Bodyguard T460XC Bedienungsanleitung

! ! !

TREADMILL!MCB!CODE!SHEET!

Model!#!F9621***!!

! !

Revision!1.1!+!Dec.9.13!

Symbol

Description

Actions

Relay Position Abnormal

Usually accompanied by an Error 54

on the Display

Change Motor Control Board

Normal Operation – Relay is closed

Don’t do anything!

“Eight is Great” or “B is Beautiful”

Default Position when Relay

on MCB is open and waiting

for instruction.

Some errors cause the Relay to open, which then

causes ‘C’ to appear on the MCB. If the unit is not

operating and there is a ‘C’ on the MCB then there

should be an error on the display if it has power.

Speed Sensor Cable Error

(Error 53 appears on the Display)

Check that the speed sensor cable is

connected to the MCB on the connector

labeled “SPEED”. If not, attach it (Error C

appears on the LED) and reset the treadmill.

Check the speed sensor cable is not pinched.

* If the Speed Sensor light flashes when you

turn the motor but Error 53 still immediately

appears when the treadmill is turned on it could

be the R64 resistor on the MCB.

ROM/PC Self Check error

EPROM is correctly installed but it self-tested the

code and saw an error.

Most likely solution is a new EPROM.

Elevation Motor Error

Possibly Exceeding Range

Note: After changing an MCB or an

Elevation Motor an Elevation

Calibration must be completed.

Check the wire from the Elevation Motor is correctly

plugged in at the connector labeled “INCLINE”.

If it is not plugged in, the walking belt will run as

normal but when the user tries to increase or

decrease incline the value will change on the

screen but the elevation will not move.

If the wire is plugged in then Complete an Elevation

Calibration to see if the problem is solved.

If that doesn’t solve the problem, check the

resistance in OHMS (between the black and white

wires (not red) at the elevation connection) at the

maximum elevation (should be 450 Ohms) and

minimum elevation (850 Ohms)

! ! !

TREADMILL!MCB!CODE!SHEET!

Model!#!F9621***!!

! !

Revision!1.1!+!Dec.9.13!

Symbol

Description

Actions

Elevation Motor has a problem moving

Check Elevation Motor power wires are connected

correctly on the MCB.

If OK, then change the Elevation Motor.

Motor Power Circuit problem

Usually accompanied by an Error 52

on the Display

Change Motor Control Board

Data Cable or

Safety Key issue

If the Display has no power check if the Data Cable

is connected correctly or damaged.

If the Display has power, check if the Safety Key is

installed and then try to start the treadmill. If

“Please Put Safety Key” appears on the Display

then check the Reed Switch wiring is connected

correctly to the Display.

If the wiring is connected correctly then check the

Reed Switch is in the correct position inside the

console within range of the safety key magnet.

Check the reed switch is functioning correctly by

testing continuity on the reed switch.

The DC Voltage BUS is over its limit.

110V North American units should be

170 V DC so anything over 190 V DC

causes an Error “U”.

220V International units should be

350 V DC so anything over 380 V DC

causes an Error “U”

First, Check the AC power into the machine, it

should not exceed 125 V AC (N/A) or 240V AC

(International)

If the Power into the machine is OK then likely

solution is to change the Motor Control Board.

Dieses Handbuch passt für folgende Modelle

Andere Bodyguard Tretmühle Handbücher

Bodyguard

Bodyguard T700 Bedienungsanleitung

Bodyguard

Bodyguard PDG0002 - T560 Bedienungsanleitung

Bodyguard

Bodyguard T320X Bedienungsanleitung

Bodyguard

Bodyguard T-30 Bedienungsanleitung

Bodyguard

Bodyguard Treadmills Bedienungsanleitung

Bodyguard

Bodyguard T240 Bedienungsanleitung

Bodyguard

Bodyguard T240S Bedienerhandbuch

Bodyguard

Bodyguard LT280P Bedienungsanleitung

Bodyguard

Bodyguard T360 Bedienungsanleitung

Bodyguard

Bodyguard T240S Bedienungsanleitung

Bodyguard

Bodyguard T240 Bedienungsanleitung

Bodyguard

Bodyguard T280P Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung