Bosch DWM 40 L PROFESSIONAL Bedienungsanleitung

Bedienungsanleitung . . . . . . . 6

Operating instructions . . . . . 13

Instructions d’emploi. . . . . . . 20

Instrucciones de servicio . . . 27

Manual de instruções . . . . . . 34

Istruzioni d’uso . . . . . . . . . . . . 41

Gebruiksaanwijzing . . . . . . . . 48

Betjeningsvejledning. . . . . . . 55

Bruksanvisning . . . . . . . . . . . . 61

Brukerveiledningen . . . . . . . . 67

Käyttöohje . . . . . . . . . . . . . . . . 73

Οδηγία χειρισµού . . . . . . . . . . 79

Kullanım kılavuzu . . . . . . . . . . 87

取扱説明書 . . . . . . . . . . . . . . . . . 93

操作指南 . . . . . . . . . . . . . . . . . . . 99

DWM 40 L

DWM 40 L Set

PROFESSIONAL

OBJ_BUCH-167-002.book Page 1 Wednesday, October 18, 2006 1:

21 609 929 J96 • 18.10.06

OBJ_BUCH-167-002.book Page 2 Wednesday, October 18, 2006 1

31 609 929 J96 • 18.10.06

OBJ_BUCH-167-002.book Page 3 Wednesday, October 18, 2006

41 609 929 J96 • 18.10.06

DWM 40 L

2 607 001 312

2 605 439 024

OBJ_BUCH-167-002.book Page 4 Wednesday, October 18, 2006 2:01 PM

English | 131 609 929 J96 • 18.10.06

Functional

Description

Optimal working with

the measuring tool is

possible only when

the operating instruc-

tions and information

are read completely, and the

instructions contained therein are

strictly followed. SAVE THESE

INSTRUCTIONS.

Please unfold the fold-out page with

the representation of the measuring

tool and leave it unfolded while reading

the operating instructions.

Product Features

The numbering of the product features

shown refers to the illustration of the

measuring tool on the graphic page.

1Fold-out leg

2Viewing window for display

3Serial number

4Leg extension*

5Joint cover

6Base leg

7Battery lid

8“HOLD”button

9 “ON/OFF” button

10 Display

11 Spirit level for horizontal alignment

12 Spirit level for vertical alignment

13 End cap

14 Contact edge

15 Protective case*

Display Elements

aReading

bBattery indication

c“HOLD”indicator

*The accessories illustrated or

described are not included as standard

delivery.

Intended Use

This precision device is intended for

the measuring and transferring of

angles (horizontal and vertical), e.g., for

interior fabrication, stair construction,

exterior coverings, etc.

OBJ_BUCH-167-002.book Page 13 Wednesday, October 18, 2006

14 | English 1 609 929 J96 • 18.10.06

Technical Data

Digital Angle

Measuring

Device

DWM 40 L

PROFESSIONAL

Article number 0 601 096 603

Digital Angle

Measuring

Device

DWM 40 L Set

PROFESSIONAL

Article number 0 601 096 663

Delivery Scope

– Leg extension

– Protective

case

DWM 40 L/DWM 40 L Set

Measuring range 0° ... 220°

Measuring accu-

racy

–Angle

– Spirit level

±0.1° (1.8 mm/m)

±0.057° (1 mm/m)

Lowest

indication unit 0.1°

Operating

temperature – 10 °C ... +50 °C

Storage

temperature – 20 °C ... +85 °C

Batteries

Rechargeable

batteries

4x1.5 V LR6 (AA)

4x1.2 V KR6 (AA)

Operating life-

time (alkali-man-

ganese batteries)

approx. 100 h

Automatic

switch-off after

approx. 5 min

Leg to leg length 400 mm

Weight accord-

ing to EPTA-Pro-

cedure 01/2003 1.1 kg

Please observe the article number on the

type plate of your measuring tool. The trade

names of the individual measuring tools

may vary.

The measuring tool can be clearly identified

with the serial number 3on the type plate.

OBJ_BUCH-167-002.book Page 14 Wednesday, October 18, 2006

English | 151 609 929 J96 • 18.10.06

Assembly

Inserting/Replacing the

Battery (see figure B)

Use only alkali-manganese or recharge-

able batteries.

To open the battery lid 7, slide the lid in

the direction of the arrow tip and fold it

up. Insert the batteries. Pay attention

that the polarity is correct, according to

the representation on the inside of the

battery lid.

After inserting the batteries and clos-

ing the battery lid 7, the measuring tool

is automatically switched on. For the

checking of the display, all indicator

elements appear for approx. 20 sec-

onds. Afterwards, the current angle is

displayed.

When the battery indicator bappears

in the display for the first time, meas-

urements are still possible for approx.

1–2hours.

When the battery indicator bblinks,

the batteries must be replaced. Meas-

urements are no longer possible.

Always replace all batteries at the

same time. Only use batteries from one

brand and with the identical capacity.

fRemove the batteries from the

measuring tool when not using

it for extended periods. When

storing for extended periods, the

batteries can corrode and dis-

charge themselves.

Attaching the Leg

Extension (see figure A)

Slide the leg extension 4(accessory)

onto the fold-out leg 1from the front

(shown in figure A on the fold-out page),

observing the arrow on the extension.

Extend the leg extension as far as nec-

essary, but not beyond the stop (maxi-

mum position shown in figure A).

OBJ_BUCH-167-002.book Page 15 Wednesday, October 18, 2006

16 | English 1 609 929 J96 • 18.10.06

Operation

Initial Operation

Note: Protect the measuring tool

against moisture and direct sun irradia-

tion.

Switching On and Off

Press the “ON/OFF” switch 9to

switch the measuring tool on or off.

After inserting or replacing the batter-

ies, the measuring tool is automatically

switched on.

After approx. 5 minutes without button

actuation or angle change, the measur-

ing tool switches off automatically to

preserve battery life.

Operating Instructions

Note: Keep the supporting surfaces

and contact edges 14 of the measuring

tool clean. Protect the measuring tool

against impact and shock. Debris par-

ticles or deformation can lead to faulty

measurements.

Measuring Angles (see figure D)

Position the fold-out leg 1and the base

leg 6plane against the edges to be

measured. The displayed reading cor-

responds with the internal angle w

between the base leg and the fold-out

leg.

The reading is indicated on both dis-

plays (on the front and rear side of the

base leg). The reading is indicated until

the legs are moved in relation to each

other.

Retaining the Measured Value

(“HOLD”)

The current reading can be retained in

the display by pressing the “HOLD”

button 8.

When the Hold mode is activated,

“HOLD” cis indicated in the display

and the Hold mode is confirmed by the

blinking of both the hold indicator and

the reading c. The reading remains

unchanged (even when the legs are

moved in relation to each other) until

the “HOLD” button 8is pressed again.

OBJ_BUCH-167-002.book Page 16 Wednesday, October 18, 2006

English | 171 609 929 J96 • 18.10.06

Projecting/Transferring Angles

(see figure D)

Position the measuring tool with the

fold-out leg or with the base leg against

the workpiece. Adjust the required

angle with the other leg and project the

angle onto the workpiece.

When directly projecting a measured

angle onto a workpiece, pay attention

that the fold-out leg and the base leg

are not moved in relation to each other

and that the “HOLD” mode is not

switched on.

Measuring with Leg Extension

(see figure G–J)

The leg extension 4(accessory) ena-

bles the measuring of angles when the

contact surface is shorter than the fold-

out leg 1.

Attach the leg extension 4(see “Attach-

ing the Leg Extension”). Position the

base leg 6and the leg extension plane

against or on the edges to be meas-

ured.

The reading of the angle wbetween

base leg and fold-out leg is indicated in

the display. The required angle v

between base leg and leg extension is

calculated as follows:

v=180°–w

Examples for measuring with leg exten-

sion are shown in figures G to J on the

fold-out page.

Maintenance and

Service

Maintenance and Cleaning

For safe and proper working, always

keep the measuring tool clean.

Do not immerse the measuring tool into

water or other fluids.

Wipe off debris using a moist and soft

cloth. Do not use any cleaning agents

or solvents.

When the measuring tool is exposed to

rain for an extended period, its function

may be impaired. However, after com-

pletely drying off, the measuring tool is

ready for operation. No calibration is

required.

OBJ_BUCH-167-002.book Page 17 Wednesday, October 18, 2006

18 | English 1 609 929 J96 • 18.10.06

If the measuring tool should fail despite

the care taken in manufacturing and

testing procedures, repair should be

carried out by an authorized after-sales

service centre for Bosch power tools.

In all correspondence and spare parts

orders, please always include the

10-digit article number given on the

type plate of the measuring tool.

Spare Parts

Battery lid 7. . . . . . . . . 1 609 203 928

End cap 13 . . . . . . . . . 1 609 203 770

Joint cover 5. . . . . . . . 1 609 203 927

Service and Customer

Assistance

Exploded views and information on

spare parts can be found under:

www.bosch-pt.com

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham-Uxbridge

Middlesex UB 9 5HJ

✆ Service: . +44 (0) 18 95 / 83 87 82

✆ Advice line:

. . . . . . . . . . +44 (0) 18 95 / 83 87 91

Fax:. . . . . . . +44 (0) 18 95 / 83 87 89

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

✆ Service: . . .+353 (0)1 / 4 66 67 00

Fax:. . . . . . . . .+353 (0)1 / 4 66 68 88

Australia and New Zealand

Robert Bosch Australia Pty. Ltd.

RBAU/SPT

1555 Centre Road

P.O. Box 66

3168 Clayton/Victoria

✆ . . . . . . . . +61 (0)1 / 3 00 30 70 44

Fax:. . . . . . . +61 (0)1 / 3 00 30 70 45

www.bosch.com.au

OBJ_BUCH-167-002.book Page 18 Wednesday, October 18, 2006

Andere Handbücher für DWM 40 L PROFESSIONAL

Inhaltsverzeichnis

Andere Bosch Messgerät Handbücher

Bosch

Bosch Tronic 3000T Technisches Dokument

Bosch

Bosch D-tect 120 Professional Bedienungsanleitung

Bosch

Bosch Professional GPL 3 G Bedienungsanleitung

Bosch

Bosch GMS 120 Professional Bedienungsanleitung

Bosch

Bosch GLM 30 Professional Bedienungsanleitung

Bosch

Bosch GLM Professional 250 VF Bedienungsanleitung

Bosch

Bosch PMD 10 Bedienungsanleitung

Bosch

Bosch BEA 150 Einrichtungshandbuch

Bosch

Bosch GLM 100 C Professional Bedienungsanleitung

Bosch

Bosch GRL2000-40HV Bedienungsanleitung

Bosch

Bosch Rexroth VDP 92.1 Bedienungsanleitung

Bosch

Bosch GLM 30 Professional Bedienungsanleitung

Bosch

Bosch Professional GAM 270 MFL Bedienungsanleitung

Bosch

Bosch Intellic EFAS-4.10 Gebrauchsanweisung

Bosch

Bosch GRL Professional 240 HV Betriebsanleitung

Bosch

Bosch Professional GSL 2 Bedienungsanleitung

Bosch

Bosch Professional GLM 50-25 G Bedienungsanleitung

Bosch

Bosch GIM 120 Professional Bedienungsanleitung

Bosch

Bosch PCL 10 Bedienungsanleitung

Bosch

Bosch BEA 810 Benutzerhandbuch

Bosch

Bosch BEA 060 Bedienungsanleitung

Bosch

Bosch Atino Bedienungsanleitung

Bosch

Bosch GAM 270 MFL Montageanleitung

Bosch

Bosch LR 7 Professional Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung