Bosch NDA-FMT200-DOME Bedienungsanleitung

IP200 MiniDome In-Ceiling Mount

NDA-FMT200-DOME

en Installation Manual

IP200 MiniDome In-Ceiling Mount Table of Contents | en 3

Bosch Security Systems Installation Manual AM18-Q0626 | v1.0 | 2012.09

Table of Contents

1Safety 4

1.1 Safety precautions 4

2 Unpacking 5

2.1 Parts List 5

3 Installation Overview 6

4 Installing a Recessed Mount 7

4.1 Overview 7

4.2 Installing the Recessed Mount 7

4.3 Installing the Camera to the Recess Mount 11

5 Connection 14

4en | Safety IP200 MiniDome In-Ceiling Mount

AM18-Q0626 | v1.0 | 2012.09 Installation Manual Bosch Security Systems

1Safety

Before installing and operating the camera, please read this

manual carefully.

1.1 Safety precautions

This manual is the intellectual property of Bosch Security

Contact: www.boschsecurity.com

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

NOTICE!

This symbol indicates information or a company policy that

relates directly or indirectly to the safety of personnel or

protection of property.

IP200 MiniDome In-Ceiling Mount Unpacking | en 5

Bosch Security Systems Installation Manual AM18-Q0626 | v1.0 | 2012.09

2 Unpacking

This equipment should be unpacked and handled with care. If

an item appears to have been damaged in shipment, notify the

shipper immediately.

Verify that all the parts listed in the applicable Parts List below

are included. If any items are missing, notify your Bosch

Security Systems Sales or Customer Service Representative.

The original packing carton is the safest container in which to

transport the unit and must be used if returning the unit for

service. Save it for possible future use.

2.1 Parts List

The following table lists the parts included in the In-ceiling

(recessed) mount (NDA-FMT200-DOME):

Quantity Part

1 In-ceiling mount: NDA-FMT200-DOME

1 White trim ring A (inner diameter: 102 mm)

with two M3 captive screws

1 White trim ring B (inner diameter: 98 mm) with

two M3 captive screws

4 Four M4 x 6 mm screws

4 Four M4 x 15 mm screws

1 Security Torx T-10 L wrench

1 Installation manual (this booklet)

6en | Installation Overview IP200 MiniDome In-Ceiling Mount

AM18-Q0626 | v1.0 | 2012.09 Installation Manual Bosch Security Systems

3 Installation Overview

The IP200 MiniDome camera comes with the hardware and

installation instructions necessary to mount the camera to a

concrete ceiling.

This following mounting accessory is available :

– In-ceiling mount, used in applications where the camera is

mounted into a recessed ceiling.

The mount is supplied with two different trim rings and

different tooling hole positions on the sides of the recess

mount. Use the table below to choose the ring and hole

position for your camera.

The installation should be made by qualified installation

personnel and conform to the National Electrical Code and

applicable local codes.

Trim ring Hole Camera

Ring A A NDN-265-PIO

Ring B B NDC-225-P

NDC-225-PI

NDC-255-P

NDC-265-P

IP200 MiniDome In-Ceiling Mount Installing a Recessed Mount | en 7

Bosch Security Systems Installation Manual AM18-Q0626 | v1.0 | 2012.09

4 Installing a Recessed Mount

4.1 Overview

This chapter details how to install a recessed mount for the

IP200 MiniDome.

4.2 Installing the Recessed Mount

To mount to a recess mount, do the following:

1. Determine a secure location for the recessed mount.

Figure 4.1 Recess Mount Dimensions

NOTICE!

The image sensors in modern cameras are highly sensitive and

require special care for proper performance and extended

lifetime. Follow the guidelines for optimum results with your

camera:

– Do not expose to direct sunlight or bright spotlights in

operating and nonoperating conditions.

– Avoid bright lights in the field of view of the camera. Bright

lights cause a “smearing” effect, which is visible as white

lines above and below the highlight. Prolonged exposure to

bright lights may cause bleaching of the sensor's color

filters. This will be visible as colored spots in the picture

and is irreversible.

96 (3.78)

194 (7.64)

55.1 (2.17)

8en | Installing a Recessed Mount IP200 MiniDome In-Ceiling Mount

AM18-Q0626 | v1.0 | 2012.09 Installation Manual Bosch Security Systems

2. Drill or cut a 7 in. hole with a tolerance of +/- 1/8 in.

(177.8 mm +/- 2.2 mm).

3. Optional: if installing the camera to a suspended ceiling

tile or any other surface where additional support is

required, the LTC 9349MK mounting kit (sold separately)

is recommended. See the instruction book supplied with

the mounting bracket for installation instructions.

Figure 4.2 Mounting bracket

4. Align holes of mounting plate (supplied with dome) with

mounting bracket and attach with screws. Ensure that

both the crescent shape of the mounting plate and the

crescent shape of the mounting bracket are aligned.

5. Ensure that the clamping plates are angled inward by

pushing up and into the two slots.

6. Insert mount through the hole and into the ceiling. Slide

clamps out and down so that the drywall is clamped in

between the clamps and the bracket flange, 41.7 mm

(1.64 in.) maximum ceiling thickness and 9.7 mm (0.38 in.)

minimum ceiling thickness).

IP200 MiniDome In-Ceiling Mount Installing a Recessed Mount | en 9

Bosch Security Systems Installation Manual AM18-Q0626 | v1.0 | 2012.09

Figure 4.3 Attach Recess Mount to Ceiling

Figure 4.4 Attach Recess Mount to Ceiling

7. Tighten both clamps to the ceiling using supplied screws

and a #2 Phillips screwdriver.

10 en | Installing a Recessed Mount IP200 MiniDome In-Ceiling Mount

AM18-Q0626 | v1.0 | 2012.09 Installation Manual Bosch Security Systems

Figure 4.5 Tighten Mounting Clamps

NOTICE!

Over torquing the ceiling clamps can damage the clamp or

ceiling. Only tighten the clamp until it contacts the ceiling and

you start to feel some resistance. If using a power screwdriver,

set the torque level to the lowest setting.

Inhaltsverzeichnis

Andere Bosch Rack & Stand Handbücher

Bosch

Bosch GTA 600 Professional Betriebsanleitung

Bosch

Bosch AutoDome Bedienungsanleitung

Bosch

Bosch GTA 600 Professional Bedienungsanleitung

Bosch

Bosch BDS3210 Bedienungsanleitung

Bosch

Bosch GTA 3700 Bedienungsanleitung

Bosch

Bosch GTA 2500 W Professional Bedienungsanleitung

Bosch

Bosch UMM-LW-20B Installationsanleitung

Bosch

Bosch GTA570 Montageanleitung

Bosch

Bosch ISN-GMX-W0 Bedienungsanleitung

Bosch

Bosch MSS 300 Kurzanleitung

Bosch

Bosch PTA 2400 Bedienungsanleitung

Bosch

Bosch T10031 Bedienungsanleitung

Bosch

Bosch TS2000 Montageanleitung

Bosch

Bosch GTA 2600 Professional Bedienungsanleitung

Bosch

Bosch GTA 2500 W Professional Bedienungsanleitung

Bosch

Bosch FRK 0019 A Bedienungsanleitung

Bosch

Bosch RM 10 Kurzanleitung

Bosch

Bosch GTA 2600 Professional Bedienungsanleitung

Bosch

Bosch TS1017 Bedienungsanleitung

Bosch

Bosch T4B Montageanleitung

Bosch

Bosch TS1015 Bedienungsanleitung

Bosch

Bosch D55 Bedienungsanleitung

Bosch

Bosch VG4-A-9543 Bedienungsanleitung

Bosch

Bosch FLEXIDOME NDA-FMT-MICDOME Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung