Bosch BCC100 Bedienungsanleitung
Bosch Connected Control
BCC 100 Thermostat Quick Start Guide
Bosch Connected Control
BCC100 Thermostat Quick Start Guide
boschheatingandcooling.com
Quick Start Guide
For 24V-AC Thermostat Wiring
IN THE BOX
▶BCC-100 Wi-Fi
Thermostat
▶Two screws
and anchors
▶Flathead screwdriver
▶Wire labels
▶Jumper wire
▶Quick start guide
Warning: Failure to
follow and read all
instructions before
installing or
operating this
device may cause
personal injury and/
or property damage.
C-wire or (24Vac) required to power the thermostat.
Some features require
an internet connection
and a user account.
Features, specifications,
and appearance are
subject to change
without notice.
CHECK COMPATIBILITY FIRST
For conventional (gas/oil/electric) ▶Heat Only ▶Cool Only
For heat-pump systems ▶Up To 4-Heat & 2-Cool
Getting Started
Bosch BCC-100 thermostat is designed to work on most
24Vac low voltage heating and cooling systems such as
gas and oil furnaces, heat pumps, and single or
dual-stage systems.
Professional installation recommended for:
▶Separate humidifiers and dehumidifiers
Turn Power Off
Please turn off the unit’s main power at the circuit panel
before beginning the installation process.
POWER OFF WARNING
Failure to turn off power may result in
electrical shock and/or system damage.
Remove the Old Thermostat
Before removing the wires from the thermostat or wall
plate, take a photo of all wires for reference, then label
each wire according to the terminal codes.
Disconnect the wires from the old thermostat one by one.
Do not let wires fall back into the wall. Remember, the
power to your HVAC system must be turned off.
1
Note: After labeling the wires, we recommend
securing them to an object such as a pen or clip to
prevent them from falling back into the wall.
Connect the New Wall Plate
Insert all wires vertically from the open socket into the
proper terminal. Ensure that each wire is inserted into the
matching terminal. Use the supplied flathead screwdriver
to fasten each wire. Pull wires gently to ensure wires are
securely fastened.
2
WARNING: Use caution when securing and routing
wires to prevent possible shortage to adjacent terminals.
KEY
Rc Power Cooling W/E 1st Stage Heating
Emergency heat activated at W1
R/h Power Heating W2 2nd Stage Heating
Auxiliary heat activated at W2
CCommon O/B Reverse Valve
GFan H/Dh (De) Humidifier
Y1st Stage Cooling Data (Only to be used with Bosch WSHP)
Y2 2nd Stage Cooling Jump Wire
Conventional Heating
(2 Stages) / Cooling System
(2 Stages) with humidifier
Install a jumper between R/h
and Rc only if a single
transformer is used for
heating and cooling.
Otherwise connect the
heating transformer to R/h
and/or the cooling
transformer to Rc.
-
G
W2
Y2
O/B
H/Dh
Data
C
W/E
Y
R/h
Rc
Thermostat Conventional Heating /
Cooling system without
the C or spare wire (also
commonly called a 4-wire
system)
▶At the unit, connect C
with the G wire
▶Connect Y to G
-
G
W2
Y2
O/B
H/Dh
Data
C
W/E
Y
R/h
Rc
Thermostat
-
G
W2
Y2
O/B
H/Dh
Data
C
W/E
Y
R/h
Rc
Thermostat
Conventional Heating /
Cooling System
with C wire
The following are wiring diagrams for common systems:
Heat Pump 4 Heat/ 2 Cool
with Dehumidifier
▶Connect Rc to R/h
-
G
W2
Y2
O/B
H/Dh
Data
C
W/E
Y
R/h
Rc
Thermostat
Heat Pump 3 Heat / 2 Cool
▶Connect Rc to R/h
▶Connect W to W2 to
operate both stages of
electric heat at the
same time
-
G
W2
Y2
O/B
H/Dh
Data
C
W/E
Y
R/h
Rc
Thermostat
Heat Pump 2 Heat /
1 Cool
▶Connect Rc to R/h
-
G
W2
Y2
O/B
H/Dh
Data
C
W/E
Y
R/h
Rc
Thermostat
Mount the New Wall Plate
Use the enclosed screws and anchors to
mount the new wall plate. In most cases,
you can utilize the same mounting position of your old
thermostat. Be sure to check the alignment of your wall
plate before installation.
3
Attach Bosch BCC-100 to the Wall
First align the two
clips on the back of
the Bosch BCC-100
into the corresponding
slots on the top of the
wall plate.
4
Firmly press forward
until you hear a click to
secure the thermostat
into position.
1
2
PUSH
CLIPS
Ensure the C-wire (if used) is properly connected to the
heating and cooling equipment and thermostat. Switch
the power back on for the heating/cooling system at the
main switch box.
Your thermostat should power on and prompt you to start
the setup. If you are having trouble powering the
thermostat, please refer to boschheatingandcooling.com
for additional support.
Thank you for choosing the BCC100. Enjoy the savings
and comfort of owning a Bosch connected thermostat!
Main Screen
System
Mode
Main Menu Fan
Status Wifi / Cloud Access
Indicator
Current
Room
Humidity Current Room
Temperature
Current
Schedule
Adjust
Temperature
Power On and Enjoy!
5
1. Heating Type
Select your home’s heating
type from the options
available:
▶Gas/Oil/Propane
▶Heat Pump
▶Electric
▶No Heating
For a quick and easy way to begin using your new smart
thermostat, the device will automatically direct you to the
Initial Setup screen once it’s turned on for the first time.
Heat Pump System?
Configure the
reversing valve for O
(energized in cool)
or B (energized in
heat).
Please check your heating and cooling system manual or
consult a professional HVAC technician if you do not know
which option to select.
Initialization
2. Date, Time
ON DEVICE: Please enter your location’s current date and
time; once the device is registered or linked to a user
account, the date and time on the device will
automatically update to the current time associated with
the user account.
APP: The date and time for the device, as well as the user
account, will automatically update by selecting the time
zone for the device.
3. Wi-Fi Setup
A reliable Wi-Fi connection is required in order to access
smart features such as remote access, weather forecast
and more. Please follow on-screen instructions
to complete the Wi-Fi setup.
After a successful connection, the “Registration” screen
will be shown. Please follow the instructions on the
screen to complete the setup. You can now add the device
to a user account after downloading the App and setting
up an account.
Andere Handbücher für BCC100
4
Inhaltsverzeichnis
Andere Bosch Thermostat Handbücher
Bosch
Bosch CR 11 Bedienungsanleitung
Bosch
Bosch Smart Home Thermostat AA Bedienungsanleitung
Bosch
Bosch BCC100 Bedienungsanleitung
Bosch
Bosch TRZ 12 T Bedienungsanleitung
Bosch
Bosch BCC100 Bedienungsanleitung
Bosch
Bosch TSTBM3H2CPH6W-A Bedienungsanleitung
Bosch
Bosch BMS-WT1 Series Bedienungsanleitung
Bosch
Bosch TRZ 12-2 Bedienungsanleitung
Bosch
Bosch FW 100 Bedienungsanleitung
Bosch
Bosch FR 10 Bedienungsanleitung
Bosch
Bosch Room thermostat II Bedienerhandbuch
Bosch
Bosch CR 20 RF Bedienungsanleitung
Bosch
Bosch OR30 OT Bedienungsanleitung
Bosch
Bosch Worcester Greenstar Comfort II RF Bedienungsanleitung
Bosch
Bosch Worcester Easy control Bedienungsanleitung
Bosch
Bosch BCC100 Service-Handbuch
Bosch
Bosch EasyControl Bedienungsanleitung
Bosch
Bosch CR 50 Bedienungsanleitung
Bosch
Bosch BCC50 Montageanleitung
Bosch
Bosch Climate 5000 Series Bedienungsanleitung
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
