Bosch ISW-BMC1-M82X Anleitung zur Verwendung

Wireless Local Security Network wLSN

Release Notes October 2006

1.0 Compatibility

wLSN is compatible with the Easy Series V2+

Intrusion Control Panel.

2.0 Known Issues

2.1 General Information

CAUTION: If you have unused wireless

devices, replace the battery tabs or

remove the batteries to prevent battery

depletion.

•Returning a Device to an Undiscovered State:

In the wLSN Reference Guide (P/N: F01U009440),

Section 2.4 Site Testing explains how to return a

device to the undiscovered state. This explanation

is incorrect. Below is the correct procedure:

1. Remove the batteries.

2. Press and hold the tamper switch button.

3. Reinsert the batteries while holding the

tamper switch button.

The device’s LED turns on.

4. Release the tamper switch button within five

sec. after the device’s LED turns on.

The device returns to an undiscovered state.

•Magnet Placement for Door-Window Contact,

Mini Door-Window Contact, and Inertia

Detector: The magnet can be placed on either

side of these devices.

2.2 Mini Door-Window Contact

(ISW-BMC1-M82X)

Tamper Switch Location: Refer to Figure 1 for the

location of the tamper switch on the Mini Door-

Window Contact.

Figure 1: Tamper Switch Location

2.3 Recessed Door-Window Contact

(ISW-BMC1-R135X)

Tamper Switch Location: Refer to Figure 2 for the

location of the tamper switch on the Recessed Door-

Window Contact.

Figure 2: Tamper Switch Location

2.4 Glassbreak Detector

(ISW-BGB1-SAX)

•RF Signal Strength (RFSS) Mode LED

Location: Refer to Figure 3 for the location of the

LED that turns on when the detector enters RFSS

Mode.

Figure 3: RFSS Mode LED Location

www.boschsecuritysystems.com

F01U032063B

Release Notes

10/0

wLS

Page 2 of

•Entering RFSS Mode with Wall Tamper Tab

Removed:

1. Take the detector to its planned mounting

location.

2. Remove and reinsert the batteries.

3. Press and hold the wall tamper switch.

Refer to Figure 4.

4. Quickly press and release the cover tamper

switch four times. Refer to Figure 5.

The detector enters RFSS Mode.

Figure 4: Wall Tamper Switch Location

Figure 5: Cover Tamper Switch Location

•Returning a Glassbreak Detector with the

Wall Tamper Tab Removed to an

Undiscovered State:

1. Remove the batteries from the detector.

2. Place the detector on a flat surface to depress

the wall tamper switch.

Refer to Figure 4.

3. Press and hold the cover tamper switch.

Refer to Figure 5.

4. While both tamper switches are depressed,

reinsert the batteries.

The RFSS Mode LED turns on. Refer to

Figure 3 on page 1.

5. Release the cover tamper switch within five

sec. after the RFSS Mode LED turns on.

The detector returns to an undiscovered state.

2.5 wLSN Key Fob

(ISW-BKF1-H5X)

Programmable Buttons: To operate the

programmable buttons, press and hold either button

for at least 1 sec. Refer to Figure 6.

Figure 6: Programmable Button Locations

Andere Handbücher für ISW-BMC1-M82X

Dieses Handbuch passt für folgende Modelle

Andere Bosch Sicherheitssystem Handbücher

Bosch

Bosch CP700B Anleitung zur Verwendung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Bosch

Bosch FK 100 LSN Bedienungsanleitung

Bosch

Bosch Plena LBB 1965 Bedienungsanleitung

Bosch

Bosch D1260 Series Bedienungsanleitung

Bosch

Bosch DRA Series Bedienungsanleitung

Bosch

Bosch Plena Power Amplifier Montageanleitung

Bosch

Bosch DIP-6083-8HD Bedienungsanleitung

Bosch

Bosch ISW-BKF1-H5X Bedienungsanleitung

Bosch

Bosch Solution 64 Bedienungsanleitung

Bosch

Bosch ICP-AMAX4-P2-EN Bedienungsanleitung

Bosch

Bosch DVR4C2161 Bedienungsanleitung

Bosch

Bosch DS860 Series Bedienungsanleitung

Bosch

Bosch SE 320 LSNi Bedienungsanleitung

Bosch

Bosch Solution 16i Bedienungsanleitung

Bosch

Bosch AMAX panel 4000 Bedienungsanleitung

Bosch

Bosch FW5.50 Montageanleitung

Bosch

Bosch BE 300 LSN Bedienungsanleitung

Bosch

Bosch CM728B Anleitung zur Verwendung

Bosch

Bosch DS840LSN Bedienungsanleitung

Bosch

Bosch TC2073 Bedienungsanleitung

Bosch

Bosch Security System Bedienungsanleitung

Bosch

Bosch FNM-320 Series Bedienungsanleitung

Bosch

Bosch Solution 2000 Series Betriebsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung