assembly instructions BOCARD GB
BCD_OT-G-_:
2.
A B
BCD 160 150 155
1. Assembly of lid (OT) - base (UT) 2. Assembly of dividing panels and the terminal
compartment lid without wall brackets :
3. Wall assembly
1.
1.
2.
BCD 250 215 210
A B C
BCD 160 156,5 181 195,3
BCD 200 186,5 206 220,3
BCD 250 221,5 236 250,3
Snap the hinge onto the base (UT) (1.). Then close the lid (OT-G-_)
by swivelling it (2.).
BCD_FO-_:
The dividing panel is fixed by
screwing the front panel into
place.
as required
with wall brackets :
4.
Place front frame BCD_FO-_ in position
and clamp it in 4 places.
BCD _FO-K-_:
panel
Fit terminal compartment lid (BCD
as required
on TS 35 with DIN rail holder TSH 35-2:
1.
Hook on
1.
2.
Place front frame BCD_FO-K-_ in
position, clamp it in 2 places and screw
it to the terminal compartment.
BCD_OT-F-_:
Fit terminal compartment lid (BCD
integrated terminal compartment lid (BCD-__-FO-K-_). The terminal
compartment can be positioned upwards or downwards, as required (4.).
Open:
Closing mechanism for the hinged lids
BCD-_-OT-G-_ / BCD-_-OT-FSC-_:
Press the recessed
areas
Assembly Disassembly
4.
Turn out
5.
Take off
BOPLA Gehäuse Systeme GmbH
Borsigstr. 17-25
D-32257 Bünde
Art.-Nr. 20008010 Stand 03/2013
Tel.: 05223/969-0
Fax: 05223/969-100
www.bopla.de
Note: All lids/frames (except BCD_OT-G-_) can also be fitted rotated by 180°.
open
(over 180°)
closed snap point
(over 90°)
Mechanism:
manual with tool lockable
lock plugs
(included)
catch
(included)
lock SHLO 402
(accessory)
2.
Turn and
clamp in
Enclosure
3.
Push up
