2
Table of content
I - Checking the supplied equipment .................................................................................................3
II - Overview of the product ................................................................................................................3
III - Wall mounting ...............................................................................................................................4
IV - Clamp mounting.............................................................................................................................4
V - Electrical connections ....................................................................................................................5
VI - Dip switches setting .......................................................................................................................5
Electrical and mechanical safety standards
- Installation and maintenance of this equipment should only be carried out by qualied and authorized personnel.
- Since BT6000 scoreboards are connected to a 110/240VAC supply, they must be installed in compliance with standard IEC 364.
- Indoor use (protected against mechanical shocks according to DIN18032.3 Standard).
- The 110/240VAC supply line for the shot clock panel must include a neutral/phase circuit breaker, rapidly accessible. This circuit
breaker must be switched off during maintenance operations.
- The installation must be completed before the equipment can be powered up.
- It is prohibited and dangerous to immerse the scoreboard in to water or clean it with a water jet.
- Installation ground connection as per EE or EN (earth/earth or earth/neutral) power supply diagram.
- Bodet shall not be held responsible for any use not in compliance with these instructions.
- Any modication to the product shall void the warranty.
