Bosch VIP-X1XF Bedienungsanleitung

VIP X1 XF

VIP-X1XF | VIP-X1XF-E

en Installation and Operating Manual

VIP X1 XF Table of Contents | en 3

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.54 | 2011.09

Table of Contents

1Preface 6

1.1 About this manual 6

1.2 Conventions in this manual 6

1.3 Intended use 6

1.4 EU Directives 7

1.5 Rating plate 7

2 Safety information 8

2.1 Electric shock hazard 8

2.2 Installation and operation 8

2.3 Maintenance and repair 8

3 Product description 9

3.1 Scope of delivery 9

3.2 System requirements 10

3.3 Overview of functions 11

3.4 Connections, controls and displays 14

4 Installation 16

4.1 Preparations 16

4.2 Mounting 17

4.3 Connections 18

4.4 Power on/Power off 20

4.5 Setup using Bosch Video Client 20

5 Configuration using a Web browser 22

5.1 Connecting 22

5.2 Configuration menu 24

5.3 Basic Mode: Device Access 26

5.4 Basic Mode: Date/Time 28

5.5 Basic Mode: Network 29

5.6 Basic Mode: Encoder 30

5.7 Basic Mode: Audio 31

5.8 Basic Mode: Recording 32

5.9 Basic Mode: System Overview 32

5.10 Advanced Mode: Identification 33

5.11 Advanced Mode: Password 35

5.12 Advanced Mode: Date/Time 36

5.13 Advanced Mode: Display Stamping 38

5.14 Advanced Mode: Appearance 40

5.15 Advanced Mode: LIVEPAGE Functions 41

5.16 Advanced Mode: Logging 43

5.17 Advanced Mode: Video Input 44

5.18 Advanced Mode: Picture Settings 45

5.19 Advanced Mode: Encoder Profile 47

4en | Table of Contents VIP X1 XF

DOC | V4.54 | 2011.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

5.20 Advanced Mode: Encoder Streams 50

5.21 Advanced Mode: Audio 52

5.22 Advanced Mode: Storage Management 53

5.23 Advanced Mode: Recording Profiles 55

5.24 Advanced Mode: Retention Time 58

5.25 Advanced Mode: Recording Scheduler 58

5.26 Advanced Mode: Recording Status 60

5.27 Advanced Mode: Alarm Connections 61

5.28 Advanced Mode: VCA 64

5.29 Advanced Mode: VCA profiles 65

5.30 Advanced Mode: VCA Scheduled 70

5.31 Advanced Mode: VCA Event triggered 72

5.32 Advanced Mode: Audio Alarm 73

5.33 Advanced Mode: Alarm E-Mail 75

5.34 Advanced Mode: Alarm Task Editor 77

5.35 Advanced Mode: Alarm Inputs 78

5.36 Advanced Mode: Relay 78

5.37 Advanced Mode: COM1 80

5.38 Advanced Mode: Network 82

5.39 Advanced Mode: Advanced 86

5.40 Advanced Mode: Multicast 88

5.41 Advanced Mode: FTP Posting 89

5.42 Advanced Mode: Encryption 90

5.43 Advanced Mode: Maintenance 90

5.44 Advanced Mode: Licenses 92

5.45 Advanced Mode: System Overview 93

5.46 Function test 94

6Operation 95

6.1 Operation with Microsoft Internet Explorer 95

6.2 The LIVEPAGE 97

6.3 Saving snapshots 101

6.4 Recording video sequences 101

6.5 Running recording program 101

6.6 Processor load 101

6.7 Network connection 102

6.8 The RECORDINGS page 103

6.9 Hardware connections between video servers 106

6.10 Operation using software decoders 108

7 Maintenance and upgrades 109

7.1 Testing the network connection 109

7.2 Unit reset 109

7.3 Repairs 110

7.4 Transfer and disposal 110

8 Appendix 111

8.1 Troubleshooting 111

8.2 General malfunctions 112

VIP X1 XF Table of Contents | en 5

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.54 | 2011.09

8.3 Malfunctions with iSCSI connections 114

8.4 LEDs 115

8.5 Processor load 116

8.6 Network connection 116

8.7 Serial interface 116

8.8 Terminal block 117

8.9 Communication with terminal program 118

8.10 Copyrights 120

9 Specifications 121

9.1 Standard version 121

9.2 Eco-version 122

Glossary 124

Index 128

6en | Preface VIP X1 XF

DOC | V4.54 | 2011.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

1Preface

1.1 About this manual

This manual is intended for persons responsible for the installation and operation of the

VIP X1 XF. VIP X1 XF is available as standard or Eco-version. International, national and any

regional electrical engineering regulations must be followed at all times. Relevant knowledge

of network technology is required. The manual describes the installation and operation of the

unit.

1.2 Conventions in this manual

In this manual, the following symbols and notations are used to draw attention to special

situations:

1.3 Intended use

The VIP X1 XF network video server transfers video, audio and control signals over data

networks (Ethernet LAN, Internet). There are various memory options for recording the

images captured by the connected camera. The unit is intended for use with CCTV systems.

Various functions can be triggered automatically by incorporating external alarm sensors.

Other applications are not permitted.

In the event of questions concerning the use of the unit which are not answered in this

manual, please contact your sales partner or:

Bosch Sicherheitssysteme GmbH

Werner-von-Siemens-Ring 10

85630 Grasbrunn

Germany

www.boschsecurity.com

CAUTION!

This symbol indicates that failure to follow the safety instructions described may endanger

persons and cause damage to the unit or other equipment.

It is associated with immediate, direct hazards.

NOTICE!

This symbol refers to features and indicates tips and information for easier, more convenient

use of the unit.

VIP X1 XF Preface | en 7

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.54 | 2011.09

1.4 EU Directives

The VIP X1 XF network video server complies with the requirements of EU Directives 89/336

(Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).

1.5 Rating plate

For exact identification, the model name and serial number are inscribed on the bottom of the

housing. Please make a note of this information before installation, if necessary, so as to have

it to hand in case of questions or when ordering spare parts.

8en | Safety information VIP X1 XF

DOC | V4.54 | 2011.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

2 Safety information

2.1 Electric shock hazard

– Never attempt to connect the unit to any power network other than the type for which it

is intended.

– Use only power supply units with UL approval and a power output according to LPS or

NEC Class 2.

– Never open the housing.

– Never open the housing of the power supply unit.

– If a fault occurs, disconnect the power supply unit from the power supply and from all

other units.

– Install the power supply and the unit only in a dry, weather-protected location.

– If safe operation of the unit cannot be ensured, remove it from service and secure it to

prevent unauthorized operation. In such cases, have the unit checked by Bosch Security

Systems.

Safe operation is no longer possible in the following cases:

– if there is visible damage to the unit or power cables,

– if the unit no longer operates correctly,

– if the unit has been exposed to rain or moisture,

– if foreign bodies have penetrated the unit,

– after long storage under adverse conditions, or

– after exposure to extreme stress in transit.

2.2 Installation and operation

– The relevant electrical engineering regulations and guidelines must be complied with at

all times during installation.

– Relevant knowledge of network technology is required to install the unit.

– Before installing or operating the unit, make sure you have read and understood the

documentation for the other equipment connected to it, such as cameras. The

documentation contains important safety instructions and information about permitted

uses.

– Perform only the installation and operation steps described in this manual. Any other

actions may lead to personal injury, damage to property or damage to the equipment.

2.3 Maintenance and repair

– Never open the housing of the VIP X1 XF. The unit does not contain any user-serviceable

parts.

– Never open the housing of the power supply unit. The power supply unit does not contain

any user-serviceable parts.

– Ensure that all maintenance or repair work is carried out only by qualified personnel

(electrical engineers or network technology specialists).

VIP X1 XF Product description | en 9

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.54 | 2011.09

3 Product description

3.1 Scope of delivery

– Standard or Eco-version of VIP X1 XF network video server

– Standard version: 2 terminal blocks

Eco-version: 1 terminal block

– 4 self-adhesive elastic bumpers

– 1 wall-mounting panel

–2screws

– 2 wall plugs

– 1 Quick Installation Guide

– Product CD with the following content:

– Quick Installation Guide

–Manual

– System Requirements document

– Further documentation on Bosch Security Systems products

– Bosch Video Client including the Configuration Manager application

–MPEGActiveXcontrol

– DirectX control

– Sun JVM

– Adobe Acrobat Reader

NOTICE!

Check that the delivery is complete and in perfect condition. Arrange for the unit to be

checked by Bosch Security Systems if you find any damage.

10 en | Product description VIP X1 XF

DOC | V4.54 | 2011.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

3.2 System requirements

General requirements

– Computer with Windows XP or Windows 7 operating system

– Network access (Intranet or Internet)

– Screen resolution at least 1,024 × 768 pixels

– 16- or 32-bit color depth

– Installed Sun JVM

Additional configuration requirements

– Microsoft Internet Explorer (version 7.0 or higher)

– Installed Configuration Manager application (version 4.21 or higher)

Additional operational requirements

– Microsoft Internet Explorer (version 7.0 or higher)

– Receiver software, for example Bosch Video Client (version 1.1 or higher) or Bosch Video

Management System (version 3.0 or higher)

– H.264 compatible hardware decoder from Bosch Security Systems (for example

VIP XD HD) as a receiver and connected video monitor

– For playing back recordings: connection to storage medium

NOTICE!

Also note the information in the System Requirements document on the product CD

supplied. If necessary, you can install the required programs and controls from the product

CD supplied (see Section 3.1 Scope of delivery, page 9).

The Web browser must be configured to enable Cookies to be set from the IP address of the

unit.

In Windows 7, deactivate protected mode on the Security tab under Internet Options.

You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.

Andere Handbücher für VIP-X1XF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Netzwerk-Hardware Handbücher

Bosch

Bosch Rexroth IndraControl S67-S3-BK-DI8-M8 Benutzerhandbuch

Bosch

Bosch VIP X1 Bedienungsanleitung

Bosch

Bosch VIP X1600 Module Bedienungsanleitung

Bosch

Bosch D9210C Fehlerbehebungshandbuch

Bosch

Bosch VIP-X1XF Bedienungsanleitung

Bosch

Bosch DLA-AIOL1 Bedienungsanleitung

Bosch

Bosch VIPX1A Bedienungsanleitung

Bosch

Bosch VIP XD Bedienungsanleitung

Bosch

Bosch wLSN Bedienungsanleitung

Bosch

Bosch DVRXEAP01 Bedienungsanleitung

Bosch

Bosch VIP X1600 Module Bedienungsanleitung

Bosch

Bosch DIVAR IP 6000 1U Bedienungsanleitung

Bosch

Bosch Rexroth IndraControl XFE01.1-SY-01 Bedienungsanleitung

Bosch

Bosch VIP-X1XF-E Bedienungsanleitung

Bosch

Bosch DIVAR IP all-in-one 7000 Series Bedienungsanleitung

Bosch

Bosch LTC 4600 Series Bedienungsanleitung

Bosch

Bosch RTS RVON+ Bedienungsanleitung

Bosch

Bosch Rexroth NK350 Bedienungsanleitung

Bosch

Bosch VIP X1600 M4S Bedienungsanleitung

Bosch

Bosch DX4020-EXP Bedienungsanleitung

Bosch

Bosch VideoJet X10/X20/X40 Bedienungsanleitung

Bosch

Bosch VIP X1 Bedienungsanleitung

Bosch

Bosch VideoJet X10 Bedienungsanleitung

Bosch

Bosch VIP X1 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung