OCL8850 Quick Reference Guide
Check wheel bearing.
Note: Rotor must remain in
place on hub at all times.
Remove wheel.
Fix all bolts/nuts and drive
adapter 50 Nm (37 ft-lb).
Remove caliper and clean
mounting surfaces.
Fit rubber silencer. Fit adapter; bolts M10 or larger
[50 Nm (37 ft-lb)].
Fit lathe [50 Nm (37 ft-lb)],
place drive unit, and machine rotor.
Read and follow the instruction manual before assembling, installing, operating, or servicing the equipment. 577365 REV A
OCL 8850
