Bosch WZ18 Bedienungsanleitung

en Installation Manual

Integrated IR Bullet Camera

WZ18

Integrated IR Bullet Camera Table of Contents | en 3

Table of Contents

1 Safety 5

1.1 Important safety instructions 5

1.2 Important safety instructions 6

1.3 Important notices 7

1.4 Customer Support and Service 14

2 Features 16

3Box Contents 17

4Camera Parts and Adjustments 18

5Installation 19

5.1 Mounting Position 19

5.2 Monitor Connection 20

6Dimensions 21

7 Specications 22

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2011.01

4en | Table of Contents Integrated IR Bullet Camera

8 OSD Manual 23

8.1 Lens Menu 23

8.2 Exposure Menu 23

8.3 White Balance Menu 24

8.4 Day & Night Menu 24

8.5 Image Menu 24

8.6 3DNR Balance Menu 25

8.7 Special Menu 25

8.8 Reset Menu 25

8.9 OSD Function Description 26

8.9.1 Lens 26

8.9.2 Exposure 26

8.9.3 White Balance 27

8.9.4 Day and Night 27

8.9.5 Image 28

8.9.6 3DNR 28

8.9.7 Special 29

8.9.8 Reset 30

| 1.0 | 2011.01 Installation Manual Bosch Security Systems, Inc.

Integrated IR Bullet Camera Safety | en 5

1 Safety

1.1 Important safety instructions

WARNING!

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONELL.

WARNING!

This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be

required to take adequate measures.

CAUTION!

Any changes or modications in construction of this device

which are not expressly approved by the party responsible

for compliance could void the user’s authority to operate the

equipment.

CAUTION!

These servicing instructions are for use by qualied service

personnel only.

To reduce the risk of electric shock do not perform any servicing

other than that contained in the operating instructions unless you

are qualied to do so.

In USA and Canada, use a Class 2 power supply only.

NOTICE!

After adjusting zoom and focus, to prevent water inltration,

rmly tighten the zoom and focus lever. (Rep: 10) When you

install the camera, please glue up the end of cable to

keep it stable in order to protect the camera from the humidity

problems. (Rep: 11)

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2011.01

6 en | Safety Integrated IR Bullet Camera

1.2 Important Safety Instructions

1. Read these instructions.

2. Keep this instruction.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with manufacturer instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves or other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug

does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

power where they exit from the apparatus.

11. Only use attachments/accessories specied by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

| 1.0 | 2011.01 Installation Manual Bosch Security Systems, Inc.

Integrated IR Bullet Camera Safety | en 7

14. Refer all servicing to qualied service personnel. Servicing

is required when the apparatus has been damaged in a

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

1.3 Important Safety Instructions

CAUTION!

1. A regulated DC12V 1A power supply is recommended for

use with this camera for the best picture and the most

stable operation. An unregulated power supply can cause

damage to the camera. When unregulated power supply is

applied, product warranty will be out of subject.

2. It is recommended that the camera is used with a monitor

that has a CCTV quality 75 Ohm video impedance level. If

your monitor is switched to high impedance then please

adjust accordingly.

3. Do not attempt to disassemble the camera to gain access

to the internal compounds. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or

reective light, which may cause smear on the picture and

possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

All-pole power switch - Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building. If it is needed to open the

housing for servicing and/or other activities, use this all-pole

switch as the main disconnect device for switching off the

voltage to the unit.

Camera grounding - For mounting the camera in potentially

damp environments, ensure to ground the system using the

ground connection of the power supply connector (see section:

Connecting external power supply).

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2011.01

8 en | Safety Integrated IR Bullet Camera

Camera lens - An assembled camera lens in the outdoor

housing must comply and be tested in accordance with UL/

IEC60065. Any output or signal lines from the camera must be

SELV or Limited Power Source. For safety reasons the

environmental specication of the camera lens assembly must

be within the environmental specication of -10 °C (14 °F) to

50 °C (122 °F).

Camera signal - Protect the cable with a primary protector if

the camera signal is beyond 140 feet, in accordance with

NEC800 (CEC Section 60).

Coax grounding:

– Ground the cable system if connecting an outside cable

system to the unit.

– Connect outdoor equipment to the unit’s inputs only after

this unit has had its grounding plug connected to a

grounded outlet or its ground terminal is properly

connected to a ground source.

– Disconnect the unit’s input connectors from outdoor

equipment before disconnecting the grounding plug or

grounding terminal.

– Follow proper safety precautions such as grounding for

any outdoor device connected to this unit.

U.S.A. models only - Section 810 of the National Electrical Code,

ANSI/NFPA No.70, provides information regarding proper

grounding of the mount and supporting structure, grounding of

the coax to a discharge unit, size of grounding conductors,

location of discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Disposal - Your Bosch product was developed and

manufactured with high-quality material and components that

can be recycled and reused. This symbol means that electronic

and electrical appliances, which have reached the end of their

working life, must be collected and disposed of separately from

household waste material. Separate collecting systems are

usually in place for disused electronic and electrical products.

Please dispose of these units at an environmentally compatible

recycling facility, per European Directive 2002/96/EC.

| 1.0 | 2011.01 Installation Manual Bosch Security Systems, Inc.

Integrated IR Bullet Camera Safety | en 9

Electronic Surveillance - This device is intended for use in

public areas only. U.S. federal law strictly prohibits

surreptitious recording of oral communications.

Environmental statement - Bosch has a strong commitment

towards the environment. This unit has been designed to

respect the environment as much as possible.

Electrostatic-sensitive device - Use proper CMOS/MOS-FET

handling precautions to avoid electrostatic discharge.

NOTE: Wear required grounded wrist straps and observe proper

ESD safety precautions when handling the electrostaticsensitive

printed circuit boards.

Fuse rating - For security protection of the device, the branch

circuit protection must be secured with a maximum fuse rating

of 16A. This must be in accordance with NEC800 (CEC Section

60).

Moving - Disconnect the power before moving the unit. Move

the unit with care. Excessive force or shock may damage the

unit and the hard disk drives.

Outdoor signals - The installation for outdoor signals, especially

regarding clearance from power and lightning conductors and

transient protection, must be in accordance with NEC725 and

NEC800 (CEC Rule 16-224 and CEC Section 60).

Permanently connected equipment - Incorporate a readily

accessible disconnect device in the building installation wiring.

Pluggable equipment - Install the socket outlet near the

equipment so it is easily accessible.

Power resupply - If the unit is forced to power down due to

exceeding the specied operating temperatures, disconnect

the power cord, wait for at least 30 seconds, and then

reconnect the power cord.

Power lines - Do not locate the camera near overhead power

lines, power circuits, or electrical lights, nor where it may

contact such power lines, circuits, or lights.

Bosch Security Systems, Inc. Installation Manual | 1.0 | 2011.01

10 en | Safety Integrated IR Bullet Camera

Rack-mount

– Ventilation - Do not place this unit in a built-in installation

or rack without proper ventilation or adhering to the

manufacturer’s instructions. The equipment must not

exceed its maximum operating temperature requirements.

– Mechanical loading - Properly mount the equipment in a

rack to prevent a hazardous condition due to uneven

mechanical loading.

SELV

All the input/output ports are Safety Extra Low Voltage (SELV)

circuits. SELV circuits should only be connected to other SELV

circuits.

Because the ISDN circuits are treated like telephone-network

voltage, avoid connecting the SELV circuit to the Telephone

Network Voltage (TNV) circuits.

The system ground is only used to comply with safety standards

or installation practices in certain countries. Bosch does not

recommend connecting system ground to safety ground unless

it is explicitly required. However, if the system ground and

safety ground are connected and grounding loops are causing

interference in the video signal, use an isolation transformer

(available separately from Bosch).

CAUTION!

Connecting System ground to Safety ground may result in

ground loops that can disrupt the CCTV system.

Video loss - Video loss is inherent to digital video recording;

therefore, Bosch Security Systems cannot be held liable for any

damage that results from missing video information. To

minimize the risk of lost digital information, Bosch Security

Systems recommends multiple, redundant recording systems,

and a procedure to back up all analog and digital information.

| 1.0 | 2011.01 Installation Manual Bosch Security Systems, Inc.

Inhaltsverzeichnis

Andere Bosch Sicherheitskamera Handbücher

Bosch

Bosch VG4 Series Bedienungsanleitung

Bosch

Bosch DINION 5000 Bedienungsanleitung

Bosch

Bosch Dinion LTC0335/20 Bedienungsanleitung

Bosch

Bosch FLEXIDOME panoramic 5100i Bedienungsanleitung

Bosch

Bosch AUTODOME IP starlight 5000i IR Bedienungsanleitung

Bosch

Bosch NEI-Series Bedienungsanleitung

Bosch

Bosch FlexiDomeVF VDM-345V03-20 Bedienungsanleitung

Bosch

Bosch AUTODOME 800 Series Bedienungsanleitung

Bosch

Bosch EX62XF Bedienungsanleitung

Bosch

Bosch NWC?0495 Bedienungsanleitung

Bosch

Bosch VEZ-400 Series Bedienungsanleitung

Bosch

Bosch LTC 0435 Series Bedienungsanleitung

Bosch

Bosch DINION IP starlight 7000 HD Bedienungsanleitung

Bosch

Bosch EX65 Bedienungsanleitung

Bosch

Bosch VJR-821-ICCV Bedienungsanleitung

Bosch

Bosch VDC-480V03-20S Bedienungsanleitung

Bosch

Bosch DINION 3100i IR NBE-3702-AL Bedienungsanleitung

Bosch

Bosch 300 Series Bedienungsanleitung

Bosch

Bosch AN traffic 4000 IR Bedienungsanleitung

Bosch

Bosch V1160 Series Bedienungsanleitung

Bosch

Bosch MIC Series 400 Bedienungsanleitung

Bosch

Bosch VJR SERIES Bedienungsanleitung

Bosch

Bosch VDN-498V03-11 Bedienungsanleitung

Bosch

Bosch FlexiDomeXT LTC 1361/10 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung