Boca SL 65 Bedienungsanleitung

Overview of equipment

Front side of the receiver

Rear side of the receiver

Remote control

Overview of equipment

Front side of the receiver

1LED display Shows channel location

2–Infrared sensor for the signal of the remote control

3LED POWER LED is illuminated if the receiver is switched on or in

standby mode

4OK Confirm

5MENU Invokes main menu

6VOL+ Increases volume

7VOL– Decreases volume

8CH+ Switches to the next higher channel location

9CH– Switches to the next lower channel location

10 POWER Switches on and switches to the standby mode

Rear side of the receiver

1AUDIO R Right analogue audio connection

2AUDIO L Left analogue audio connection

3VIDEO Analogue video connection

4VCR SCART connection for the video set

5TV SCART connection for the TV set

6RS 232 Serial port

7OPTICAL Digital optical audio output

8COAXIAL Digital coaxial audio output

9S-VHS S-Video connection

10 100–240 V~

50/60 Hz, 30 W

Mains socket

11 ON/OFF Mains switch

12 ANT-OUT Coaxial connection for a second satellite receiver

13 ANT-IN Coaxial connection for the antenna cable

Remote control

1POWER Switches on and switches to the standby mode

2F3 (yellow key) The corresponding function is displayed on the

screen

3F4 (blue key) The corresponding function is displayed on the

screen

4TV/=Switches between TV and radio mode

5A/B Selects the audio track

6P+ /P– Changes to the next higher or lower channel /

selects menu item

7MUTE Turns off sound

8RECALL Switches to previously selected channel

90–9 Selects channel directly, numerical input

10 -- / -- Two-digit channel location input

11 INFO Displays reception data of the current channel

12 EPG Electronic program guide

13 V–/V+ Decreases or increases volume / selects setting

14 OK Confirms menu or menu item

15 MENU Invokes main menu

16 EXIT Exits menu or menu item

17 F1 (red key) The corresponding function is displayed on the

screen

18 F2 (green key) The corresponding function is displayed on the

screen

DVB-T Receiver SL 65

Operating manual

Version 1.4, as of 10.08.2005

Preface

This operating manual will help you in the

•appropriate,

•safe and

•favourable

usage of the digital terrestrial satellite receiver, in short, the

“receiver”.

We assume that the user of the receiver has overall knowledge

regarding the handling of audio and video equipment.

Each person who

•installs,

•connects,

•operates,

•cleans or

•disposes of

this receiver must be familiar with the entire content of this operating

manual. Always keep this operating manual in the proximity of the

receiver.

This device is labelled with the CE mark and with the GS mark of the

TÜV Rheinland (Technical Supervisory Association).

Style features

Specific style features have been given in different sections of the

operating manual. Thus, you can easily differentiate whether it

concerns

normal text,

•enumerations or

actions.

Contents

Overview of equipment ....................................................................... 2

Remote control ................................................................................... 3

Preface ............................................................................................... 5

Style features .................................................................................... 5

Contents ............................................................................................ 6

Safety instructions ........................................................................... 8

Basic safety instructions .....................................................................8

Explanation of safety instructions ..................................................... 10

Appropriate usage ............................................................................ 11

Scope of supply .............................................................................. 12

Description ...................................................................................... 13

Connecting the receiver................................................................. 15

Connecting the receiver to the antenna............................................15

Connection with the SCART cable ...................................................16

Connection with the YUV cable ........................................................ 18

Connection with the S-Video Cable (S-VHS) ................................... 20

Connection with the Cinch cable ...................................................... 22

Connection of an Audio-Digital Receiver.......................................... 24

Connecting the receiver to the mains supply....................................27

Getting started ................................................................................ 28

Switching on and off ......................................................................... 28

Remote control ................................................................................. 28

Initial installation with the installation assistant ................................ 30

Operation ......................................................................................... 31

Basic steps ....................................................................................... 31

Additional functions...........................................................................32

Screen-inlays while switching a channel ..........................................34

Invoking menus................................................................................. 34

Menu structure.................................................................................. 35

Navigating in menus and sub-menus ............................................... 35

Entering basic settings .................................................................. 37

Setting the language of the user interface (OSD) ............................37

Scanning to add new channels.........................................................38

Settings............................................................................................. 41

Timer / Sleep timer ........................................................................... 47

Changing the programme order .......................................................50

Uninstalling the receiver ................................................................ 51

Cleaning........................................................................................... 51

Troubleshooting ............................................................................. 52

Technical specifications ................................................................ 54

Manufacturer ................................................................................... 56

Declaration of conformity .............................................................. 57

Glossary .......................................................................................... 58

Safety instructions

Please read the safety instructions carefully before operating the

receiver.

Please follow all warnings and instructions on the equipment and in

the operating manual.

Basic safety instructions

Electrical connection

•Disconnect the receiver from the power source in case of

operational disruptions. Please note: The receiver will remain live,

even if it is turned off with the mains switch on the rear side.

•Do not expose the receiver to rain or any kind of humidity to avoid

risk of fire and electric shock.

•Never open the casing. Otherwise, there is a risk of electric

shock.

•Connect the receiver only to a professionally installed mains

socket of 100–240 V, 50–60 Hz.

•Pull out the mains plug from the socket if the equipment is not in

use for a longer period of time. Only pull at the mains plug, not at

the cable.

•If foreign bodies or fluids enter the receiver, immediately pull out

the mains plug from the socket. Ask a qualified person to check

the equipment before operating it once again. Otherwise, there is

arisk of electric shock.

•Ensure that the power source (socket) is easily accessible.

•Do not bend or crimp the mains cable.

•If the mains cable is damaged, the receiver must be repaired by

an expert before reusing it. Otherwise, there is a risk of electric

shock.

•Never allow children to operate the receiver or to play with the

antenna unit unless supervised.

•Always ask qualified personnel to carry out maintenance jobs.

Otherwise, you are putting yourself and others at risk.

Safety instructions

Suitable location

•Place the receiver on a stable and even base.

•Avoid proximity to:

-heat sources, like e. g. heaters,

-naked flames, like e. g. candles,

-devices with strong magnetic fields, like e. g. loudspeakers.

-Never place receptacles filled with liquid (e. g. vases) on the

receiver

•Avoid direct sunlight and places with an extremely high amount of

dust.

•Never cover ventilation slits. Ensure adequate ventilation of the

receiver.

•Do not place any heavy objects on the receiver.

•Humidity may settle in the receiver if it is brought into hot

surroundings from a cold one. In this case, wait for about an hour

before operating the equipment.

•Arrange the mains and antenna cable in such a manner that no-

one steps or trips over them.

Safety instructions

Correct battery handling

•Batteries may contain toxic agents. Ensure that batteries are not

within the reach of children. Children may eat and swallow

batteries.

•Batteries that are getting discharged may damage the remote

control. If the receiver is not in use for a longer period of time,

remove the batteries from the remote control.

•Batteries may contain toxic agents that are hazardous to the

environment. Therefore, dispose of the batteries immediately

according to the prevailing statutory regulations. Never throw the

batteries into normal household waste.

Disposal

Never throw the digital terrestrial receiver or the

batteries in normal household waste. Ask your

municipal authorities or local government about

different methods for disposing of the equipment in

an eco-friendly and proper manner. Hand over

used batteries to a collection centre.

Explanation of safety instructions

The following categories of safety instructions are included in the

operating manual:

Danger!

Instructions with the word DANGER give a warning against

possible personal injuries.

Caution!

Instructions with the word CAUTION give a warning against

possible material or environmental damages.

These instructions contain special information for

commercial usage of the receiver.

Inhaltsverzeichnis

Andere Boca Empfänger Handbücher

Boca

Boca BocaVision STB121 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung