Bosch VG4-A-9543 Bedienungsanleitung

AutoDome Pipe Mount

VG4-A-9543

en Installation Guide

AutoDome Pipe Mount Table of Contents | en 3

Bosch Security Systems, Inc. Installation Guide F.01U.251.410 | 1.0 | 2011.08

Table of Contents

1 Important safety instructions 5

2 Installing the Pipe Mount 7

2.1 Unpacking 7

2.1.1 Parts List 7

2.1.2 Optional Mounting Accessories 7

2.1.3 Optional Power Supplies 8

2.1.4 Description 8

2.1.5 Tools Required 8

2.2 Pre-installation Check List 9

2.3 Pressurized Environmental Mounting Option 11

2.4 Mount Power Supply Box 12

2.4.1 Attach Cover Door 14

2.5 Route Wires and Attach Connectors 15

2.5.1 Methods for Routing Wires 16

2.5.2 Wiring the Power Supply Box 18

2.5.3 Power Supply Box Connections 19

2.6 Installing the VG4-A-9543 Pipe Mount 21

2.7 Wire the Pipe Interface Board 23

2.7.1 Wiring for Multiple AutoDomes 25

2.7.2 Connecting Wires to the Pipe Interface Board 25

2.8 Attach Pendant to Pipe and Tighten 29

3 Cable and Wire Standards 31

3.1 Power 31

3.2 Wire Distance Guide 31

3.3 Video and Control Cables 32

3.3.1 Using Coaxial Cable to Transmit Video and Control 32

3.3.2 Using UTP to Transmit Video and Control 33

3.3.3 Using Ethernet to Transmit Video and Control 34

3.3.4 Using Multi-mode Fiber Optic to Transmit Video and Control 34

3.3.5 Using a Fiber Optic Ethernet Media Converter to Transmit Video

and Control 35

3.4 Control-only Cables 35

3.4.1 Controlling the AutoDome via Biphase 35

4en | Table of Contents AutoDome Pipe Mount

F.01U.251.410 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc.

3.4.2 Controlling the AutoDome via the RS232 Protocol 37

3.4.3 Controlling the AutoDome via the RS485 Protocol 39

3.5 Fiber Optic Module with an RS232/RS422 Controller 41

3.5.1 Connecting to an LTC 4629 Head End Data/Video Transceiver 41

3.5.2 Configuring the VG5 AutoDome 41

3.6 Audio Cables 43

4 Alarms and Relay Connections 45

4.1 Alarm Inputs 45

4.2 Configuring Supervised Alarms (inputs 1 and 2) 45

4.2.1 Configuring a Normally Open Supervised Alarm 46

4.2.2 Configuring a Normally Closed Supervised Alarm 46

4.3 Configuring Non-supervised Alarms (inputs 1 through 7) 47

4.3.1 Configuring a Normally Open Non-supervised Alarm 47

4.3.2 Configuring a Normally Closed Non-supervised Alarm 48

4.4 Alarm Outputs 48

4.4.1 Configuring a Dry Contact Relay 48

4.4.2 Configuring an Open Collector Output 49

AutoDome Pipe Mount Important safety instructions | en 5

Bosch Security Systems, Inc. Installation Guide F.01U.251.410 | 1.0 | 2011.08

1 Important safety instructions

Type numbers:

Read, follow, and retain all of the following safety instructions.

Heed all warnings on the unit and in the operating instructions

before operation.

1. Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

2. Do not install unit near any heat sources such as radiators,

heaters, stoves, or other equipment (including amplifiers)

that produce heat.

3. Do not block any ventilation openings.

4. Do not use the unit near water or expose to rain or

moisture. Never spill liquid of any kind on the unit.

5. Unplug the unit during lightning storms or when unused for

long periods. Take precautions to protect the unit from

power and lightning surges.

6. Adjust only those controls specified in the operating

instructions.

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as “Dangerous Voltage” inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

if not avoided, this could result in property damage or risk of

damage to the unit.

6en | Important safety instructions AutoDome Pipe Mount

F.01U.251.410 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc.

7. Do not overload outlets and extension cords, as this can

cause fire or electrical shock.

8. Protect the plug and power cord from foot traffic or

pinching, at electrical outlets, and at its exit from the unit.

9. Operate the unit only from the type of power source

indicated on the label.

10. Unless qualified, do not attempt to service a damaged unit

yourself. Refer all servicing to qualified service personnel.

11. Use only replacement parts specified by the manufacturer.

12. Install in accordance with the manufacturer's instructions

in accordance with applicable local codes.

13. Use only attachments/accessories specified by the

manufacturer. Equipment change or modification could

void the user's guarantee or authorization agreement.

You can view and print the full version of this Installation

Manual with Adobe Acrobat Reader, both provided on the

enclosed CD-ROM. This user guide is the intellectual property

of Bosch Security Systems; protected by copyright. Contact:

www.boschsecurity.com

AutoDome Pipe Mount Installing the Pipe Mount | en 7

Bosch Security Systems, Inc. Installation Guide F.01U.251.410 | 1.0 | 2011.08

2 Installing the Pipe Mount

2.1 Unpacking

This equipment should be unpacked and handled with care. If

an item appears to have been damaged in shipment, notify the

shipper immediately.

Verify that all the parts listed in the product's Parts List below

are included. If any items are missing, notify your Bosch

Security Systems Sales or Customer Service Representative.

The original packing carton is the safest container in which to

transport the unit and must be used if returning the unit for

service. Save it for possible future use.

2.1.1 Parts List

The following table lists the parts included with this mounting

package.

2.1.2 Optional Mounting Accessories

The following table lists the optional parts you may need for

attaching a pendant to a pipe mount.

Part Numbers

Pipe Mount VG4-A-9543

Mounting Options Part Numbers

Pipe Mount for Pressurized

Environmental Housing

VG4-A-9543N

Roof Parapet Mount VGA-ROOF-MOUNT

Flat Roof Mount Adapter LTC 9230/01

8en | Installing the Pipe Mount AutoDome Pipe Mount

F.01U.251.410 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc.

2.1.3 Optional Power Supplies

The pipe mount does not come with an attached power supply.

The following table lists the optional power supplies that are

compatible with VG5 Series AutoDomes:

2.1.4 Description

This chapter details how to install an AutoDome pipe mount.

Any variations to the installation procedures are noted.

Note: You may need to purchase additional mounting

accessories for roof mount applications. Refer to

Section 2.1.2 Optional Mounting Accessories, page 7.

2.1.5 Tools Required

– 5 mm Allen wrench (supplied)

– Small straight blade screwdrivers ~ 2.5 mm (0.1 in.) – 3.1

mm (1/8 in.)

– Medium straight blade screwdriver

– No. 1 and No. 2 Phillips screwdrivers

– Socket wrench and 9/16 in. socket

– Pipe Wrench

Mounting Options Part Numbers

24 VAC (no transformer), NEMA-rated with

cover

VG4-A-PSU0

120 VAC transformer, NEMA-rated with cover VG4-A-PSU1

230 VAC transformer, NEMA-rated with cover VG4-A-PSU2

AutoDome Pipe Mount Installing the Pipe Mount | en 9

Bosch Security Systems, Inc. Installation Guide F.01U.251.410 | 1.0 | 2011.08

2.2 Pre-installation Check List

1. Determine the location and distance for the power supply

box based on its voltage and current consumption. Refer

to Section 3 Cable and Wire Standards, page 31 for wiring

information and distances.

2. Use only UL listed liquid tight strain reliefs for conduits to

the Power Supply Box to ensure that water cannot enter

the box. You must use water tight conduits and fittings to

meet NEMA 4 standards.

3. Install all rough wiring including: power, control, video

coax, alarms I/O, relay I/O, and fiber optic cabling. Refer to

Section 3 Cable and Wire Standards, page 31 for video and

control protocol methods.

4. Analog AutoDome: If you plan to use the RS232 or RS485

protocol to control the AutoDome, refer to

Section 3.4.2 Controlling the AutoDome via the RS232

Protocol, page 37, or Section 3.4.3 Controlling the

AutoDome via the RS485 Protocol, page 39, for instructions

on configuring the AutoDome to accept these protocols.

NOTICE!

Power and I/O cabling must be routed separately inside

different permanently earthed metal conduits.

WARNING!

External interconnecting cables are to be installed in

accordance to NEC, ANSI/NFPA70 (for US application) and

Canadian Electrical Code, Part I, CSA C22.1 (for CAN

application) and in accordance to local country codes for all

other countries.

Branch circuit protection incorporating a 20 A, 2-pole Listed

Circuit Breaker or Branch Rated Fuses are required as part of

the building installation. A readily accessible 2-pole disconnect

device with a contact separation of at least 3 mm must be

incorporated.

10 en | Installing the Pipe Mount AutoDome Pipe Mount

F.01U.251.410 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc.

5. Choose the appropriate VG5 AutoDome model (indoor or

outdoor) for the environment in which it will be used.

6. Purchase the appropriate mounting hardware to use,

depending on the location of the AutoDome and the

application.

CAUTION!

Select a rigid mounting location to prevent excessive vibration

to the AutoDome camera.

Inhaltsverzeichnis

Andere Bosch Rack & Stand Handbücher

Bosch

Bosch GTA 2500 W Professional Bedienungsanleitung

Bosch

Bosch FRK 0019 A Bedienungsanleitung

Bosch

Bosch MSS 300 Kurzanleitung

Bosch

Bosch Professional GTA 560 Bedienungsanleitung

Bosch

Bosch Security Systems TC9217MM-W Bedienungsanleitung

Bosch

Bosch HMP 0001 A Bedienungsanleitung

Bosch

Bosch GTA 3800 Professional Montageanleitung

Bosch

Bosch LTC 9349MK Bedienungsanleitung

Bosch

Bosch VDA-WMT-AODome Bedienungsanleitung

Bosch

Bosch GTA 600 Professional Bedienungsanleitung

Bosch

Bosch HMP 0002 A Bedienungsanleitung

Bosch

Bosch GTA 600 Professional Bedienungsanleitung

Bosch

Bosch BDS3210 Bedienungsanleitung

Bosch

Bosch GTA 60 W Professional Bedienungsanleitung

Bosch

Bosch GCR 350 Bedienungsanleitung

Bosch

Bosch 303-435 Bedienungsanleitung

Bosch

Bosch BDS3210 Bedienungsanleitung

Bosch

Bosch B12 Bedienungsanleitung

Bosch

Bosch TS1014 Bedienungsanleitung

Bosch

Bosch BDS3210 Bedienungsanleitung

Bosch

Bosch RA1165 Montageanleitung

Bosch

Bosch FPM-5000-KMC Bedienungsanleitung

Bosch

Bosch NDA-FMT200-DOME Bedienungsanleitung

Bosch

Bosch T4B Montageanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung