Bosch INDEGO 350 Bedienungsanleitung

myRobotcenter

The expert for robots in your home

With one click to the online shop

myRobotcenter.eu myRobotcenter.co.uk

Indego 350/400

Indego 350/400 Connect

Home made by you.

Installation guide GB / DE / FR / NL / IT / ES / PT

Table of contents

Know your Indego 06

Lawn preparation 08

Docking station placement 10

Power connection 12

Perimeter wire layout 14

Screen settings and mapping your lawn 18

Your Indego is intelligent 20

Indego 350/400

Indego 350/400 Connect

Installation guide

Home made by you.

English

GB Please

read the

instructions

before installing

your Indego.

If you prefer you can watch

our installation video by

scanning the QR code here:

QR-Code wird

aktualisiert

1 2 3

5 6

10 89

!Know your Indego

Top of Indego

1 Stop button

2 Display

3 Rating label

4 Anti theft sticker

5 Mower ‘On’ indicator

6 Height of cut button

7 QR-Code B

(Indego 350 Connect/400 Connect)

8 Drive wheels

9 Bumper

10 Charging contacts (pins)

11 Height of cut – release button

Bottom of Indego

1 Cutter blades

2 Caster wheels

3 Data connection port

4 On/oﬀ switch

5 Handle

Docking station

1 Docking station rating label

2 Red terminal

3 Black terminal

4 Charging socket

5 Areas for docking screws

6 House symbol

7 Docking station tubing

8 Charging pins (contacts)

9 Dock indicator

10 Garden symbol

You have a 5 step process for installing your Indego. If you do not

follow these steps the Indego will not work. If you prefer you can

watch our installation video by scanning the QR code here:

All these items are

contained in the carton:

1 Indego

2 Docking station

3 Docking station cover

4 Power supply unit

5 Perimeter wire

6 Pegs (to keep the perimeter

wire in place)

7 Two wire connectors

8 Screws and hex key

(for docking station)

9 Two rulers (30 cm and 75 cm)

10 Instruction manual and

installation guide

Tools required (not included):

▶ Mallet (to secure the pegs)

▶ Wire strippers (to cut and

strip the wire)

QR-Code wird

aktualisiert

1Lawn preparation

First you will need to prepare the lawn. This is a key step

for a successful installation. Please have a close look at

your lawn and any objects on it.

Remove foreign objects

from the cutting area.

Clear lawn of stones, loose pieces of wood,

wire, mains cables, and other foreign objects.

Cut the main area

of the lawn

to 40 mm.

Identify any objects

(trees, ﬂower beds, ponds, …) to ensure you

know what items to follow when marking the

garden. These will need to be wired around

later. Slopes bigger than 27%, etc.

Cut the area where

you intend to lay the

perimeter wire

to the lowest setting you have with

your conventional mower.

1.1

1.3

Now your lawn is

ready to start the

installation.

1.2

1.4

2Docking station placement

Determine the best place to position your docking station,

where your Indego will return on its own to get charged.

Separate the mower from the docking station.

Place the docking station

on level ground.

This will allow your Indego to dock correctly.

Place the docking station

beside the cutting area

with a straight 1.5 m track in front

of the docking station.

It is recommended to place the docking

station in the corner of your lawn and

as close to the power supply as possible.

Additionally leave 1.0 m of free space

perpendicular to the docking station

as shown in the picture. This will

enable your Indego to return

to the docking station correctly

in a clockwise direction.

The docking station for your Indego should be placed

at the side of the lawn.

When placing the docking station it

is important that the charging pins

point left

(so you can read the Bosch logo whilst standing

outside the lawn area).

If the docking station is positioned with the charging pins

pointing either into the grass area or pointing to the right

your Indego will not run.

Make sure the docking station

is placed when possible out of

direct sunlight.

When your Indego receives direct sunlight for a pro-

longed period of time the battery can get too hot and

not function correctly.

Place the docking station close

to a power socket.

Total length of the power cable is 5 m plus 2 m from

the power supply to the plug.

Fix the 4 docking station screws

in place with the hex key.

They come together as a 5 piece set so you will need

to separate them ﬁrst.

2.1

2.2

2.3

2.4

2.5

2.6

max.

45 °C

30 cm

1.0 m

1.5 m

30 cm 30 cm

1110

ONOFF

3Power connection

We advise powering the docking station now so when you

have ﬁnished the installation the mower will be ready to go!

Feed the power supply through

the backing cover and into the

docking station.

Put the cable through the backing cover.

Do not clip the cover yet you will do this

in step 4.9.

Ensure the power supply is

in a cool, dry environment.

Plug the cable into an

indoor power socket.

You should now see a ﬂashing light

on the docking station.

Switch the Indego on.

The isolator switch is located at the back left

of the mower. Please note, if the mower is not

turned on, it will not charge. At this point,

nothing will be shown on the display.

Slide the mower into the

docking station for charging.

Although your Indego will have charge in the battery,

it is recommended to charge it fully before running it

for the ﬁrst time.

Make sure the isolator switch is on ( | ) before placing

the Indego in the dock.

Check the indicator on the

docking station is now stable.

If the indicator does not light up check that the mains plug

of the power supply is plugged in properly and that the

mower is in the station correctly.

3.1

3.2

3.3

3.4

3.5

3.6

1312

4Perimeter wire layout

This part of the installation will most likely take you the longest amount of time. We

will take you through it step by step. The perimeter wire needs to be set around the

lawn to deﬁne the areas you want to, and don’t want to cut. Pegs will help to keep the

wire in place. Use a mallet to insert them in the lawn. The perimeter wire can be laid

in alternative ways. Please see manual for details.

Leave the following distances

when installing the wire around the perimeter of the

cutting area, the distance between two pegs should be

75 cm as illustrated (use the rulers for this). For a more

accurate perimeter, we advise that you leave less than

75 cm between pegs when wiring objects (ﬂower beds,

bushes, trees and other items away from the edges).

▶ Level surface: 5 cm

If the working area borders against a ﬂat path or

surface that is level with the lawn your Indego will

be able to run over it. In such cases the perimeter

wire should be positioned right up to the edge of

the lawn (approx. 5 cm as you need to leave room

for the pegs). This is not applicable for gravel, as

your Indego could hit a stone or get stuck in the

gravel.

▶ Wall/fence/bush: 30 cm

If less than this your Indego will not have enough

space to run between the wire and the wall/fence/

bush and it will bump into it (and get scratched).

▶ Pond of water, deep step: >75 cm

This is because of safety reasons. In case there is

a power cut your Indego will stop after not

noticing the wire for 50 cm. You don’t want your

Indego to end up in a pond if there is a power cut!

▶ Distance between objects >75 cm

When marking objects (step 4.8) remember there

must be at least 75 cm distance between the two

objects. Leaving less distance than this will cause

some interference. This is applicable for all

robotic mowers using wire.

Take the plastic out

from the reel

and pull the end of the perimeter wire.

Feed the perimeter wire

through the tubing on the docking station as

indicated by the arrow on the docking station,

until it appears on the other side.

Strip carefully

10–15 mm of insulation oﬀ the wire.

4.1

4.2

4.3

Pull the wire from the coil,

tauten and ﬁx it

with one peg next to the docking station

(behind the arrow). Ensure the wire is straight

and in line with the docking station tubing for

1.5 m (continuing to peg every 75 cm).

This enables your Indego to return to the

docking station correctly.

▶ If the wire is not straight and in line with the

docking station, the Indego will not work

and you will need to relay the wire.

4.6

Connect the wire

to the right hand (black) terminal.

4.5

4.4

30 cm

5 cm

30 cm

> 75 cm

30 cm

1.0 m

1.5 m

30 cm 30 cm

> 75 cm

1514

A B C

4Perimeter wire layout

…peg the wire down within 10 cm

in line with the docking station as

illustrated.

▶ A: Cut the wire and strip 10–15 mm of insulation off.

▶ B: Connect it to the left hand (red) terminal.

▶ C: Clip over the backing cover.

After a few weeks, the wire will disappear under the grass.

Approximately 20 cm of lawn around the ﬁxed object and

around the edge of the lawn will not be mown. For safety

reasons blades cannot reach up to the edge of the mower.

Lay the perimeter wire around the lawn area

and objects (4.8). Start from the docking station in an anti-clockwise direction.

This is important so your Indego cuts inside that area.

Use a mallet to insert the pegs in the ground (holding the wire in place)

and the 75 cm ruler provided to maintain the distance between them.

Marking permanent

objects (1.2)

Mark out permanent objects you do not want

the mower to run over, e.g. roots, ponds, rocks.

This will prevent your Indego colliding with

objects, or going straight into them.

▶ A: Run the wire from the lawn perimeter

to the object.

▶ B: Continue round the object in a

clockwise direction. When going

around the object use more pegs,

so they are closer than 75 cm.

▶ C: Return the wire back to the perimeter.

Ensure the distance from the wire

around the object and lawn perimeter

is at least 75 cm.

Please ensure that the two parallel wires

leading to and from the marked object are as

close as possible by placing the wire under the

same side of the peg. This will make the wire

undetectable to your Indego. Please ensure

that the wires do not cross over eachother at

any point.

Remember to leave 30 cm around the object

to the wire!

If objects are less than 75 cm from the lawn

edge, surround the object when installing the

wire, leaving the object outside of the lawn

cutting area.

Check from time to time that the wire does

not become loose, attach the wire to the

ground with additional pegs if it does.

4.7

4.8

4.9

When the perimeter wire has been

laid around the entire cutting area...

Ensure:

▶ There is no loose wire as it

could be cut during mowing.

▶ The wire is ﬂat to the

ground all the way.

Use additional pegs where

the wire is slack.

▶ The wire is taut before

placing the next peg (if you

can place a couple of ﬁngers

under the wire this is not

taut enough!).

▶ Increase the number

of pegs at a corner.

30 cm

75 cm

5 cm

~30 cm

<75 cm

0 cm

30 cm

75 cm

10 cm

10 cm 1 m

1 m

1716

Download Indego app

Enjoy watching your Indego

mowing the lawn for you!

5Screen settings and

mapping your lawn

To operate your Indego ensure the isolator switch is turned on at the back of

the mower then press the key. The screen will switch on after a few seconds.

Follow the on-screen instructions. Remember to note down your PIN code.

The buttons with the symbols ▲ or ▼ (up or down) allow you to choose an option

within a menu screen. The buttons with the symbols ▶ or ◀ allow you to go right

or left through the menu options. The key will take you to the previous menu

screen. The key will conﬁrm the selection or take you to the following screen

within the menu.

“Set Language”

5.1

Please make a note of your

PIN code here:

Enter your personal PIN code.

Keep the PIN code secret from third parties.

▶ The mower won’t work without your personal

PIN. If you own a non-Connect mower and you

have lost

your personal PIN code, you will have to

contact Bosch (see “After-Sales Service and Ap-

plication Service” contact details in the manual).

We recommend to register your mower through

the “My Bosch” website MyBosch-Tools.com

in order to recover your PIN faster.

▶ If you own an Indego Connect you can reset your

PIN code via the app.

5.2

Set time and date.

5.3

Press the key to map the garden.

The blades do not rotate when the machine follows the wire

during mapping. Whilst mapping your Indego will follow the

wire around the edge of the lawn area. Mapping is complete

when the machine touches the docking station. Confirm

this on the screen. Then the mower will drive back for a few

meters to enter the docking station.

Note: walk alongside Indego while it is following the edge.

5.4

Conﬁrm AUTO Calendar Function

After a successful installation, your Indego will know the

size and shape of your garden. You can either confirm the

recommended schedule for your lawn size, or set up a

mowing schedule in the “Menu > Calendar”. You can also

immediately begin to mow by pressing “Mow now”.

5.5

Set the height of cut for the grass.

Depending on the height of the grass in the lawn area,

it is recommended to start with a higher setting and then

gradually reduce the level.

Note: the Indego is designed to cut small pieces of grass

[5 mm] that then drop down and fertilise the soil.

5.6

If you have purchased an Indego Connect you can ﬁnish your

installation by setting up your account and completing the ﬁnal

steps through the Bosch Smart Gardening app – download now

by scanning the QR code here:

1918

Andere Handbücher für INDEGO 350

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Rasenmäher Handbücher

Bosch

Bosch Rotak 34-13 Bedienungsanleitung

Bosch

Bosch ROTAK 37 LI Bedienungsanleitung

Bosch

Bosch 0 600 882 104 Bedienungsanleitung

Bosch

Bosch Rotak 32 Bedienungsanleitung

Bosch

Bosch Rotak 32 Betriebsanleitung

Bosch

Bosch 0.600.881.K00 Bedienungsanleitung

Bosch

Bosch Rotak 33 Bedienungsanleitung

Bosch

Bosch AHM 30 Bedienungsanleitung

Bosch

Bosch Rotak 32 LI S Bedienungsanleitung

Bosch

Bosch ROTAK 34 LI Bedienungsanleitung

Bosch

Bosch ROTAK 43 GEN 4 Bedienungsanleitung

Bosch

Bosch Rotak 32 LI S Bedienungsanleitung

Bosch

Bosch Rotak 43 LI-2 Ergoflex Bedienungsanleitung

Bosch

Bosch 0.600.882.100 Bedienungsanleitung

Bosch

Bosch ASM 32 Bedienungsanleitung

Bosch

Bosch Rotak 37 Ergoflex Bedienungsanleitung

Bosch

Bosch Indego S 500 Bedienungsanleitung

Bosch

Bosch Professional GRA 53 Bedienungsanleitung

Bosch

Bosch ROTAK 34 LI Bedienungsanleitung

Bosch

Bosch ROTAK 320 Bedienungsanleitung

Bosch

Bosch AHM 30 Bedienungsanleitung

Bosch

Bosch ROTAK 320 Bedienungsanleitung

Bosch

Bosch Rotak 37 Ergoflex Bedienungsanleitung

Bosch

Bosch Rotak 32 LI S Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung