Bosch GLM 30 Bedienungsanleitung

Robert Bosch GmbH

Power Tools Division

70745 Leinfelden-Echterdingen

Germany

www.bosch-pt.com

1 609 92A 0LG (2014.04) I / 354 XXX

GLM 30 Professional

de Originalbetriebsanleitung

en Original instructions

fr Notice originale

es Manual original

pt Manual original

it Istruzioni originali

nl Oorspronkelijke gebruiksaanwijzing

da Original brugsanvisning

sv Bruksanvisning i original

no Original driftsinstruks

fi Alkuperäiset ohjeet

el Πρωτότυπο οδηγιών χρήσης

tr Orijinal işletme talimatı

pl Instrukcja oryginalna

cs Původní návod k používání

sk Pôvodný návod na použitie

hu Eredeti használati utasítás

ru Оригинальное руководство по

эксплуатации

uk Оригінальна інструкція з

експлуатації

kk Пайдалану нұсқаулығының

түпнұсқасы

ro Instrucţiuni originale

bg Оригинална инструкция

mk Оригинално упатство за работа

sr Originalno uputstvo za rad

sl Izvirna navodila

hr Originalne upute za rad

et Algupärane kasutusjuhend

lv Instrukcijas oriģinālvalodā

lt Originali instrukcija

cn 正本使用说明书

tw 原始使用說明書

ko 사용 설명서 원본

ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ

ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ

OBJ_BUCH-2004-004.book Page 1 Monday, April 28, 2014 11:41 AM

1 609 92A 0LG | (28.4.14) Bosch Power Tools

GLM 30

OBJ_BUCH-2004-004.book Page 3 Monday, April 28, 2014 11:36 AM

1 609 92A 0LG | (28.4.14) Bosch Power Tools

1,95 m

0,5 m

OBJ_BUCH-2004-004.book Page 4 Monday, April 28, 2014 11:36 AM

1 609 92A 0LG | (28.4.14) Bosch Power Tools

GLM250 VF

Professional

1 608 M00 05B

2 607 001 391

2 609 160 194

OBJ_BUCH-2004-004.book Page 5 Monday, April 28, 2014 11:36 AM

English | 17

Bosch Power Tools 1 609 92A 0LG | (28.4.14)

English

Safety Notes

All instructions must be read and observed in order to work safely

with the measuring tool. Never make warning signs on the measur-

ing tool unrecognisable. SAVE THESE INSTRUCTIONS FOR FUTURE

REFERENCE AND INCLUDE THEM WITH THE MEASURING TOOL

WHEN GIVING IT TO A THIRD PARTY.

Caution – The use of other operating or adjusting equipment or the applica-

tion of other processing methods than those mentioned here can lead to dan-

gerous radiation exposure.

Themeasuringtoolisprovidedwitha warning label(markedwithnumber

the representation of the measuring tool on the graphics page).

If the text of the warning label is not in your national language, stick the pro-

vided warning label in your national language over it before operating for the

first time.

Do not direct the laser beam at persons or animals and do not

stare into the direct or reflected laser beam yourself, not even

fromadistance.

You could blind somebody, cause accidents or dam-

age your eyes.

If laser radiation strikes your eye, you must deliberately close your eyes and

immediately turn your head away from the beam.

Do not use the laser viewing glasses as safety goggles. The laser viewing glass-

es are used for improved visualisation of the laser beam, but they do not protect

against laser radiation.

Do not use the laser viewing glasses as sun glasses or in traffic. The laser view-

ing glasses do not afford complete UV protection and reduce colour perception.

OBJ_BUCH-2004-004.book Page 17 Monday, April 28, 2014 11:36 AM

18 | English

1 609 92A 0LG | (28.4.14) Bosch Power Tools

Have the measuring tool repaired only through qualified specialists using

original spare parts. This ensures that the safety of the measuring tool is main-

tained.

Do not allow children to use the laser measuring tool without supervision.

They could unintentionally blind other persons or themselves.

Do not operate the measuring tool in explosive environments, such as in the

presence of flammable liquids, gases or dusts. Sparks can be created in the

measuring tool which may ignite the dust or fumes.

Do not make any modifications to the laser equipment.

Product Description and Specifications

Please unfold the fold-out page with the representation of the measuring tool and

leave it unfolded while reading the operating instructions.

Intended Use

The measuring tool is intended for measuring distances, lengths, heights, and clear-

ances. The measuring tool is suitable for measuring indoors.

Technical Data

Digital Laser Measure GLM 30

Article number 3 601 K72 5.. 3 601 K72 57.

Measuring range (typical) 0.15–30 m

0.15–30 m

Measuring range (typical under

unfavourable conditions) 20 m

20 m

Measuring accuracy (typical) ±2.0mm

±2.0mm

Measuring accuracy (typical under

unfavourable conditions) ±3.0mm

±3.0mm

Lowest indication unit 1mm 1mm

Operating temperature –10 °C...+45°C –10 °C...+45°C

Storage temperature –20 °C...+70 °C –20 °C...+70 °C

Relative air humidity, max. 90 % 90 %

Laser class 22

Laser type 635 nm, <1 mW 635 nm, <1 mW

OBJ_BUCH-2004-004.book Page 18 Monday, April 28, 2014 11:36 AM

English | 19

Bosch Power Tools 1 609 92A 0LG | (28.4.14)

Laser beam diameter (at 25 °C)

approx.

–at10mdistance

–at30mdistance 9mm

27 mm

9mm

27 mm

Automatic switch-off after approx.

–Laser

–Measuringtool

(without measurement)

20 s

5min 20 s

5min

Weight according to

EPTA-Procedure 01/2003 0.1 kg 0.1 kg

Dimensions 105 x 41 x 24 mm 105 x 41 x 24 mm

Degree of protection IP 54 (dust and splash

proof)

IP 54 (dust and splash

proof)

Batteries

Rechargeable batteries 2 x 1.5 V LR03 (AAA)

2 x 1.2 V HR03 (AAA) 2 x 1.5 V LR03 (AAA)

2 x 1.2 V HR03 (AAA)

Individual measurement per

battery set 5000 5000

Setting the unit of measure –



Setting the sound



–

A) For measurementsfrom the rear measuring tool edge, weak backlighting and 25 °C operating tem-

perature are applicable for high reflectivity of the target (e.g. a white-painted wall). Inaddition, a devi-

ation influence of ± 0.05 mm/m must be taken into account.

B) For measurements from the rear measuring tool edge, strong backlighting and – 10 °C to +45 °C

operating temperature are applicable for low reflectivity of the target (e.g. a black box). In addition, a

deviation influence of ±0.15 mm/m must be taken into account.

C) At 25 °C operating temperature

D) except battery compartment

The measuring tool can be clearly identifiedwith the serial number

on the type plate.

Digital Laser Measure GLM 30

OBJ_BUCH-2004-004.book Page 19 Monday, April 28, 2014 11:36 AM

20 | English

1 609 92A 0LG | (28.4.14) Bosch Power Tools

Product Features

The numbering of the product features shown refers to the illustration of the

measuring tool on the graphic page.

Display

Measuring button

Battery lid

Latch of battery lid

Serial number

Laser warning label

Reception lens

Laser beam outlet

Laser target plate*

Laser viewing glasses*

Protective pouch*

* The accessories illustrated or described are not included as standard delivery.

Display Elements

Auto-sum

Previous measuring value

Current measuring value

Laser, switched on

Length measurement

Battery low indicator

Temperature warning

Error message

“Error”

Assembly

Inserting/Replacing the Batteries

Using alkali-manganese or rechargeable batteries is recommended for operation of

the measuring tool.

With 1.2-V-rechargeable batteries fewer measurements could be possible than with

1.5-V-batteries.

Toopen the battery lid

,press the latch

and remove the battery lid. Insert thebatteries/

rechargeable batteries. When inserting, pay attention to the correct polarity according

to the representation on the inside of the battery compartment.

OBJ_BUCH-2004-004.book Page 20 Monday, April 28, 2014 11:36 AM

English | 21

Bosch Power Tools 1 609 92A 0LG | (28.4.14)

When the battery symbol appears for the first time on the display, at least 100

individual measurements are still possible.

When the battery symbol flashes, the batteries/rechargeable batteries must be

replaced. Measurements are no longer possible.

Always replace all batteries/rechargeable batteries at the same time. Do not use

different brands or types of batteries/rechargeable batteries together.



Removethebatteries/rechargeable batteriesfromthemeasuringtoolwhennot

usingit for longerperiods.

When storing for longer periods, the batteries/recharge-

able batteries can corrode and self-discharge.

Operation

Initial Operation



Do not leave the switched-on measuring tool unattended and switch the mea-

suring tool off after use.

Other persons could be blinded by the laser beam.

Protect the measuring tool against moisture and direct sun light.



Donotsubjectthemeasuringtooltoextremetemperatures or variations intem-

perature.

As an example, do not leave it in vehicles for a long time. In case of large

variations in temperature, allow the measuring tool to adjust to the ambient temper-

ature before putting it into operation. In case of extreme temperatures or variations

in temperature, the accuracy of the measuring tool can be impaired.

Avoid heavy impact to or falling down of the measuring tool. After severe exte-

rior effects to the measuring tool, it is recommended to carry out an accuracy

check (see “

Accuracy Check of the Distance Measurement

”, page

) each time be-

fore continuing to work.

Switching On and Off

Toswitchonthemeasuringtool,brieflypress the measuringbutton

.Measuringtool

and laser are switched on.



Do not leave the switched-on measuring tool unattended and switch the mea-

suring tool off after use.

Other persons could be blinded by the laser beam.

switch off

the measuring tool, press the measuring button

and hold it down.

Measuring Procedure (see figure A)

Once switched on, the measuring tool is in the length measurement mode.

The rear edge of the measuring tool is always the reference level for the measurement.

Place the measuring tool against the desired starting point of the measurement (e.g.

a wall).

OBJ_BUCH-2004-004.book Page 21 Monday, April 28, 2014 11:36 AM

22 | English

1 609 92A 0LG | (28.4.14) Bosch Power Tools

Briefly press the measuring button

to initiate the measurement. Then the laser beam

is switched off. To switch the laser beam on again, briefly press the measuring button

To initiate a further measurement, briefly press the measuring button

again.

Do not point the laser beam at persons or animals and do not look into the la-

ser beam yourself, not even from a large distance.

Note: The measured value typically appears within 0.5 seconds and no later than

4 seconds. The duration of the measurement depends on the distance, the lighting

conditions and the reflective properties of thetarget surface. Uponcompletion of the

measurement the laser beam is automatically switched off.

Auto-Sum (see figure B)

The auto-sum automatically shows the sum of all individual measurements (e.g. use-

ful for the material calculation).

Theauto-sum value iserasedas soon as the device is switched off or if it automatically

switches off when no button is pressed after 5 minutes.

The auto-sum is not saved. A subsequentcorrection of the auto-sum is not possible.

Aim the laser beam at the target surface.

Briefly press the measuring button

to initiate the measurement.

The current measured value

appears in the bottom line of the dis-

play. The laser beam is switched off.

To switch on the laser beam, briefly press the measuring button

again. The current measured value

is displayed in the bottom line.

Thepreviousmeasuredvalue

is displayed in the middle line. In the

top line, the auto-sum

(the sum of the current and previous meas-

ured value) is displayed.

Switching the Sound On and Off (3 601 K72 5..)

Switch the measuring tool off.

Pressandholdthemeasuringbutton

.When the cursor

is on the desired setting, release the measuring button

. After releasing, the measuring tool switches itself on

with the selected setting.

OBJ_BUCH-2004-004.book Page 22 Monday, April 28, 2014 11:36 AM

Andere Handbücher für GLM 30

Inhaltsverzeichnis

Andere Bosch Messgerät Handbücher

Bosch

Bosch Rexroth VDP 92.1 Bedienungsanleitung

Bosch

Bosch LR 6 Professional Bedienungsanleitung

Bosch

Bosch Intellic EFAS-4.10 Gebrauchsanweisung

Bosch

Bosch PLR 50 Bedienungsanleitung

Bosch

Bosch GSL 2 Bedienungsanleitung

Bosch

Bosch 13.5159.0060 Bedienungsanleitung

Bosch

Bosch GLM 40 Professional Bedienungsanleitung

Bosch

Bosch FAA-420-RI-ROW Bedienungsanleitung

Bosch

Bosch LR 2 Professional Bedienungsanleitung

Bosch

Bosch GLM 150 C Professional Bedienungsanleitung

Bosch

Bosch FSA 500 Bedienungsanleitung

Bosch

Bosch Professional LR 60 Bedienungsanleitung

Bosch

Bosch GLM 250 VF Professional Bedienungsanleitung

Bosch

Bosch GLM 40 Professional Bedienungsanleitung

Bosch

Bosch GPL100-30G Montageanleitung

Bosch

Bosch GLL 2-10 Professional Bedienungsanleitung

Bosch

Bosch Professional GLM 50-23 G Bedienungsanleitung

Bosch

Bosch GLM 500 Professional Bedienungsanleitung

Bosch

Bosch GRL4000-80CH Montageanleitung

Bosch

Bosch BEA 060 Bedienungsanleitung

Bosch

Bosch GLM Professional 100-25 C Bedienungsanleitung

Bosch

Bosch PHANTOM EDGE Bedienungsanleitung

Bosch

Bosch GIM 60 Professional Bedienungsanleitung

Bosch

Bosch GLM 20 Montageanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung