Bosch DCN Next Generation 4.41 Anleitung zur Verwendung

DCN Next Generation 4.41

Release Notes

en Release Notes

DCN Next Generation Release Notes en | 2

Bosch Security Systems| 2014-10-31

DCN Next Generation Release 4.41

Table of Contents

1This release Contains........................................................................................................2

2Improved and added Functionality ..................................................................................2

3Release Compatibility Restrictions..................................................................................6

4Software, Firmware & FPGA versions .............................................................................7

5Additional Information to the DCN Manuals and Help Files..........................................9

6Trouble Shootings and known issues .............................................................................9

1This release Contains

The following versions are part of this release:

Product

version

DCN-SW

4.41

DCN-SWSMV

4.40

DCN-SWSACC

4.40

DCN-SWWA

1.11

DCN-DLT (CCU2)

4.41

DCN-CCU2

4.41

HdCameraControl

4.40

DCN-DLT (CCU, NCO)

3.10

DCN-CCU

3.10

2Improved and added Functionality

Release

Date

Release Comments

4.41

2014-11-02

New functionality and improvements

•Improved DCN wireless firmware to make it more robust in

environments with a lot of WiFi communication

•Unresponsive microphone control in Operator application due

to network disconnections

•Added DCN-SW icons to DVD

DCN Next Generation Release Notes en | 3

Bosch Security Systems| 2014-10-31

Release

Date

Release Comments

4.40

2014-07-30

New functionality and improvements

•Added Notebooker configuration to the API and

DcnApiDemonstrator

•Added AGC on/off to audio outputs of Audio Expander in

Individual Channels mode

•DCN-CCU2 supports Omneo Media Interface to interface with

DCN multimedia

•Added Mongolian to Concentus display

•ID cards can be programmed via API with and without CRC

•

Insert and remove of ID card can be executed via API to enable

interfacing with third party identification system

•Windows 8.1 support for DCN-SW

•Windows 8.1 support for DCN-SWSMV

•Windows 8.1 support for DCN-SWSACC

•Windows 8.1 support for HdCameraControl

•Added Crystal Reports installer to Tools directory. This needs

to be installed to print the voting reports from DCN-SWSMV.

Note

•Windows Vista is no longer supported for DCN-SW, DCN-

SWSMV, DCN-SWSACC, HdCameraControl

4.30

2014-01-31

New functionality and improvements

•DcnHdCameraControl added second video switcher Kramer

MV-6

•DcnHdCameraControl made screen line configurable

•DcnHdCameraControl added camera transition time

•added create groups, rename meetings, rename sessions,

request list via API (DCN-SWAPI) including demonstrator

application with source code.

Fixes

•Increased the vote description from 50 to 130 characters.

•

Indivual voting results not translated.

4.21

2013-09-30

Fixes

•Multi channel and multi lingual DCN-SWWA (version 1.1.1)

added.

•Russian helpfile missing in DCN-SW.

•Previous DCN-SW version cannot be upgraded because

database of previous DCN-SW version cannot be upgraded.

DCN Next Generation Release Notes en | 4

Bosch Security Systems| 2014-10-31

Release

Date

Release Comments

4.20

2013-07-15

New functionality and improvements

•DCN-SW added Opinion Poll and Audience Response

(requires DCN-SWMV multi voting license)

•Select, Summon, Start, Hold, Stop of votings via API (DCN-

SWAPI) including demonstrator application with source code.

•DCN-SW copy vote and copy session added to Configuration

Application and API to improve usability

•Master Volume Control and Chairman Priority added to Control

API.

•Added Vietnamese and Indonesian language to DCN-SW,

DCN-SWSMV and DCN-SWSACC

•Added get and set System ID for slave CCU’s to Open

Interface

•Response list length increased from 5 to max 25 and made

configurable on CCU and via DCN-SW

•Number of Open Microphones (NOM) increased from 4 to 25.

•Number of seats which can be added to the Notebook

increased from 15 to 25.

•Increased Operator Application target size

•Added group speech timers to DCN-SWSMD (and

DcnSmdDemonstrator application)

•Added show last minute of speech by blinking microphone LED

•Added a new audio routing option to the CCU: Insert no AGC.

Fixes

•DCN-SW added Czech, language to the installer.

•Show OI connection on CCU

•Solved inconsistencies in showing voting results

•Solved SMD error regarding loss of speaker information when

chairman speaks and ID cards and speechtimers are used.

•Voting control on desktop does not show graphs for group

results

DCN Next Generation Release Notes en | 5

Bosch Security Systems| 2014-10-31

Release

Date

Release Comments

4.10

2013-04-17

New functionality and improvements

•Start/Stop Meeting and Session and Microphone Management

control via API (DCN-SWAPI) including demonstrator

application with source code.

•Control of the IDesk outgoing channel using DCN Operator

Application (requires DCN-SWSI license).

•DCN-SW added Voice Activated Microphone Logging to

identify which microphone is active in VOICE mode (requires

DCN-SWVAML license). Can be used in combination with

camera control to see who is speaking is voice mode.

•DCN-SW font colour below icons on layout can be changed.

•DCN-SW Meeting can be copied (including all settings) using

Configuration Application and API.

•Demonstrator application including source code for DCN-

SWSMD XML streaming meeting data.

•HD Camera Control via DCN-SWSMD streaming meeting data.

•DCN-SW added Czech language to the GUI. Czech language

has to be copied manually, please refer to the Tools\Language\

directory.

•Extended the explanation about the TCP connection in Open

Interface description.

•DCN-SWWA Webcast application added. Only English User

interface. Only one audio-channel/language.

Fixes

•DCN-SWSMD information regarding microphone on off.

•DCN-SWSMD information empty when session name and

description are identical.

•Stopping an Operator-control session does not clear request

list.

•DCN-MR wave form and audio sometimes not in sync.

•DCN-SW not all GUI texts fit.

•DCN-SWSMV Reset microphone sensitivity ALL

MICROPHONES.

•DCN-CCU2 can cause acoustic feedback when powered up in

Insertion mode.

•DCN-SW added Slovenian language to GUI. Made Japanese

helpfile part of the installer. Added Thai, Polish and Finnish

language to the installer.

•DCN-SWSMD Participant is made absent when Chairman

speaks in Operator with response mode.

•Quorum shows strange behaviour with ID-cards and Secret

voting.

•Performance and stability improvements on DCN SW Server

and Operator Control

•Delegate names are not shown in speakerlist when using

access control for voting only.

4.03

2012-07-15

Fixes

•DCN-SW Operator Application can cause a fault pop up upon

user login and start session.

•DCN-SW Configurator Application can cause a fault pop up

when a document will be inserted with a file name that is too

long.

•DCN-SW Printing Application will not start up in Spanish,

Catalan, Portuguese and Polish.

4.02

2012-04-16

Fixes

•Inserting or withdrawing of ID-cards could lead to fault pop up.

DCN Next Generation Release Notes en | 6

Bosch Security Systems| 2014-10-31

Release

Date

Release Comments

4.01

2012-03-01

Fixes

•Auto-relay is always activated when the B-output channel is

selected (Using DCN-SW with DCN-SWSI).

4.00

2011-12-02

•DCN-CCU2 replaces DCN-CCU, DCN-WCCU and DCN-NCO

•DCN-CCUB2 replaces DCN-CCUB

3.10

2011-07-26

New functionality and improvements

•Simultaneous Interpretation DCN-SWSI added

•Usher call and speak slowly requests support DCN-SWMD

•DCN-SW GUI languages: de, ca, en, es, fr, hu, it, jp, ko, lt, nl,

no, pt, ru, sv, zh-chs

•DCN-SW help files languages: de, en, es, fr, it, nl, zh-chs

•Seat assignment and seat definition improved

•DCN-SWSACC indicates when DCN-SWSACC licenses is

missing.

3Release Compatibility Restrictions

The following versions are compatible with this release:

Product

FPGA

DCN-CCU2

4.4x

DCN-CCU

1.07

3.1x

DCN-CCU in multi CCU mode

>=5.0

>=2.17

DCN-NCO

LBB 4120/00 Interpreter desk

>=1.2

Toggle in DCN-IDESK

>=1.40.xxxx

The following applications are compatible with this release:

Product

FPGA

DCN-SW

4.00.3959

4.40

DCN-SWSMV

4.40

DCN-SWSACC

4.40

DCN-MR

2.0

Download and License Tool

4.40

DCN-SWWA

1.10

HdCameraControl

4.40

Optical devices

5.02

DCN-SWSMV: exporting voting results to PowerPoint is only supported for PowerPoint 2003.

DCN-SWWA requires DCN-CCU(B)2.

Wireless Units:

New firmware is developed for the DCN Wireless units to operate with the DCN-CCU2 (e.g.

encryption functionality). This firmware can be uploaded using the Download and License Tool

(DLT) and the Upgrade Toolkit (DCN-UPTK). This firmware works with DCN-CCU2 and DCN-

WCCU.

Products with the following hardware version have already this firmware installed.

Product

DCN-WD-D

02/04

DCN-WDD-D

02/04

DCN-WDV-D

02/04

DCN-WDCS-D

02/05

DCN-WDDCS-D

02/05

DCN-WDVCS-D

02/05

DCN Next Generation Release Notes en | 7

Bosch Security Systems| 2014-10-31

4Software, Firmware & FPGA versions

The table below provides a versions overview of parts which cannot be downloaded using the

Download and License Tool or the DCN-UPTK Wireless upgrade Tool kit.

Please contact your local Bosch representative how to update these parts.

The HW column indicates if the Hardware Version of the product is supported for the listed parts.

For product which cannot show the FPGA version, the HW version belonging to the FPGA version

is shown between brackets after the FPGA version.

DCN-CCU & DCN-WCCU

FPGA

Fixes

2.23

≥ 4.0

Slow reacting Multi CCU system

2.22

≥ 4.0

Noise or no audio on delegate loudspeaker

2.20

≥ 4.0

Unstable system after start-up due to optical network disturbances

2.19

≥ 4.0

Noise on delegate loudspeaker

2.18

≥ 4.0

Unexpected beeps on delegate loudspeaker fixed

DCN-CCUB

FPGA

Fixes

1.22

≥ 1.0

Noise or no audio on delegate loudspeaker

1.09

≥ 1.0

Noise on delegate loudspeaker

1.08

≥ 1.0

Unexpected beeps on delegate loudspeaker

DCN-CONxx range

FPGA

Fixes / Additions

1.17 (hw1.12)

≥ 1.0

Address might be lost after system restart

1.14 (hw1.10)

≥ 1.0

11Khz noise

1.10.xxxx (hw1.13)

≥ 1.0

CRC check added for ID-cards

DCN-DDI

FPGA

Fixes / Additions

2.2 (hw02.01)

≥ 1.0

11Khz noise

2.0 (hw02.00)

≥ 1.0

CRC check added for ID-cards

DCN-DIS range

FPGA

Problem fixed

1.20 (hw02.06)

≥ 1.0

11Khz noise

1.18 (hw02.03)

≥ 1.0

Disturbed audio on headphones for channels > 28

Address might be lost after system restart

1.15

≥ 1.0

Channel auto increment equal to DCN-CON

1.13 (hw02.02)

≥ 1.0

Audio distorted on headphones

DCN-FCS

FPGA

Fixes

2.7 (hw02.02)

≥ 2.0

11Khz noise

DCN-IDESK

FPGA

Fixes / Additions

2.1

≥ 2.0

11Khz noise

1.41.xxxx

≥ 1.0

loudspeaker symbol might be shown in front of the quality indicator

after leaving the Idesk’s installation menu

1.40.xxxx

≥ 1.0

B Toggle added

INT-TX Range

DCN Next Generation Release Notes en | 8

Bosch Security Systems| 2014-10-31

FPGA

Fixes / Additions

02.03

≥ 1.0

The display might show unexpected characters

02.02

≥ 1.0

Improved stability when used in combination with the DCN system

02.01

≥ 1.0

Improved stability when used in combination with the DCN system

02.00

≥ 1.0

Initial version

DCN Next Generation Release Notes en | 9

Bosch Security Systems| 2014-10-31

5Additional Information to the DCN Manuals and Help

Files

Reference

What

DCN-SW

When installing DCN-SW on a Windows 7 PC you might get the following

notification:

This is because within the time installer checks for framework, SQLServer

installation starts which prompt for the framework installation.

Please press OK, after this the framework will be installed from the DCN-SW

installer and DCN-SW installation will install successful.

Wireless

Discussion

Units

Wireless Discussion Units which are produced before 2012 need to be upgraded

using the DCN-UPTK and DLT (4.xx) in order to operate with a DCN-CCU2.

DCN-

SWSMV

Showing voting results in PowerPoint

In case PowerPoint is used to show the voting result, it might happen that

PowerPoint starts and overlaps the user interface of DCN-SWSMV completely.

Use the Windows task bar to select DCN-SWSMV again.

DCN-

SWSMV

Printing voting results

To print voting results, Crystal Reports needs to be installed. It is located in the

Tools directory of the DVD.

6Trouble Shootings and known issues

This trouble shootings and known issues are in addition to chapter 2 and to the trouble shooting

chapter in the user manuals.

Product/function

Problem

Solution

DCN-SW

Configuration

Application

In rare occasions it

can happen that the

application closes

unintended.

Restart the DCN-SW Configuration Application.

DCN-SW rinting

individual voting

results manually

Individual voting

results are not printed

when printed

manually via Bosch

DCN SW Print

Application.

Change the voting template accordingly:

1. Check the “Automatic print after stop of the

voting” checkbox.

2. Change the settings to Total, groups and

individuals.

3. Uncheck “Automatic print after stop of the

voting” checkbox.

DCN-SW multi PC

Client cannot connect

with Server when

multiple network

adapters are available

Configure the adapter settings in such a way that the

network adapter which is used for DCN NG is the

highest in the list of connections in Adapters and

Bindings

DCN-SW

Delegate both in

Request to speak as

Request to respond

list.

If a delegate is both in the Request to Respond as in

the Request to Speak list and you want to shift the

Request to Speak to Speaking, first cancel the

Request to Respond.

DCN Next Generation Release Notes en | 10

Bosch Security Systems| 2014-10-31

Product/function

Problem

Solution

DCN-SW

On 64-bit operating

systems, it might

difficult to find

previous SQL-server

during DCN-SW

installation, when

initial SQL-installation

was not default.

During installation of DCN-SW the installation process

might not be able to find the previous SQL-server, in

case during initial installation another name for the

SQL-server was created, instead of using the default

name. Therefore it is recommended to use the default

name and folder during initial SQL-installation. If a

SQL-server with a non-default name needs to be

found, the correct name should be entered manually

in the applicable box during DCN-SW installation.

DCN-SW

System overview

does not show all

connected devices

when system is still

powering up.

Wait until DCN-system is powered up completely and

then check the connected devices via DCN-SW

configuration application VIEW \ System Overview.

DCN-SW

DCN-SW Master

Volume is different

from CCU volume

control

When the Master Volume of the CCU has been

changed while DCN-SW was disconnected, the DCN-

SW Master Volume will not reflect the CCU-setting.

Changing the DCN-SW volume setting, will make

them identical again.

DCN-SW

Downgrade to

versions <3.10 not

possible.

Manually uninstall SWL server 2008.

Note that the DCN-SW database (the database

contains all settings like seats, meetings, synoptic

layouts, etc.) will always be removed during a

downgrade.

DCN-SW

Unexpected

behaviour or no

reaction of DCN-SW.

Due to Windows Automatic Updates some critical

components like SQL Server Express might be

temporarily not available for DCN-SW.

Do not set Automatic Updates to Automatic or restart

your system after the Automatic updates have been

installed.

DCN-SW

Generates errors after

Windows Stand by..

Disable Stand by functionality in the Windows

operating system.

DCN-SWPV

Secret mode does not

work in ad-hoc voting

Update to version 2.80 or higher

DCN-SWPV

Voting attention tone

cannot be changed

during a running

meeting.

The voting attention tone can be changed in the

voting template but becomes effective after a vote has

been selected or started.

DCN-SW setup

repair

Error code 2869 or

Fatal error during

installation.

Remove DCN-SW with DCN-SW setup and make a

new installation. Settings are stored in the SQL-

database and can be re-used in the new installation.

DCN-SWSMV

Error notification upon

closing DCN-SWSMV

directly after opening

it.

Please wait at least 10 seconds to close DCN-

SWSMV after opening it.

DCN-SWSMV help

file

When opening help

file you get an error.

Just close the error notification.

DCN-SWSMV

DCN-SWSMV will not

start

Voting legends cannot be changed into “Not Voted”.

Remove “BCPCSettings.xml” which can be found:

For XP:

“…\Documents and Settings\All Users\Application

Data\Bosch\DCN Synoptic Microphone and Voting

Software\x.xx”

For Vista:

“…\Programdata\Bosch\DCN Synoptic Microphone

and Voting Software\x.xx”

Inhaltsverzeichnis

Andere Bosch Konferenzsystem Handbücher

Bosch

Bosch CCS 1000 D Bedienungsanleitung

Bosch

Bosch B426 Handbuch

Bosch

Bosch DCN-WD Referenzhandbuch

Bosch

Bosch DCN multimedia Bedienungsanleitung

Bosch

Bosch DICENTIS Bedienungsanleitung

Bosch

Bosch INTEGRUS Leitfaden

Bosch

Bosch DICENTIS Installations- und Betriebshandbuch

Bosch

Bosch DICENTIS Merkblatt

Bosch

Bosch DCN-DS Bedienungsanleitung

Bosch

Bosch DICENTIS Merkblatt

Bosch

Bosch DCN-DIS Bedienungsanleitung

Bosch

Bosch DICENTIS Montageanleitung

Bosch

Bosch DICENTIS Montageanleitung

Bosch

Bosch CCS 1000 D Anleitung zur Verwendung

Bosch

Bosch DICENTIS Montageanleitung

Bosch

Bosch DCN-CON Concentus Delegate Unit Referenzhandbuch

Bosch

Bosch DICENTIS Bedienungsanleitung

Bosch

Bosch DICENTIS Bedienungsanleitung

Bosch

Bosch DCN multimedia Bedienungsanleitung

Bosch

Bosch DCN multimedia 1.41 Anleitung zur Verwendung

Bosch

Bosch DICENTIS Bedienungsanleitung

Bosch

Bosch DICENTIS Installations- und Betriebshandbuch

Bosch

Bosch Digital Congress Network Bedienungsanleitung

Bosch

Bosch DICENTIS Merkblatt

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung