Bosch NBC-225-P Bedienungsanleitung
IP Camera 200 Series
NBC-225-P
en Installation and Operation Manual
IP Camera 200 Series Table of Contents | en 3
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
Table of Contents
1Safety 7
1.1 Safety precautions 7
1.2 Important safety instructions 8
1.3 FCC & ICES compliance 9
1.4 UL certification 11
1.5 Bosch notices 11
1.6 Copyrights 12
2 Introduction 13
2.1 Features 13
2.2 Unpacking 14
3 Installation 15
3.1 Power connection 15
3.1.1 DC power connection 15
3.2 Network (and power) connector 16
3.3 I/O connector 17
3.4 Audio connectors 18
3.5 Resetting the camera 18
3.6 SD card 19
3.7 Mounting the camera 19
4 Browser connection 21
4.1 System requirements 21
4.2 Establishing the connection 21
4.2.1 Password protection in camera 22
4.3 Protected network 22
4.4 Connection established 23
4.4.1 LIVEPAGE 23
4.4.2 RECORDINGS 23
4.4.3 SETTINGS 23
4en | Table of Contents IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
5 Basic Mode 25
5.1 Basic Mode menu tree 25
5.2 Device Access 26
5.2.1 Camera name 26
5.2.2 Password 26
5.3 Date/Time 27
5.4 Network 28
5.5 Encoder Profile 29
5.6 Audio 29
5.7 Recording 29
5.7.1 Storage medium 29
5.8 System Overview 29
6 Advanced Mode 30
6.1 Advanced Mode menu tree 30
6.2 General 31
6.2.1 Identification 31
6.2.2 Password 31
6.2.3 Date/Time 32
6.2.4 Display Stamping 34
6.3 Web Interface 36
6.3.1 Appearance 36
6.3.2 LIVEPAGE Functions 37
6.3.3 Logging 38
6.4 Camera 39
6.4.1 Encoder Profile 39
6.4.2 Encoder Streams 42
6.4.3 Video 43
6.4.4 Audio 44
6.4.5 Installer Options 44
6.5 Recording 45
6.5.1 Storage Management 46
6.5.2 Recording Profiles 49
6.5.3 Retention Time 50
6.5.4 Recording Scheduler 51
6.5.5 Recording Status 52
IP Camera 200 Series Table of Contents | en 5
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
6.6 Alarm 53
6.6.1 Alarm Connections 53
6.6.2 Video Content Analyses (VCA) 56
6.6.3 VCA configuration- Profiles 57
6.6.4 VCA configuration - Scheduled 63
6.6.5 VCA configuration - Event triggered 65
6.6.6 Audio Alarm 66
6.6.7 Alarm E-Mail 67
6.7 Interfaces 69
6.7.1 Alarm input 69
6.7.2 Relay 69
6.8 Network 71
6.8.1 Network 71
6.8.2 Advanced 75
6.8.3 Multicasting 76
6.8.4 JPEG Posting 77
6.9 Service 79
6.9.1 Maintenance 79
6.9.2 System Overview 81
7 Operation via the browser 82
7.1 Livepage 82
7.1.1 Processor load 82
7.1.2 Image selection 83
7.1.3 Digital I/O 83
7.1.4 System Log / Event Log 83
7.1.5 Saving snapshots 83
7.1.6 Recording video sequences 83
7.1.7 Running recording program 84
7.1.8 Audio communication 84
7.2 Recordings page 85
7.2.1 Controlling playback 86
8 Troubleshooting 88
8.1 Resolving problems 88
8.2 Customer service 88
6en | Table of Contents IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
9 Maintenance 89
9.1 Repairs 89
9.1.1 Transfer and disposal 89
10 Technical Data 90
10.1 Specifications 90
10.1.1 Dimensions 92
10.1.2 Accessories 92
IP Camera 200 Series Safety | en 7
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the device.
8en | Safety IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Generally, using a dry cloth for cleaning is
sufficient but a moist, fluff-free cloth or leather shammy
may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Water - Never spill liquid of any kind on the unit.
4. Lightning - Take precautions to protect the unit from
power and lightning surges.
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
6. Power sources - Operate the unit only from the type of
power source indicated on the label.
7. Servicing - Unless qualified, do not attempt to service this
unit yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts - Use only replacement parts specified
by the manufacturer.
9. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
10. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.
IP Camera 200 Series Safety | en 9
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
1.3 FCC & ICES compliance
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
10 en | Safety IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
Informations FCC et ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Suite à différents tests, cet appareil s'est révélé conforme aux
exigences imposées aux appareils numériques de classe B, en
vertu de la section 15 du règlement de la Commission fédérale
des communications des États-Unis (FCC), et en vertu de la
norme ICES-003 d'Industrie Canada. Ces exigences visent à
fournir une protection raisonnable contre les interférences
nuisibles lorsque l'appareil est utilisé dans le cadre d'une
installation résidentielle. Cet appareil génère, utilise et émet
de l'énergie de radiofréquences et peut, en cas d'installation ou
d'utilisation non conforme aux instructions, engendrer des
interférences nuisibles au niveau des radiocommunications.
Toutefois, rien ne garantit l'absence d'interférences dans une
installation particulière. Il est possible de déterminer la
production d'interférences en mettant l'appareil
successivement hors et sous tension, tout en contrôlant la
réception radio ou télévision. L'utilisateur peut parvenir à
éliminer les interférences éventuelles en prenant une ou
plusieurs des mesures suivantes:
– Modifier l'orientation ou l'emplacement de l'antenne
réceptrice;
– Éloigner l'appareil du récepteur;
– Brancher l'appareil sur une prise située sur un circuit
différent de celui du récepteur;
– Consulter le revendeur ou un technicien qualifié en radio/
télévision pour obtenir de l'aide.
Toute modification apportée au produit, non expressément
approuvée par la partie responsable de l'appareil, est
strictement interdite. Une telle modification est susceptible
d'entraîner la révocation du droit d'utilisation de l'appareil.
La brochure suivante, publiée par la Commission fédérale des
communications (FCC), peut s'avérer utile : How to Identify and
Resolve Radio-TV Interference Problems. Cette brochure est
disponible auprès du U.S. Government Printing Office,
Washington, DC 20402, États-Unis, sous la référence n° 004-
000-00345-4.
Andere Handbücher für NBC-225-P
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Bosch IP-Kamera Handbücher
Bosch
Bosch MIC IP ultra 7100i Bedienungsanleitung
Bosch
Bosch MIC IP fusion 9000i Bedienungsanleitung
Bosch
Bosch LTC 7960 Series Bedienungsanleitung
Bosch
Bosch Flexidome IP 4000i Bedienungsanleitung
Bosch
Bosch MicroDome NDC-274-PT Gebrauchsanweisung
Bosch
Bosch A1 Security Cameras IR Illuminator 5000... Installations- und Betriebshandbuch
Bosch
Bosch NWC?0495 Bedienungsanleitung
Bosch
Bosch FLEXIDOME IP panoramic 6000 IC Bedienungsanleitung
Bosch
Bosch Onvif NTC-255-PI Bedienungsanleitung
Bosch
Bosch NDC-265-P Bedienungsanleitung
Bosch
Bosch EX85 Bedienungsanleitung
Bosch
Bosch NDC-455 Bedienungsanleitung
Bosch
Bosch FlexiDome NDN-498V03-21P Bedienungsanleitung
Bosch
Bosch NBC-265-W Bedienungsanleitung
Bosch
Bosch NDN-265-PIO Bedienungsanleitung
Bosch
Bosch NDC-225-PI Bedienungsanleitung
Bosch
Bosch NBC-455 Bedienungsanleitung
Bosch
Bosch AutoDome 800 HD Bedienungsanleitung
Bosch
Bosch NIN-51022-V3 Bedienungsanleitung
Bosch
Bosch Autodome IP 4000 HD Montageanleitung
