Bosch DIVAR IP all-in-one 6000 Bedienungsanleitung

DIVAR IP all‑in‑one 6000

DIP‑6440IG‑00N | DIP‑6444IG‑4HD | DIP‑6448IG‑4HD |

DIP‑644IIG‑4HD

en Installation manual

DIVAR IP all-in-one 6000 Table of contents | en 3

Bosch Security Systems B.V. Installation manual 2022-10 | V02 | F.01U.407.903

Table of contents

1Safety 5

1.1 Safety message explanation 5

1.2 Installation precautions 5

1.3 Electrical safety precautions 6

1.4 ESD precautions 8

1.5 Operating precautions 8

1.6 Service and maintenance precautions 9

1.6.1 Cleaning 10

1.7 Cybersecurity precautions 10

1.8 FCC compliance 11

1.9 Software precautions 11

1.9.1 Use latest software 11

1.9.2 OSS information 11

2Introduction 13

2.1 Parts included 13

2.2 Product registration 13

3System overview 15

3.1 Device views 16

3.2 Control panel elements 16

3.3 Hard drive tray LEDs 17

3.4 LAN, IPMI and UID LEDs 18

4Preparing for installation 19

4.1 Choosing the installation location 19

4.2 Rack precautions 19

4.3 General system precautions 19

4.4 Installation considerations 20

5Rack installation 21

5.1 Installing the inner rail extensions on the chassis 21

5.2 Installing the outer rails to the rack 22

5.2.1 Preparing the outer rails for installation to the rack 22

5.2.2 Installing the outer rails in a square-hole rack 23

5.2.3 Installing the outer rails in a round-hole threaded rack 24

5.2.4 Installing the outer rails in a round-hole rack 25

5.3 Installing the chassis in the rack 26

6Installing a SATA hard drive 28

6.1 Installing a Bosch-supplied hard drive 28

6.2 Installing a non-Bosch-supplied hard drive 30

7Turning on the unit 33

8System setup 34

8.1 Default settings 34

8.2 Prerequisites 34

8.3 Operation modes 34

8.4 First sign-in and initial system setup 35

8.4.1 Choosing operation mode BVMS 36

8.4.2 Choosing operation mode VRM 37

8.4.3 Choosing operation mode iSCSI storage 37

8.5 Signing in to the administrator account 38

8.6 Configuring new hard drives 38

4en | Table of contents DIVAR IP all-in-one 6000

2022-10 | V02 | F.01U.407.903 Installation manual Bosch Security Systems B.V.

8.6.1 Configuring RAID5 38

8.6.2 Recovering the unit 39

8.7 Configuring IPMI settings 40

9Troubleshooting 41

10 Service and repair 42

11 Decommissioning and disposal 43

12 Additional information 44

12.1 Additional documentation and client software 44

12.2 Support services and Bosch Academy 44

DIVAR IP all-in-one 6000 Safety | en 5

Bosch Security Systems B.V. Installation manual 2022-10 | V02 | F.01U.407.903

1 Safety

Read, follow, and retain for future reference all of the following safety instructions.

1.1 Safety message explanation

Warning!

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Caution!

Indicates a hazardous situation which, if not avoided, could result in minor or moderate

injury.

Notice!

Indicates a situation which, if not avoided, could result in damage to the equipment, to the

environment, or to data loss.

1.2 Installation precautions

Notice!

Installation must only be carried out by authorized specialist personnel.

Notice!

The installation of this product must comply with all requirements of the applicable local

code.

Notice!

Install this product only in a dry, weather-protected location.

Notice!

Do not install the device near any heat sources, such as radiators, heaters, stoves, or other

equipment which produces heat.

Notice!

Install this product according to the instructions of the manufacturer.

Notice!

Accessories

Use only accessories recommended by the manufacturer. Do not use accessories that are not

recommended by the manufacturer, as they may cause hazards.

6en | Safety DIVAR IP all-in-one 6000

2022-10 | V02 | F.01U.407.903 Installation manual Bosch Security Systems B.V.

Notice!

If you install this device in an enclosure, make sure that the enclosure is adequately ventilated

according to the manufacturer’s instructions.

Caution!

Installation precaution

Do not place this device on an unstable stand, tripod, bracket, or mount. The device may fall,

causing serious injury to persons and damage to the device. Mount the device according to

the instructions of the manufacturer.

1.3 Electrical safety precautions

Warning!

Fire or electrical shock

Do not expose this device to rain or moisture to reduce the risk of fire or electrical shock.

Warning!

Power cable and AC adapter:

When installing the product, use the provided or designated connection cables, power cables

and AC adaptors. Using any other cables and adaptors could cause a malfunction or a fire.

Electrical Appliance and Material Safety Law prohibits the use of UL or CSA-certified cables

(that have UL/CSA shown on the code) for any other electrical devices.

Warning!

This product relies on the building's installation for short-circuit (overcurrent) protection.

Make sure that the protective device is rated not greater than: 250V, 20A.

Notice!

Safety Extra Low Voltage (SELV) circuits

All the input/output ports are SELV circuits. Connect SELV circuits only to other SELV

circuits.

Notice!

Power supplies

Operate the product only from the type of power source indicated on the label. Use only the

provided power supply or UL approved power supplies. Use a power supply according to LPS

or NECClass2.

Warning!

Make sure that the power supply cord includes a grounding plug and is plugged into a

grounded electrical outlet.

Notice!

Protect connection cables

Protect all connection cables from possible damage, especially at connection points.

DIVAR IP all-in-one 6000 Safety | en 7

Bosch Security Systems B.V. Installation manual 2022-10 | V02 | F.01U.407.903

Notice!

Permanently connected devices must have an external, readily operable mains plug or all‑pole

mains switch in accordance with installation rules.

Notice!

Pluggable devices must have an easily accessible electrical outlet installed near the

equipment.

Warning!

Interruption of mains supply:

Voltage is applied as soon as the mains plug is inserted into the mains socket.

However, for devices with a mains switch, the device is only ready for operation when the

mains switch (ON/OFF) is in the ON position. When the mains plug is pulled out of the

socket, the supply of power to the device is completely interrupted.

Warning!

Do not put any objects in the openings of this product. The objects may touch dangerous

voltage points or short-circuit components, which could result in a fire or electrical shock.

Caution!

Power supply cords

Make sure to route the power supply cords in a way so that they are protected from any

possible damage.

Warning!

To prevent electrical shock hazard, disconnect all power cables from the electrical outlet

before relocating the system.

Caution!

Disconnect power cables before installing or removing any components from the device.

Notice!

When disconnecting power, first turn off the system and then unplug the power cord from the

power supply module in the system.

Notice!

Be aware of the locations of the power on/off switch on the device as well as the room's

emergency power-off switch, disconnection switch or electrical outlet. If an electrical

accident occurs, you can then quickly remove power from the system.

8en | Safety DIVAR IP all-in-one 6000

2022-10 | V02 | F.01U.407.903 Installation manual Bosch Security Systems B.V.

Warning!

Use only one hand when working with powered-on electrical equipment. This is to avoid

making a complete circuit, which will cause electrical shock.

Use extreme caution when using metal tools, which can easily damage any electrical

components or circuit boards they come into contact with.

1.4 ESD precautions

Notice!

Electrostatically sensitive device

Electrostatic Discharge (ESD) can damage electronic components. To avoid electrostatic

discharges, use proper CMOS/MOSFET protection measures.

– Do not use mats designed to decrease electrostatic discharge as protection from

electrical shock. Instead, use rubber mats that have been specifically designed as

electrical insulators.

– Use a grounded wrist strap designed to prevent static discharge.

1.5 Operating precautions

Notice!

Intended use

This product is for professional use only. It is not intended to be installed in a public area that

is accessible to the general population.

Notice!

Do not use this product in any humid or wet location.

Notice!

Take precautions to protect the device from power and lightning surges.

Notice!

Keep the area around the device clean and free of clutter.

Notice!

Enclosure openings

Do not block or cover the openings. Any openings in the enclosure are provided for ventilation

purposes. These openings will prevent overheating and ensure a reliable operation.

Notice!

Do not open or remove the device cover. Opening or removing the cover may cause damage

to the system and will void the warranty.

DIVAR IP all-in-one 6000 Safety | en 9

Bosch Security Systems B.V. Installation manual 2022-10 | V02 | F.01U.407.903

Notice!

Do not spill any liquid on the device.

Warning!

Use caution when servicing and working around the backplane. Hazardous voltage or energy

is present on the backplane when the system is operating. Do not touch the backplane with

any metal objects and make sure no ribbon cables touch the backplane.

Notice!

Disconnect the power before moving the product. Move the product with care. Excessive

force or shock may damage the product and the hard disk drives.

Warning!

Handling of lead solder materials used in this product may expose you to lead, a chemical

known to the State of California to cause birth defects and other reproductive harm.

Notice!

Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be

held liable for any damage that results from missing video information.

To minimize the risk of losing information, we recommend multiple, redundant recording

systems, and a procedure to back up all analog and digital information.

1.6 Service and maintenance precautions

Notice!

Do not attempt to service this product. Refer all servicing to qualified service personnel.

Notice!

Damaged device

Whenever your device is damaged, disconnect the power supply, and contact your qualified

service personnel.

– If safe operation of the device cannot be ensured, remove it from service and secure it to

prevent unauthorized operation. In such cases, contact the Bosch technical support.

– Disconnect power supply and arrange for the device to be serviced by qualified personnel

in the following cases, because safe operation is no longer possible:

– The power cable/plug is damaged.

– Liquids or foreign bodies have entered the device.

– The device has been exposed to water or extreme environmental conditions.

– The device is faulty despite correct installation/operation.

– The device has fallen from a height, or the housing has been damaged.

– The device was stored over a long period under adverse conditions.

– The device performance is noticeably changed.

10 en | Safety DIVAR IP all-in-one 6000

2022-10 | V02 | F.01U.407.903 Installation manual Bosch Security Systems B.V.

Warning!

Battery replacement - For qualified service personnel only

A lithium battery is located inside the unit enclosure. To avoid danger of explosion, replace

the battery as per instructions. Replace only with the same or equivalent type recommended

by the manufacturer.

Handle used batteries carefully. Do not damage the battery in any way. A damaged battery

may release hazardous materials into the environment.

Dispose of the replaced battery in an environmentally friendly way and not with other solid

waste. Follow the local directives.

Warning!

Replacement parts specified by the manufacturer

Use replacement parts specified by the manufacturer. Unauthorized replacements could void

the warranty and cause fire, electrical shock, or other hazards.

Notice!

Perform safety inspections after service or repairs to the device to make sure the device

operates properly.

1.6.1 Cleaning

Notice!

Unplug the device from the power source before cleaning. Follow the instructions provided

with the device.

Notice!

Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

1.7 Cybersecurity precautions

For cybersecurity reasons, observe the following:

– Make sure that the physical access to the system is restricted to authorized personnel

only. Place the system in an access control protected area, in order to avoid physical

manipulation.

– The operating system includes the latest Windows security patches available at the time

the software image was created. Use the Windows online update functionality or the

corresponding monthly roll-up patches for offline installation to regularly install OS

security updates.

– Do not switch off Windows Defender and Windows firewall, and always keep it up to

date.

– Do not install additional anti-virus software.

– Do not provide system information and sensitive data to persons you do not know unless

you are certain of a person's authority.

– Do not send sensitive information over the internet before checking a website's security.

– Limit local network access to trusted devices only. Details are described in the following

documents which are available in the online product catalog:

– Network Authentication 802.1X

– Cybersecurity guidebook for Bosch IP video products

Andere Handbücher für DIVAR IP all-in-one 6000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Aufnahmegeräte Handbücher

Bosch

Bosch DIVAR IP all-in-one 4000 Bedienungsanleitung

Bosch

Bosch DCN multimedia Bedienungsanleitung

Bosch

Bosch DIP-5042EZ-0HD Bedienungsanleitung

Bosch

Bosch Climate 5000 Series Bedienungsanleitung

Bosch

Bosch TINYON IP 2000 WI Montageanleitung

Bosch

Bosch B450 Betriebsanleitung

Bosch

Bosch D8125MUX Betriebsanleitung

Bosch

Bosch MSI 60 Bedienungsanleitung

Bosch

Bosch FLM-420-O2-D Bedienungsanleitung

Bosch

Bosch CLIMATE 5000 VRF RDCI Series Bedienungsanleitung

Bosch

Bosch ADS 525X Bedienungsanleitung

Bosch

Bosch Divar 700 Series Bedienungsanleitung

Bosch

Bosch DVR1A1081 Bedienungsanleitung

Bosch

Bosch FLM-420-NAC-S Bedienungsanleitung

Bosch

Bosch Rexroth IMmtcp Bedienungsanleitung

Bosch

Bosch FLM-420/4-CON-S Bedienungsanleitung

Bosch

Bosch DIVAR IP 2000 DIP-2040EZ-00N Bedienungsanleitung

Bosch

Bosch B450 Original Betriebsanleitung

Bosch

Bosch DX4010V2 Bedienungsanleitung

Bosch

Bosch MIC-ALM-WAS-24 Bedienungsanleitung

Bosch

Bosch CR 400 Bedienungsanleitung

Bosch

Bosch Worcester Greenstar HIU E Bedienungsanleitung

Bosch

Bosch Rexroth IMenip2 Bedienungsanleitung

Bosch

Bosch HPC 410 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch