short tone).

. Speak the name of person you wish to call.

English

7 I BLUETREK Bizz

Mobile without voice recognition

. Make sure both the headset and the mobile phone are ON and in stand-by mode.

. Dial the number on the phone keypad, after approximately 2 seconds the audio

connection will be established.

This function may not be available on some phones, please refer to the trouble shooting

frequent asked questions in our website: www.bluetrek.com. to find out more.

Answering a call

When the headset rings, press once on the TALK button to take the call.

Ending a call

Press once on the TALK button to end an active call.

Adjusting the volume

English

BLUETREK Bizz I 8

Adjust the volume from your mobile phone during an active call.

Andere Handbücher für Bizz

Inhaltsverzeichnis

Andere BlueTrek Headset Handbücher

BlueTrek

BlueTrek S21 Bedienungsanleitung

BlueTrek

BlueTrek X3 Bedienungsanleitung

BlueTrek

BlueTrek S21 Bedienungsanleitung

BlueTrek

BlueTrek Tattoo Bedienungsanleitung

BlueTrek

BlueTrek Sugar-Clip Bedienungsanleitung

BlueTrek

BlueTrek Metal Bedienungsanleitung

BlueTrek

BlueTrek ORANGE Y2-2 Bedienungsanleitung

BlueTrek

BlueTrek G2 Bedienungsanleitung

BlueTrek

BlueTrek Mini Bedienungsanleitung

BlueTrek

BlueTrek UFO Bedienungsanleitung

BlueTrek

BlueTrek METAL EVOLUTION Bedienungsanleitung

BlueTrek

BlueTrek Skin Bedienungsanleitung

BlueTrek

BlueTrek E2 Bedienungsanleitung

BlueTrek

BlueTrek G2 Bedienungsanleitung

BlueTrek

BlueTrek Sense Bedienungsanleitung

BlueTrek

BlueTrek X3 Bedienungsanleitung

BlueTrek

BlueTrek Sense Referenzhandbuch

BlueTrek

BlueTrek Mini-Clip Bedienungsanleitung

BlueTrek

BlueTrek Mini Bedienungsanleitung

BlueTrek

BlueTrek M2 Bedienungsanleitung

BlueTrek

BlueTrek MUSICALL Bedienungsanleitung

BlueTrek

BlueTrek E2 Bedienungsanleitung

BlueTrek

BlueTrek Carbon Smart Bedienungsanleitung

BlueTrek

BlueTrek METAL EVOLUTION Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung