Bosch Rexroth A10VG Bedienungsanleitung

Instruction manual

RE 92750-01-B/06.2018

Replaces: 02.10

English

Axial piston variable pump

A10VG

Series 10

also regarding any disposal, exploitation,

reproduction, editing, distribution, as well as in

the event of applications for industrial property

rights.

The data speciﬁed within only serves

to describe the product. No statements

concerning a certain condition or suitability

for a certain application can be derived from

our information. The information given does

not release the user from the obligation of

own judgment and veriﬁcation. It must be

remembered that our products are subject to a

natural process of wear and aging.

The cover shows an example application. The

product delivered may diﬀer from the image on

the cover.

The original instruction manual was created in

the German language.

Contents 3/64

RE 92750-01-B/06.2018, A10VG, Series 10, Bosch Rexroth AG

1 About this documentation 5

1.1 Applicability 5

1.2 Required and supplementary documentation 5

1.3 Representation of information 6

1.3.1 Safety instructions 6

1.3.2 Symbols 7

1.3.3 Designations 7

1.3.4 Abbreviations 8

2 Safety instructions 9

2.1 About this chapter 9

2.2 Intended use 9

2.3 Improper use 9

2.4 Personnel qualiﬁcations 10

2.5 General safety instructions 11

2.6 Product-speciﬁc safety instructions 12

2.7 Personal protective equipment 15

3 General notices regarding property and product damage 16

4 Scope of delivery 19

5 About this product 20

5.1 Performance description 20

5.2 Product description 20

5.2.1 Axial piston unit layout 20

5.2.2 Functional description 21

5.3 Bypass function 22

5.3.1 Activating and deactivating the bypass function 22

5.4 Product identiﬁcation 24

6 Transport and storage 25

6.1 Transporting the axial piston unit 25

6.1.1 Transporting by hand 25

6.1.2 Transporting with a lifting device 25

6.2 Storing the axial piston unit 27

7 Installation 29

7.1 Unpacking 29

7.2 Installation conditions 29

7.3 Installation position 31

7.3.1 Below-reservoir installation (standard) 32

7.3.2 Above-reservoir installation 33

7.4 Installing the axial piston unit 34

7.4.1 Preparation 34

7.4.2 Dimensions 35

7.4.3 General instructions 35

7.4.4 Installation with a coupling 36

7.4.5 Installation on a gearbox 36

7.4.6 Installation with cardan shaft 37

7.4.7 Completing installation 37

Contents

4/64

Bosch Rexroth AG, Series 10 A10VG, RE 92750-01-B/06.2018

7.4.8 Changing the lever position of the HW control 39

7.4.9 Changing the lever position of the DA control valve (size 28 to 63) 39

7.4.10 Hydraulically connecting the axial piston unit 40

7.4.11 Electrically connecting the axial piston unit 45

7.5 Performing ﬂushing cycle 46

8 Commissioning 47

8.1 Initial commissioning 47

8.1.1 Filling the axial piston unit 48

8.1.2 Testing the hydraulic fluid supply 49

8.1.3 Performing a functional test 49

8.2 Running-in phase 50

8.3 Recommissioning after standstill 50

9 Operation 51

10 Maintenance and repair 51

10.1 Cleaning and care 51

10.2 Inspection 52

10.3 Maintenance 52

10.4 Repair 53

10.5 Spare parts 53

11 Removal and replacement 54

11.1 Required tools 54

11.2 Preparing for removal 54

11.3 Removal 54

11.4 Preparing components for storage or further use 54

12 Disposal 55

13 Extension and conversion 55

14 Troubleshooting 56

14.1 How to proceed for troubleshooting 56

14.2 Malfunction table 57

15 Technical data 61

16 Alphabetical index 62

Contents

About this documentation 5/64

RE 92750-01-B/06.2018, A10VG, Series 10, Bosch Rexroth AG

1 About this documentation

1.1 Applicability

This documentation applies to the following products:

•Axial piston variable pump A10VG Series 10

This documentation is intended for machine/system manufacturers, assemblers and

service engineers.

It contains important information on the safe and appropriate transport, installation,

commissioning, operation, maintenance, removal and simple troubleshooting of the

axial piston unit.

▶ Read this documentation completely, in particular chapter 2 “Safety instructions”

on page 9 and chapter 3 “General notices regarding property and product

damage” on page 16 before you start work with the axial piston unit.

1.2 Required and supplementary documentation

▶ Only commission the axial piston unit if the documentation marked with the book

symbol is available to you and you have understood and observed it.

Table 1: Required and supplementary documentation

Title Document number Document type

Order conﬁrmation

Contains the order-related technical data for your axial piston variable pump

A10VG.

– Order conﬁrmation

Installation drawing

Contains the outer dimensions, all ports and the hydraulic circuit diagram for your

axial piston variable pump A10VG.

Please request the

installation drawing

from your contact

at Bosch Rexroth.

Installation drawing

Axial piston variable pump A10VG

Contains the permissible technical data.

92750 Data sheet

Mineral oil-based hydraulicﬂuids and related hydrocarbons

Describes the requirements on a mineral oil-basedhydraulic ﬂuid and related

hydrocarbons for operation with Rexroth hydraulic components and assists you in

selecting a hydraulic ﬂuid for your hydraulic system.

90220 Data sheet

Environmentally acceptable hydraulic ﬂuids

Describes the requirements on an environmentally acceptable hydraulic ﬂuid

for operation with Rexroth hydraulic components and assists you in selecting a

hydraulic ﬂuid for your hydraulic system.

90221 Data sheet

Fire-resistant, water-free hydraulic ﬂuids (HFDR/HFDU)

Describes the requirements on ﬁre-resistant, anhydrous hydraulic ﬂuids (HFDR/

HFDU) for operation with Rexroth hydraulic components and assists you in

selecting a hydraulic ﬂuid for your hydraulic system.

90222 Data sheet

Axial piston units for operation with ﬁre-resistant hydraulic ﬂuids – anhydrous,

hydrous (HFDR, HFDU, HFA, HFB, HFC)

Describes the requirements on ﬁre-resistant, anhydrous and hydrous hydraulic

ﬂuids (HFDR, HFDU, HFA, HFB, HFC) and contains the technical data for operation

with Rexroth hydraulic components.

90225 Data sheet

Component class: 92003-CC-0011_ETPump

The component class speciﬁcation explains what data is available, how this data

was obtained, and what else should be observed.

92003-CC-0011_

ETPump

Component class

speciﬁcation

BODAS-drive eDA application software

BODAS-drive eDA is a software solution integrated in the Rexroth SRC-eDA1/31

control unit for controlling the hydrostatic drive train in wheeled vehicles.

95315 Data sheet

6/64 About this documentation

Bosch Rexroth AG, Series 10 A10VG, RE 92750-01-B/06.2018

Table 1: Required and supplementary documentation

Title Document number Document type

Information on the use of hydrostatic drives at low temperatures

Contains additional information on the use of Rexroth axial piston units at low

temperatures.

90300-03-B Manual

Storage and preservation of axial piston units

Contains additional information on storage and preservation.

90312 Data sheet

1.3 Representation of information

Standardized safety instructions, symbols, terms and abbreviations are used

throughout this documentation so that you can work quickly and safely with your

product. For clariﬁcation, they are explained in the sections below.

1.3.1 Safety instructions

This documentation contains safety instructions in chapter 2.6 “Product-speciﬁc

safety instructions” on page 12 and in chapter 3 “General notices regarding

property and product damage” on page 16, as well as before a sequence of

actions or an instruction for action involving a risk of personal injury or property

damage. Always follow the instructions on avoiding the dangers associated with the

use of this product.

Safety instructions are set out as follows:

SIGNAL WORD

Type and source of danger!

Consequences of noncompliance

▶ Measures to prevent danger

•Warning sign: draws attention to the danger

•Signal word: identiﬁes the degree of the danger

•Type and source of danger: indicates the type and source of the danger

•Consequences: describes what occurs if safety instructions are disregarded

•Precautions: states how the danger can be avoided

Table 2: Danger classes as deﬁned in ANSI Z535.6

Warning sign, signal word Meaning

DANGER Identiﬁes a dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING Identiﬁes a dangerous situation that may result in death or

serious injury if it is not avoided.

CAUTION Identiﬁes a dangerous situation that may result in minor to

moderate injury if it is not avoided.

NOTICE Property damage: The product or surrounding area may be

damaged.

About this documentation 7/64

RE 92750-01-B/06.2018, A10VG, Series 10, Bosch Rexroth AG

1.3.2 Symbols

The following symbols indicate information that is not safety-relevant but increases

understanding of the documentation.

Table 3: Meaning of symbols

Symbol Meaning

If this information is disregarded, the product cannot be used and/or

operated to its full extent.

▶ Single, independent action

Numbered instruction:

The numbers indicate that the actions must be completed in order.

1.3.3 Designations

This documentation uses the following designations:

Table 4: Designations

Designation Meaning

A10VG Axial piston variable pump, closed circuit

Threaded plug Metal screw, pressure-resistant

Protective plug Made out of plastic, not pressure-resistant, only for transportation

As umbrella term for “axial piston variable pump A10VG” the designation

“axial piston unit” will be used in the following.

8/64 About this documentation

Bosch Rexroth AG, Series 10 A10VG, RE 92750-01-B/06.2018

1.3.4 Abbreviations

This documentation uses the following abbreviations:

Table 5: Abbreviations

Abbreviation Meaning

ATEX EC directive on explosion protection (Atmosphère explosible)

DA Automatic control, hydraulic, speed related

DG Hydraulic control, directly operated

DIN Deutsches Institut für Normung (German Institute for Standardization)

EP Proportional control, electric

ET Electric control, direct operated with two pressure reducing valves (DRE)

EZ Two-point control, electric

HD Hydraulic control, pilot-pressure related

HW Hydraulic control, mechanical servo

ISO International Organization for Standardization

RE Rexroth document in the English language

VDI2230 Standard for the systematic calculation of heavy-duty threaded connections

and cylindrical screw joints from the VDI (VereinDeutscherIngenieure -

Association of German Engineers)

Safety instructions 9/64

RE 92750-01-B/06.2018, A10VG, Series 10, Bosch Rexroth AG

2 Safety instructions

2.1 About this chapter

The axial piston unit has been manufactured to generally accepted engineering

standards. There is still, however, a risk of personal injury or property damage if this

chapter and the safety instructions in this documentation are not observed.

▶ Read this documentation completely and thoroughly before working with the axial

piston unit.

▶ Keep it in a location where it is accessible to all users at all times.

▶ Always include the required documentation when you pass the axial piston unit

on to third parties.

2.2 Intended use

Axial piston units are hydraulic components, meaning that in their application

area they are classiﬁed neither as complete nor as partly completed machinery as

deﬁned in the EC Machinery Directive (2006/42/EC). The component is exclusively

intended to form partly completed machinery or complete machinery together with

other components. The component should only be commissioned after it has been

installed in the machine/system for which it is intended and the safety of the entire

system has been established in accordance with the Machinery Directive.

This product is intended for the following use:

The axial piston unit is only approved as a pump for hydrostatic drives in closed

circuit.

▶ Observe the technical data, the application and operating conditions and

the performance limits as speciﬁed in data sheet92750 and in the order

conﬁrmation. Information about approved hydraulic ﬂuids can be found in data

sheet 92750.

The axial piston unit is only intended for commercial use and not for private use.

Intended use includes having fully read and understood this documentation,

especially chapter 2 “Safety instructions” on page 9.

2.3 Improper use

Any use other than that described as intended use is considered improper.

Bosch Rexroth AG is not liable for damages resulting from improper use. The user is

solely responsible for any risks arising from improper use.

The following foreseeable misuses are also considered improper (this list is not

exhaustive):

•Use outside the operating parameters approved in the data sheet or in the order

conﬁrmation (unless speciﬁcally approved by the customer)

•Use of non-approved ﬂuids, e.g., water or polyurethane components

•Changes to factory settings by unauthorized persons

•Use of assembled parts (e.g., attachment ﬁlter, control unit, valves) other than

speciﬁed Rexroth components

•Use of the axial piston unit with assembled parts under water at a depth of

more than 10meters without the necessary additional measures, e.g. pressure

equalization. Units with electrical components (e.g., sensors) generally cannot

come into contact with water.

10/64 Safety instructions

Bosch Rexroth AG, Series 10 A10VG, RE 92750-01-B/06.2018

•Use of the axial piston unit under a continuous pressure diﬀerential between

housing and ambient pressure greater than 2bar, with the ambient pressure always

lower than the case pressure. Momentary (t<0.1s) pressure peaks of up to 10bar

are allowed, but no more than 1000 pressure peaks over the entire service life.

Beyond this, the maximum permissible case pressure speciﬁed in the data sheet

should not be exceeded.

•Use of the axial piston unit in explosive environments unless the component or

machine/system has been certiﬁed as compliant with the ATEX directive 2014/34/EC

•Use of the axial piston unit in a corrosive atmosphere

•Use of the axial piston unit in aircraft or spacecraft

2.4 Personnel qualiﬁcations

The activities described in this manual require a basic understanding of mechanics,

electricity and hydraulics, as well as familiarity with associated technical terms.

For transporting and handling the product, additional familiarity with the use of

lifting devices and lifting accessories is required. In order to ensure safe use, these

activities should only be performed by skilled personnel or an instructed person

under the direction and supervision of skilled personnel.

Skilled personnel refers to persons who possess the professional training,

knowledge and experience, as well as the understanding of the regulations relevant

to the work to be done that are necessary to recognize possible hazards and take

the appropriate safety measures. Skilled personnel must follow the rules relevant to

their ﬁeld and have the necessary hydraulics expert knowledge.

Hydraulic expert knowledge includes:

•Being able to read and fully understand hydraulic circuit diagrams

•In particular, fully understanding the relationships with regard to safety devices

•Understanding how hydraulic components work and are put together.

Bosch Rexroth oﬀers training support for specialized ﬁelds. An overview of the

training contents can be found online at: www.boschrexroth.com/training.

Andere Handbücher für Rexroth A10VG

Inhaltsverzeichnis

Andere Bosch Wasserpumpe Handbücher

Bosch

Bosch GardenPump 18 Bedienungsanleitung

Bosch

Bosch Rexroth 3 Series Bedienungsanleitung

Bosch

Bosch rexroth A21VG 10 Series Bedienungsanleitung

Bosch

Bosch 2 609 390 308 Bedienungsanleitung

Bosch

Bosch 0 986 580 943 Bedienungsanleitung

Bosch

Bosch VPV 16 Installations- und Betriebsanleitung

Bosch

Bosch Rexroth Sytronix MPA01 Bedienungsanleitung

Bosch

Bosch VP44 Bedienungsanleitung

Bosch

Bosch GardenPump 18 Bedienungsanleitung

Bosch

Bosch rexroth 11 Series Bedienungsanleitung

Bosch

Bosch Universal Pump 18V Bedienungsanleitung

Bosch

Bosch Rexroth A4CSG 30 Series Bedienungsanleitung

Bosch

Bosch Rexroth A10VOH145 60 Series Bedienungsanleitung

Bosch

Bosch Rexroth DBA 2X E Series Bedienungsanleitung

Bosch

Bosch rexroth 60 Series Bedienungsanleitung

Bosch

Bosch UP 15 Bedienungsanleitung

Bosch

Bosch Rexroth 63 Series Bedienungsanleitung

Bosch

Bosch Rexroth 32 Series Einrichtungshandbuch

Bosch

Bosch rexroth 10 Series Bedienungsanleitung

Bosch

Bosch VPV 16 Installations- und Betriebsanleitung

Bosch

Bosch Rexroth Sytronix SvP 70 Series Bedienungsanleitung

Bosch

Bosch 0 986 580 B25 Bedienungsanleitung

Bosch

Bosch A4VG A4VG 32 Series Bedienungsanleitung

Bosch

Bosch Rexroth 31 Series Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung