BLUM AVENTOS HF Bedienungsanleitung

AVENTOS HF

Telescopic arm set

▀ Telescopic arm (qty 2)

Cabinet heights Part no.

479 (18-7/8") — 558 (22") 20F3200.01

558 (22") — 686 (27") 20F3500.01

686 (27") — 889 (35") 20F3800.01

889 (35") — 1067 (42") 20F3900.01

Cover set

▀ Right and left cover plate

▀ Non-handed cover cap (qty 2) Part no.

Cover set 20F8000.NA

Lift mechanism set

▀ Lift mechanism (qty 2)

▀ #7 x 35 mm (1-3/8”) wood screw (qty 8)

Power factor Part no.

85 — 230 (1 lift mechanism req.) 20F2200.N5

231 — 470 20F2200.N5

471 — 880 20F2500.N5

780 — 1440 20F2800.N5

1401 — 2300 (3 lift mechanisms req.) 20F2800.N5

Wood or wide alum door hardware set

▀ CLIP top 120° hinge (qty 2)

▀ COMPACT 33° hinge (qty 2)

▀ CLIP top bottom door hinge (qty 2)

▀ COMPACT mounting plate (qty 2)

▀ Face frame adapter (qty 4)

▀ Telescopic arm mounting plate (qty 2)

NOTE: Three hinges and mounting plates required

for cabinet widths over 1219 (48")

Hardware set 78Z5530TA8

Inst. screw for wood doors 606N or 606P

Inst. screw for wide alum doors 7072A

Mounting plate with bracket set

▀ Left and right mounting plate with bracket

▀ For large overlay ﬁve-piece doors

Part no.

Mounting plate w/ bracket set 175H3F00

Wood/wide aluminum

frame door application

Part no.

1Locating pin locations

Panel

TR = Top reveal

TDH = Top door height

Top door height

(TDH) Y

231 to 271 TDH x .6 - 28 + TR

272 to 531 TDH x .6 - 57 + TR

Face frame

Top door height

(TDH) Y

231 to 271 TDH x .6 - 28 + TR

272 to 531 TDH x .6 - 57 + TR

TR = Top reveal

TDH = Top door height

192

TDH

Ø5

NOTE: Face frame

cabinets must be blocked

out ﬂush with the frame

Assembly

Universal individual template is available for pre-boring locating pins

Part no.

65.1051.02

WARNING

Risk of injury from spring-loaded arm

▀ Do not push arm assembly down or leave in the down position

▀ Remove mechanism before installing or removing cabinet

192

Top door height

Ø5

Align the lift mechanism in the cabinet using the 5 mm locator pins and attach the mechanism with the four

wood screws provided.

2Attaching the lift mechanism

#7 x 35 mm (1-3/8") wood screws (qty 4)

3Attach the telescopic arms

WARNING: Risk of injury from spring loaded arm.

Attach telescopic arms by clipping them on in

the fully upright position.

min 5

4Small overlay top door hinge planning CLIP top hinges

5Large overlay top door hinge planning COMPACT hinges

overlay

12.7

overlay

1/2"

Part no.

CLIP top hinge 70T5580.TL

Mounting plate 175H6000

Part no.

COMPACT hinge

32.4630

Mounting plate 130.1130.02

Overlay table

14 15 16 17

33456

B Bore distance

* Bore at 3 then adjust 1

Overlay table

1-1/4”

Bore distance

Assembly

reveal

12.7

Reveal table

6 5 4 3

3 4 5 6

B Bore distance

Part no.

CLIP top hinge 78Z5530T

Mounting plate 175H6000

6Bottom door hinge planning

NOTE: For ﬁve-piece door mounting

speciﬁcations, see page 6

Attaching the telescopic arm mounting plates

12.5+Overlay

XTDH

min.

Top door

height (TDH) X

231 to 271 TDH x .5 + 70

272 to 531 TDH x .5 + 47

Part no.

175H3100

Telescopic arm mounting plate

less than 6

12.5

Standard mounting plate works

Attaching the telescopic arm mounting plate with bracket for ﬁve-piece doors

more than 6

12.5

Standard mounting plate does not work

Use mounting plate with bracket when

panel is < 6 mm from screw

Part no.

175H3F00

Telescopic arm mounting plate with bracket

Assembly

8Attach the top door to the cabinet

9Attach the bottom door

Attach bottom door to the top door and attach the telescopic arms 1

a b

11 Finalizing the door adjustments

1. Adjust each top door hinge and mounting plate

to properly align the top door to the cabinet.

2. Adjust each bottom door hinge and mounting

plate to properly align doors to the cabinet and

to the top door.

± 2 mm± 2.5 mm ± 2 mm± 2 mm± 3 mm + 3/- 2 mm

1 2

Adjust tension of the mechanism

Close and ﬂush doors to cabinet. Open and close door to test closing force. Use a screw gun and the #2x2 POZI

driver bit to adjust the lift mechanism to the desired tension. Test door again and repeat until

desired function is achieved.

Tension adjustment should be the same on both lift mechanisms.

Although not illustrated here, telescopic arm mounting plates can also be adjusted horizontally ± 2 mm if ne e ded.

Assembly

13 Attach covers

Attach the left and right cover plates to each lift mechanism then attach the symmetrical cover caps

Adjust and lock telescopic arms

1. Close and ﬂush doors to cabinet. While pressing on

the top door, pull the bottom door open one inch.

2. Slightly open door and lock the telescopic arms

into position using the levers as shown.

Open door

enough to

lock levers

Detaching the telescopic arms

Remove covers

WARNING

Release both arms and gently rest the top

door on the loose arms. The tension will hold

the doors up for the next step.

Warning: Risk of injury

from spring-loaded

telescopic arm!

Maintain control of telescopic arm while

releasing the CLIP mechanism.

Removal

Risk of injury from spring-loaded arm

▀ Do not push arm assembly down or leave in the down position

▀ Remove mechanism before installing or removing cabinet

Andere Handbücher für AVENTOS HF

Inhaltsverzeichnis

Andere BLUM Inneneinrichtung Handbücher

BLUM

BLUM SERVO-DRIVE Bedienungsanleitung

BLUM

BLUM 769R5337SB Bedienungsanleitung

BLUM

BLUM METABOX 320N Leitfaden

BLUM

BLUM Tandem Bedienungsanleitung

BLUM

BLUM METABOX 320K Bedienungsanleitung

BLUM

BLUM AVENTOS HK Bedienungsanleitung

BLUM

BLUM AVENTOS HK Bedienungsanleitung

BLUM

BLUM Aventos HK-S Bedienungsanleitung

BLUM

BLUM COMPACT BLUMOTION 38C Series Bedienungsanleitung

BLUM

BLUM TANDEM plus BLUMOTION 563F Bedienungsanleitung

BLUM

BLUM M35.7200 Series Bedienungsanleitung

BLUM

BLUM Compact Blumotion Bedienungsanleitung

BLUM

BLUM TANDEM plus BLUMOTION 569H Bedienungsanleitung

BLUM

BLUM Tandem Bedienungsanleitung

BLUM

BLUM METABOX Bedienungsanleitung

BLUM

BLUM SERVO-DRIVE flex Bedienungsanleitung

BLUM

BLUM BLUMOTION AVENTOS HS Bedienungsanleitung

BLUM

BLUM Wellborn WDVC3030 Bedienungsanleitung

BLUM

BLUM CLIP top 110 Bedienungsanleitung

BLUM

BLUM TANDEMBOX Installationsanleitung

BLUM

BLUM AVENTOS HF Bedienungsanleitung

BLUM

BLUM Movento 769R5337MB Bedienungsanleitung

BLUM

BLUM AVENTOS HL Bedienungsanleitung

BLUM

BLUM 70T3553 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung