Bosch NDA-U-PA0 Bedienungsanleitung
Surveillance Cabinet
NDA-U-PA0 | NDA-U-PA1 | NDA-U-PA2
en Installation manual
Table of contents
1Important Safety Instructions 4
1.1 Safety precautions 4
1.2 Important safety instructions 4
1.3 Important Notices 5
1.4 UL certification 6
1.5 Bosch notices 7
2Unpacking 8
2.1 Parts list 8
2.2 Optional mounting accessories 8
2.3 Description 8
2.4 Tools required 8
3Installing the Surveillance cabinet 10
3.1 Pre-installation checklist 10
3.2 Mounting the Surveillance cabinet 11
3.3 Routing the wires and attaching the connectors 11
3.4 Routing power through intermediate unit 14
3.5 Attaching the door 18
3.6 Attaching the Pendant pipe mount or Pendant wall mount 19
3.7 Making connections in unit 19
4Connections for video, control, alarm and relay 20
4.1 Using fiber optic ethernet media converter to transmit video and control 20
Surveillance Cabinet Table of Contents | en 3
Bosch Security Systems Installation manual 2017.09 | v1.0 | F.01U.250.239
Important Safety Instructions
Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit
and in the operating instructions before operation.
Safety precautions
Danger!
High risk: This symbol indicates an imminently hazardous situation such as “Dangerous
Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious bodily injury, or death.
!
Warning!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily injury.
!
Caution!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of damage to the unit.
Notice!
This symbol indicates information or a company policy that relates directly or indirectly to the
safety of personnel or protection of property.
Important safety instructions
Read, follow, and retain for future reference all of the following safety instructions. Heed all
warnings on the unit and in the operating instructions before operating the unit.
1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions
provided with the unit. Generally, using a dry cloth for cleaning is sufficient but a moist,
fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Water - Do not use this unit near water, for example near a bathtub, washbowl, sink,
laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor
installation, or in any area classified as a wet location. To reduce the risk of fire or
electrical shock, do not expose this unit to rain or moisture.
3. Object and liquid entry - Never push objects of any kind into this unit through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire
or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled
with liquids, such as vases or cups, on the unit.
4. Power cord and plug protection - Protect the plug and power cord from foot traffic,
being pinched by items placed upon or against them at electrical outlets, and its exit from
the unit. For units intended to operate with 230 VAC, 50 Hz, the input and output power
cord must comply with the latest versions of IEC Publication 227 or IEC Publication 245.
5. Power disconnect - Units have power supplied to the unit whenever the power cord is
inserted into the power source. The power cord plug is the main power disconnect device
for switching off the voltage for all units.
1
1.1
1.2
4en | Important Safety Instructions Surveillance Cabinet
2017.09 | v1.0 | F.01U.250.239 Installation manual Bosch Security Systems
6. Power sources - Operate the unit only from the type of power source indicated on the
label. Before proceeding, be sure to disconnect the power from the cable to be installed
into the unit.
– For battery powered units, refer to the operating instructions.
– For external power supplied units, use only the recommended or approved power
supplies.
– For limited power source units, this power source must comply with EN60950.
Substitutions may damage the unit or cause fire or shock.
– For 24 VAC units, voltage applied to the unit's power input should not exceed ±10%,
or 28 VAC. User-supplied wiring must comply with local electrical codes (Class 2
power levels). Do not ground the supply at the terminals or at the unit's power
supply terminals.
– If unsure of the type of power supply to use, contact your dealer or local power
company.
7. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
8. Damage requiring service - Unplug the unit from the main AC power source and refer
servicing to qualified service personnel when any damage to the equipment has occurred,
such as:
– the power supply cord or plug is damaged;
– exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
– liquid has been spilled in or on the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly follows the operating
instructions.
9. Replacement parts - Be sure the service technician uses replacement parts specified by
the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.
10. Safety check - Safety checks should be performed upon completion of service or repairs
to the unit to ensure proper operating condition.
11. Installation - Install in accordance with the manufacturer's instructions and in accordance
with applicable local codes.
12. Attachments, changes or modifications - Only use attachments/accessories specified by
the manufacturer. Any change or modification of the equipment, not expressly approved
by Bosch, could void the warranty or, in the case of an authorization agreement, authority
to operate the equipment.
Important Notices
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides
information regarding proper grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors, location of discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
1.3
Surveillance Cabinet Important Safety Instructions | en 5
Bosch Security Systems Installation manual 2017.09 | v1.0 | F.01U.250.239
Disposal - Your Bosch product was developed and manufactured with high-
quality material and components that can be recycled and reused. This symbol
means that electronic and electrical appliances, which have reached the end of
their working life, must be collected and disposed of separately from
household waste material. Separate collecting systems are usually in place for
disused electronic and electrical products. Please dispose of these units at an
environmentally compatible recycling facility, per European Directive
2002/96/EC
Environmental statement - Bosch has a strong commitment towards the environment. This
unit has been designed to respect the environment as much as possible.
Power lines: An outdoor system should not be located in the vicinity of overhead power lines,
electrical lights, or power circuits, or where it may contact such power lines or circuits. When
installing an outdoor system, extreme care should be taken to keep from touching power lines
or circuits, as this contact may be fatal. U.S.A. models only - refer to the National Electrical
Code Article 820 regarding installation of CATV systems.
SELV - All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits
should only be connected to other SELV circuits.
Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the
SELV circuit to the Telephone Network Voltage (TNV) circuits.
System ground/Safety ground
System (video) ground is indicated by the symbol .
Safety (power) ground is indicated by the symbol .
The system ground is only used to comply with safety standards or installation practices in
certain countries. Bosch does not recommend connecting system ground to safety ground
unless it is explicitly required. However, if the system ground and safety ground are connected
and grounding loops are causing interference in the video signal, use an isolation transformer
(available separately from Bosch).
!
Caution!
Connecting System ground to Safety ground may result in ground loops that can disrupt the
CCTV system.
UL certification
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL
2044. UL Certification does not cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED
FUNCTIONS OF THIS PRODUCT.
1.4
6en | Important Safety Instructions Surveillance Cabinet
2017.09 | v1.0 | F.01U.250.239 Installation manual Bosch Security Systems
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL
60950-1. UL Certification does not cover the performance or reliability of the security or
signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED
FUNCTIONS OF THIS PRODUCT.
Bosch notices
Video loss
Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be
held liable for any damage that results from missing video information. To minimize the risk of
lost digital information, Bosch Security Systems recommends multiple, redundant recording
systems, and a procedure to back up all analog and digital information.
Copyright
This manual is the intellectual property of Bosch Security Systems and is protected by
copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
Note:
This manual has been compiled with great care and the information it contains has been
thoroughly verified. The text was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the user guide can change without
notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user guide and the product
described.
More information
For more information please contact the nearest Bosch Security Systems location or visit
www.boschsecurity.com
1.5
Surveillance Cabinet Important Safety Instructions | en 7
Bosch Security Systems Installation manual 2017.09 | v1.0 | F.01U.250.239
Unpacking
– This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
– Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative.
– Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
– The original packing carton is the safest container in which to transport the unit and must
be used if returning the unit for service. Save it for possible future use.
Parts list
The following table lists the parts included with this mounting package.
Description Part Number
Surveillance cabinet without transformer (24 VAC) NDA-U-PA0
Surveillance cabinet with 120 VAC transformer NDA-U-PA1
Surveillance cabinet with 230 VAC transformer NDA-U-PA2
Optional mounting accessories
This table shows the optional parts you may need for attaching a Surveillance cabinet to a
wall, a corner, or a pole.
Mounting Options Part Number
Pendant wall mount NDA-U-WMT
Corner mount adapter NDA-U-CMT
Pole mount adapter large NDA-U-PMAL
Fiber optic Ethernet media converter kit VG4-SFPSCKT
Description
This chapter describes the installation of a Surveillance cabinet to a wall, a corner, or a pole.
Use one of the accessories from Optional Mounting Accessories for correct mounting. Any
variations to the installation procedures are noted.
Only the connections in the unit for power supply are used. You can connect all other wires
directly with the connectors on the wires. The unit is a safe, robust and watertight box in
which you can make your connections.
Note: You may need to purchase additional mounting accessories for corner and pole mount
applications. Refer to Optional Mounting Accessories.
Tools required
– 5 mm Allen wrench (supplied)
– Small, straight-blade screwdriver - 2.5 mm (0.1 in.)
– No. 2 Phillips screwdriver
– Socket wrench and 9/16-in. socket
– Banding tool (Bosch P/N TC9311PM3T) - if installing a mast (pole) mount
2
2.1
2.2
2.3
2.4
8en | Unpacking Surveillance Cabinet
2017.09 | v1.0 | F.01U.250.239 Installation manual Bosch Security Systems
– 3/4 in. (20-mm) NPS right angle conduit connector - if installing a mast (pole) mount with
a VG4-ARM-WPLATE
Surveillance Cabinet Unpacking | en 9
Bosch Security Systems Installation manual 2017.09 | v1.0 | F.01U.250.239
Installing the Surveillance cabinet
Pre-installation checklist
1. Make sure that you have the correct camera and accessories for the installation in your
environment.
2. Determine the location and distance for the unit based on its voltage and current
consumption. Prepare the wires and connections that are necessary to connect your
camera.
3. You can route the main power supply through an intermediate unit (type PA1 or PA2)
before connecting the power to a PA0 type unit. Refer to Cable and wire standards for
wiring information and distances. See also Routing power through intermediate unit, page
14.
4. Use only UL listed liquid tight strain reliefs for conduits to the unit to ensure that water
cannot enter the unit. Use water tight conduits and fittings to meet NEMA 4 standards.
!
Caution!
Select a rigid mounting location to prevent too much vibration to the camera.
!
Warning!
Power and I/O cabling must be routed separately inside different permanently earthed metal
conduits.
!
Warning!
Install external interconnecting cables in accordance to NEC, ANSI/NFPA70 (for US
application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN application) and in
accordance to local country codes for all other countries.
Branch circuit protection incorporating a 20 A, 2-pole Listed Circuit Breaker or Branch Rated
Fuses are required as part of the building installation. A readily accessible 2-pole disconnect
device with a contact separation of at least 3 mm must be incorporated.
3
3.1
10 en | Installing the Surveillance cabinet Surveillance Cabinet
2017.09 | v1.0 | F.01U.250.239 Installation manual Bosch Security Systems
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Bosch Sicherheitssystem Handbücher
Bosch
Bosch Solution 64 Bedienungsanleitung
Bosch
Bosch APC-AMC2-4W Bedienungsanleitung
Bosch
Bosch AP1-T Bedienungsanleitung
Bosch
Bosch MIC-WKT-IR Bedienungsanleitung
Bosch
Bosch DIP-7040-00N Bedienungsanleitung
Bosch
Bosch LTC 8016/90 Bedienungsanleitung
Bosch
Bosch AMAX panel 4000 Bedienungsanleitung
Bosch
Bosch AMAX 2100 Gebrauchsanweisung
Bosch
Bosch ND 200 LSN Bedienungsanleitung
Bosch
Bosch ISW-BMC1-S135X Bedienungsanleitung
Bosch
Bosch FMM-100 Series Bedienungsanleitung
Bosch
Bosch Security Systems Bedienungsanleitung
Bosch
Bosch Plena Power Amplifier Bedienungsanleitung
Bosch
Bosch Divar Bedienungsanleitung
Bosch
Bosch MAP 5000 Series Bedienungsanleitung
Bosch
Bosch AMAX panel 2000 ICP-AMAX-P Bedienungsanleitung
Bosch
Bosch ISC-BDL2-WP12 Bedienungsanleitung
Bosch
Bosch DIVAR IP 7000 2U Bedienungsanleitung
Bosch
Bosch LTC 5136/61 Bedienungsanleitung
Bosch
Bosch PRAESENSA Anleitung zur Verwendung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung