Bosch A1 Security Cameras IR Illuminator 5000... Installations- und Betriebshandbuch

IR Illuminator 5000

IIR-50850 | IIR-50940

en Installation Note

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

3 IR Illuminator 5000 Safety | en

Safety

Safety message explanation

Caution!

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Notice!

Indicates a situation which, if not avoided, could result in

damage to the equipment or environment, or data loss.

Safety precautions

Caution!

Risk Group 2 Caution: IR emitted from this product

Avoid eye exposure, use appropriate shielding or eye

protection.

Caution!

Installation should only be performed by qualified service

personnel in accordance with the National Electrical Code

(NEC 800 CEC Section 60) or applicable local codes.

Caution!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -

Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

Caution!

These units must be properly and securely mounted to a

supporting structure capable of sustaining the unit weight. Use

care when selecting mounts for installation; the mounting

surface and unit's weight should be carefully considered.

Bosch Security Systems 2016.8 | 1.0 | AM18-Q0715

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

4 en | Safety IR Illuminator 5000

Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Follow all warnings before operating the

device.

– Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

– Do not install device near any heat sources such as

radiators, heaters, stoves, or other equipment (including

amplifiers) that produce heat.

– Never spill liquid of any kind on the device.

– Take precautions to protect the device from power and

lightning surges.

– Adjust only those controls specified in the operating

instructions.

– Operate the device only from the type of power source

indicated on the label.

– Unless qualified, do not attempt to service a damaged

device yourself. Refer all servicing to qualified service

personnel.

– Install in accordance with the manufacturer's instructions in

accordance with applicable local codes.

– Use only attachments/accessories specified by the

manufacturer.

– Permanently connected devices must have an external,

readily operable mains plug or all‑pole mains switch in

accordance with installation rules.

– Disconnect power supply and arrange for the device to be

serviced by qualified personnel if:

– The power cable/plug is damaged.

– Liquids or foreign bodies have entered the device.

– The device has been exposed to water or extreme

environmental conditions.

– The device is faulty despite correct installation/

operation.

2016.8 | 1.0 | AM18-Q0715 Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

5 IR Illuminator 5000 Safety | en

– The device has fallen from a height, or the housing has

been damaged.

– The device performance is noticeably changed.

Notices

FCC & ICES Information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult the

dealer or an experienced radio/television technician for

corrective action.

Bosch Security Systems 2016.8 | 1.0 | AM18-Q0715

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

6 en | Safety IR Illuminator 5000

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office, Washington,

DC 20402, Stock No. 004-000-00345-4.

Disposal - Your Bosch product was developed and

manufactured with high-quality material and components that

can be recycled and reused. This symbol means that

electronic and electrical appliances, which have reached the

end of their working life, must be collected and disposed of

separately from household waste material. Separate collecting

systems are usually in place for disused electronic and

electrical products. Please dispose of these units at an

environmentally compatible recycling facility, per European

Directive 2012/19/EU.

2016.8 | 1.0 | AM18-Q0715 Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

7 IR Illuminator 5000 Installation | en

Installation

Mounting the bracket

Connect the bracket to the illuminator as follows:

1. Ensure that the parts are mounted in the following order:

– Socket head screw

– Lock washer

– Washer

– Illuminator

– Bracket

2. Use the supplied socket wrench to secure the bracket on

both sides of the illuminator.

Bosch Security Systems 2016.8 | 1.0 | AM18-Q0715

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

8 en | Installation IR Illuminator 5000

Changing the beam-angle filter

Insert a beam-angle filter as follows:

1. Insert the supplied tool into the slot and twist. (Use the

thick end for the IIR-50xxx0-SR illuminator; use the tapered

end for all other illuminators.)

IIR-50xx0-SR

IIR-50xx0-MR/LR/XR

2. Remove the top cover.

3. Peel back the protective foil from the adhesive points.

4. Attach the selected beam-angle filter with the label side up

to the adhesive points.

“click”

5. Click the top cover back into place.

2016.8 | 1.0 | AM18-Q0715 Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

9 IR Illuminator 5000 Connection | en

Connection

{

Power

– To power the illuminator connect a 12 to 32 VDC or a

24 VAC supply from a SELV class 2 power supply to wires

5 (+ red) and 6 (- black).

Illuminator masters the camera

To use the light sensor in the illuminator to switch the day/night

function of the camera:

1. Connect wires 1 (+ white) and 2 (- yellow) to the alarm

input of the camera.

2. If required, adjust the Photocell adjust control to

determine the switching points of the illuminator.

Camera masters the illuminator

To control illuminator switching from the camera:

1. Turn the Photocell adjust control fully counterclockwise.

2. Connect a relay output from the camera to wires 3 (–

green) and 4 (+ blue).

Bosch Security Systems 2016.8 | 1.0 | AM18-Q0715

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

10 en | Connection IR Illuminator 5000

Setting up

To achieve the best results set up at night and view the results

on a monitor.

1. Mount the illuminator and connect as described above.

2. Adjust the pan of the illuminator to match the camera’s

field of view.

3. Loosen the bolts on each side of the unit and adjust the

vertical alignment to maximize the results:

– Tilt the unit downwards until the near part of required

field of view is saturated with light as viewed on the

monitor.

– Slowly tilt the unit upwards until the furthest part of

the required field of view is illuminated correctly on

the monitor.

4. Re-tighten the bolts.

2016.8 | 1.0 | AM18-Q0715 Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch IP-Kamera Handbücher

Bosch

Bosch NWC-0455-20P Bedienungsanleitung

Bosch

Bosch NWC-0495-20P Bedienungsanleitung

Bosch

Bosch MegaPixel NWC-0800 Bedienungsanleitung

Bosch

Bosch Flexidome IP 4000i Bedienungsanleitung

Bosch

Bosch NBC-255-P Bedienungsanleitung

Bosch

Bosch NBC-265-W Bedienungsanleitung

Bosch

Bosch NIN-51022-V3 Bedienungsanleitung

Bosch

Bosch Onvif NTC-255-PI Gebrauchsanweisung

Bosch

Bosch MIC Series 550 Bedienungsanleitung

Bosch

Bosch NBC-455 Bedienungsanleitung

Bosch

Bosch NBC-225-P Bedienungsanleitung

Bosch

Bosch FlexiDome NDN-498V03-21P Bedienungsanleitung

Bosch

Bosch MIC-7130 Bedienungsanleitung

Bosch

Bosch NDC-265-P Bedienungsanleitung

Bosch

Bosch NII-41012-V3 Bedienungsanleitung

Bosch

Bosch DinionHD NBN-921 Bedienungsanleitung

Bosch

Bosch NBC-265-P Bedienungsanleitung

Bosch

Bosch AVIOTEC IPSTARLIGHT 8000 Bedienungsanleitung

Bosch

Bosch MIC IP fusion 9000i Bedienungsanleitung

Bosch

Bosch NDN-498 Bedienungsanleitung

Bosch

Bosch Infrared Imager EX80 Bedienungsanleitung

Bosch

Bosch MicroDome NDC-274-PT Gebrauchsanweisung

Bosch

Bosch MIC IP ultra 7100i Bedienungsanleitung

Bosch

Bosch NBC-225-P Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung