Bosch DINION IP imager 9000 HD Bedienungsanleitung

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

DINION imager 9000 HD

NAI-90022

en Installation Manual

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

3DINION imager 9000 HD Table of Contents | en

Table of Contents

1Safety 4

1.1 Safety precautions 4

1.2 Important safety instructions 4

1.3 Important notices 5

1.4 FCC & ICES compliance 8

1.5 FCC Information 9

1.6 CSA certification - Disclaimer 10

2 Planning 12

2.1 Pre-installation Checklist 14

3 Installation 16

3.1 Overview of Installation Steps 16

3.2 Select Tilt and Width of Illumination Beam 17

3.2.1 Changing the angle of IR LED tilt 18

3.2.2 Inserting the 3D diffuser 19

3.3 Unattach Junction Box 20

3.4 Mount the Junction Box 21

3.5 Route Wires and Attach Connectors 22

3.5.1 Input/Output Connections 23

3.6 Attach Camera to Junction Box 24

4 Camera Set-up 26

4.1 Rear controls 26

4.1.1 Accessing the control panel 26

4.1.2 Control panel 27

4.2 Camera positioning and field-of-view 28

4.2.1 Making Pan Adjustments 28

4.2.2 Making Tilt Adjustments 28

4.3 Using the install wizard 30

4.3.1 Adjustment procedure 30

Bosch Security Systems Installation manual AM18-Q0663 | 1.0 | 2013.09

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

4 en | Safety DINION imager 9000 HD

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as “Dangerous Voltage” inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

NOTICE!

This symbol indicates information or a company policy that

relates directly or indirectly to the safety of personnel or

protection of property.

1.2 Important safety instructions

Read, follow, and retain all of the following safety instructions.

Heed all warnings on the unit and in the operating instructions

before operating the unit.

1. Clean only with dry cloth.

2. Do not block any ventilation openings. Install in

accordance with manufacturer’s instructions.

3. Do not install near any heat sources such as radiators, heat

registers, stoves or other apparatus (including amplifiers)

that produce heat.

AM18-Q0663 | 1.0 | 2013.09 Installation manual Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

5DINION imager 9000 HD Safety | en

4. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

power where they exit from the apparatus.

5. Use only attachments/accessories specified by the

manufacturer.

6. Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in a

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

does not operate normally, or has dropped. When

servicing, power shall be disconnected.

1.3 Important notices

Accessories - Do not place this unit on an

unstable stand, tripod, bracket, or mount. The

unit may fall, causing serious injury and/or

serious damage to the unit. Use only with the

cart, stand, tripod, bracket, or table specified by

the manufacturer. When a cart is used, use

caution and care when moving the cart/

apparatus combination to avoid injury from tip-

over. Quick stops, excessive force, or uneven

surfaces may cause the cart/unit combination to

overturn. Mount the unit per the manufacturer's

instructions.

All-pole power switch - Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building. If it is needed to open the

housing for servicing and/or other activities, use this all-pole

switch as the main disconnect device for switching off the

voltage to the unit.

Camera signal - Protect the cable with a primary protector if

the camera signal is beyond 140 feet, in accordance with

NEC800 (CEC Section 60).

Bosch Security Systems Installation manual AM18-Q0663 | 1.0 | 2013.09

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

6 en | Safety DINION imager 9000 HD

CAUTION!

This product has been tested according to standard CIE/IEC

62471:2006 “Photobiological safety of lamps and lamp

systems” and found to meet Risk Group 2 for exposure limit

4.3.7 “Infrared radiation hazard exposure limits for the eye.”

For other hazard exposure limits, the product was found to be

exempt. Risk Group 2 is characterized in the standard as

“products generally do not pose a realistic optical hazard if

aversion responses limit the exposure duration or where

lengthy exposures are unrealistic.” Since there is no aversion

response for IR, avoid eye exposure. Risk Group 2 sources do

not pose an infrared radiation hazard for the eye within 10 s

at distances beyond 200 mm or 8 inches.

The Exposure Hazard Value for the product (ratio of the

Exposure level to the Exposure limit) is up to 10 at a test

distance of 200 mm (8 inches). The Hazard Distance

(distance beyond which the product falls into the exempt/

safe group) is at most 640 mm (25 inches). Note that typical

use cases are well beyond the Hazard Distance.

When servicing the unit, physically disconnect the power

supply to avoid possible IR exposure to the eyes. If physical

disconnection is not possible, use appropriate shielding to

block the LED panel or use eye protection with a transmission

of 10% or less at a wavelength of 850 nm.

Coax grounding:

– Ground the cable system if connecting an outside cable

system to the unit.

– Connect outdoor equipment to the unit's inputs only after

this unit has had its grounding plug connected to a

grounded outlet or its ground terminal is properly

connected to a ground source.

– Disconnect the unit's input connectors from outdoor

equipment before disconnecting the grounding plug or

grounding terminal.

AM18-Q0663 | 1.0 | 2013.09 Installation manual Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

7DINION imager 9000 HD Safety | en

– Follow proper safety precautions such as grounding for

any outdoor device connected to this unit.

U.S.A. models only - Section 810 of the National Electrical Code,

ANSI/NFPA No.70, provides information regarding proper

grounding of the mount and supporting structure, grounding of

the coax to a discharge unit, size of grounding conductors,

location of discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Disposal - Your Bosch product was developed

and manufactured with high-quality material and

components that can be recycled and reused.

This symbol means that electronic and electrical

appliances, which have reached the end of their

working life, must be collected and disposed of

separately from household waste material.

Separate collecting systems are usually in place

for disused electronic and electrical products.

Please dispose of these units at an

environmentally compatible recycling facility,

per European Directive 2002/96/EC.

Electronic Surveillance - This device is intended for use in

public areas only. U.S. federal law strictly prohibits

surreptitious recording of oral communications.

Environmental statement - Bosch has a strong commitment

towards the environment. This unit has been designed to

respect the environment as much as possible.

Fuse rating - For protection of the device, the branch circuit

protection must be secured with a maximum fuse rating of 16A.

This must be in accordance with NEC800 (CEC Section 60).

Moving - Disconnect the power before moving the unit. Move

the unit with care. Excessive force or shock may damage the

unit and the hard disk drives.

Outdoor signals - The installation for outdoor signals, especially

regarding clearance from power and lightning conductors and

transient protection, must be in accordance with NEC725 and

NEC800 (CEC Rule 16-224 and CEC Section 60).

Bosch Security Systems Installation manual AM18-Q0663 | 1.0 | 2013.09

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

8 en | Safety DINION imager 9000 HD

Permanently connected equipment - Incorporate a readily

accessible disconnect device external to the equipment.

Pluggable equipment - Install the socket outlet near the

equipment so it is easily accessible.

Power resupply - If the unit is forced to power down due to

exceeding the specified operating temperatures, disconnect

the power cord, wait for at least 30 seconds, and then

reconnect the power cord.

Power lines - Do not locate the camera near overhead power

lines, power circuits, or electrical lights, nor where it may

contact such power lines, circuits, or lights.

SELV - All the input/output ports are Safety Extra Low Voltage

(SELV) circuits. SELV circuits should only be connected to

other SELV circuits.

Because the ISDN circuits are treated like telephone-network

voltage, avoid connecting the SELV circuit to the Telephone

Network Voltage (TNV) circuits.

Video loss - Video loss is inherent to digital video recording;

therefore, Bosch Security Systems cannot be held liable for any

damage that results from missing video information. To

minimize the risk of lost digital information, Bosch Security

Systems recommends multiple, redundant recording systems,

and a procedure to back up all analog and digital information.

1.4 FCC & ICES compliance

FCC Information (U.S.A. and Canada)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

AM18-Q0663 | 1.0 | 2013.09 Installation manual Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

9DINION imager 9000 HD Safety | en

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult

the dealer or an experienced radio/television technician for

corrective action.

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office,

Washington, DC 20402, Stock No. 004-000-00345-4.

1.5 FCC Information

Informations FCC et ICES (modèles utilisés aux États-Unis et

au Canada uniquement)

Suite à différents tests, cet appareil s'est révélé conforme aux

exigences imposées aux appareils numériques de classe B, en

vertu de la section 15 du règlement de la Commission fédérale

des communications des États-Unis (FCC), et en vertu de la

norme ICES-003 d'Industrie Canada. Ces exigences visent à

fournir une protection raisonnable contre les interférences

nuisibles lorsque l'appareil est utilisé dans le cadre d'une

installation résidentielle. Cet appareil génère, utilise et émet

de l'énergie de radiofréquences et peut, en cas d'installation ou

d'utilisation non conforme aux instructions, engendrer des

Bosch Security Systems Installation manual AM18-Q0663 | 1.0 | 2013.09

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

10 en | Safety DINION imager 9000 HD

interférences nuisibles au niveau des radiocommunications.

Toutefois, rien ne garantit l'absence d'interférences dans une

installation particulière. Il est possible de déterminer la

production d'interférences en mettant l'appareil

successivement hors et sous tension, tout en contrôlant la

réception radio ou télévision. L'utilisateur peut parvenir à

éliminer les interférences éventuelles en prenant une ou

plusieurs des mesures suivantes:

– Modifier l'orientation ou l'emplacement de l'antenne

réceptrice;

– Éloigner l'appareil du récepteur;

– Brancher l'appareil sur une prise située sur un circuit

différent de celui du récepteur;

– Consulter le revendeur ou un technicien qualifié en radio/

télévision pour obtenir de l'aide.

Toute modification apportée au produit, non expressément

approuvée par la partie responsable de l'appareil, est

strictement interdite. Une telle modification est susceptible

d'entraîner la révocation du droit d'utilisation de l'appareil. Au

besoin, l’utilisateur consultera son revendeur ou un technicien

qualifié en radio/télévision, qui procédera à une opération

corrective.

La brochure suivante, publiée par la Commission fédérale des

communications (FCC), peut s'avérer utile : How to Identify and

Resolve Radio-TV Interference Problems (Comment identifier et

résoudre les problèmes d’interférences de radio et de télévision).

Cette brochure est disponible auprès du U.S. Government

Printing Office, Washington, DC 20402, États-Unis, sous la

référence n° 004-000-00345-4.

1.6 CSA certification - Disclaimer

CSA has not tested the performance or reliability of the security

or signaling aspects of this product. CSA has only tested fire,

shock and/or casualty hazards as outlined in CSA's Standard(s)

for Safety for Closed Circuit Television Equipment, UL 2044. CSA

Certification does not cover the performance or reliability of

AM18-Q0663 | 1.0 | 2013.09 Installation manual Bosch Security Systems

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Andere Handbücher für DINION IP imager 9000 HD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Sicherheitskamera Handbücher

Bosch

Bosch MIC Series 500 Bedienungsanleitung

Bosch

Bosch DINION 4000 AN Benutzerhandbuch

Bosch

Bosch VDC-275 Bedienungsanleitung

Bosch

Bosch NBN-498 Bedienungsanleitung

Bosch

Bosch DINION IP ultra 8000 MP Bedienungsanleitung

Bosch

Bosch FLEXIDOME IP starlight 8000i Bedienungsanleitung

Bosch

Bosch WZ20NXV550-0 Bedienungsanleitung

Bosch

Bosch WZ14N4-0 Bedienungsanleitung

Bosch

Bosch FLEXIDOME NIN-733 Bedienungsanleitung

Bosch

Bosch FlexiDomeXT LTC 1361/10 Bedienungsanleitung

Bosch

Bosch FlexiDomeXF VDC-485V03-10 Bedienungsanleitung

Bosch

Bosch VEN-650V05-2A3 Bedienungsanleitung

Bosch

Bosch V1160 Series Bedienungsanleitung

Bosch

Bosch LTC 0435 Series Bedienungsanleitung

Bosch

Bosch FLEXIDOME IP indoor 5000 Bedienungsanleitung

Bosch

Bosch EX72MNX8V0922-N Bedienungsanleitung

Bosch

Bosch VEZ Series Leitfaden

Bosch

Bosch Diniop IP - NWC-0455 Bedienungsanleitung

Bosch

Bosch VG5 600 Series Bedienungsanleitung

Bosch

Bosch AUTODOME IP starlight 5100i IR Bedienungsanleitung

Bosch

Bosch VTC-206 Series Bedienungsanleitung

Bosch

Bosch AUTODOME 5000 PTZ Bedienungsanleitung

Bosch

Bosch AN traffic 4000 IR Bedienungsanleitung

Bosch

Bosch DINION IP 5000 Gebrauchsanweisung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung