Boyo VTW73M Bedienungsanleitung
Car Rear View Mirror Monitor
With 7.3 Inch Wide LCD Display Screen
USER MANUAL
1. Frozen: When the image is frozen or can't connect, please restart the mirror monitor. This is usually due to the older
mobile phones with weak CPU computing power, slow video delivery to the mirror.
2. Trimmed: Some mobile phones send image outputs at higher resolutions than the display resolution of the mirror
monitor. The portions of the image, exceeding the display area of the mirror will be trimmed.
5. How Do I: This monitor is like a TV with a screencast receiver and how each mobile phone connects may vary. How
to send video to a TV by different mobile phones can be searched from Google.
6. Distracted Driving: It is dangerous and prohibited to watch the video or stream the phone while driving. Enjoy video
streaming on the mirror while parked.
4. FM Reset: When arriving in a new city, you may need to nd the FM frequency with no broadcast signal and re-adjust
the FM transmission frequency of the mirror.
3. Larger Than Real: When this product is used in a caravan or a large truck, the displayed objects may appear larger
and closer. Objects are relative to the distance from the camera, not from the driver.
NOTED:
Vision Tech America, Inc.
1452 E. Valencia Dr.,
Fullertion, CA 92831
Tel: 888-941-3060
For technical support contact 888-941-3060 or email
[email protected] WWW.VISIONTECHAMERICA.COM
CONTENTS FEATURES
SPECIFICATIONS
Screen size: 7.3 inch
Screen resolution: 1280(H)*390(V)
Signal system: PAL/Auto/NTSC, CVBS/AHD
Display screen: TFT-LCD
7.3 inch wide LCD display screen
2 x AHD /CVBS analog video inputs
Backup camera display
Adjustable backup guidelines OEM replaceable bracket
Automatic brightness adjustment
Android OS and iOS MiraCast ReceiverTouch screen button
Working voltage: DC 10V-DC 16V
Working temperature: -20OC~+65OC
3142
HOW TO INSTALL REVERSE CAMERA
When a camera needs to be installed at the rear of vehicle, a good position is usually at the top of the license plate
where there is an under ledge.
1BAM 2XX
B
AM 2X
License plate
Camera
Rear view mirror monitor
The package contains the following:
1. Rearview mirror monitor 2. Kits 3. User manual
For the items listed above, please check the package contents. If any parts are damaged or missing, please
contact the retailer as soon as possible.
5. Adapter cable x24. Wire Harness 6. User manual for bracket
2
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Car factory original mirror The plate on the windshield
CAUTION!
NOTE: Always use caution. Please seek help from trained and qualified professionals if you are not comfortable
with the removal or installation of the mirror.
Dangerous OK
Windshield
Windshield
Dangerous OK
1. 2.
Different cars have different brackets. Learn how to
remove before actually removing the mirror.
DO NOT use force to remove or to mount. Use proper
tools and techniques.
The manufacturer will not be responsible for injuries,
or broken windshields, or any other damages.
Install mirror monitor on the plate
Install rear view mirror along this directionTake down your original mirror, and make
the mirror monitor ready
windshield
Please make sure to install the mirror to
the end of the bottom without any loose
Contrarotate the xed rear view mirror
Torque is about 0.8-1.3 N.m
windshield
windshield
344
3 45 6
How to install wire harness, wire cover, cable cover and connector cable on the mirror?
HOW TO WIRE
NOTE: The pictures may not
match your product, they
are for illustration purposes
only.
Black to GND
Red to ignition +12V
V2trigger
V1- AHD /Analog backup camera
V2- AHD or Analog video/camera
V1trigger-green to backup light positive
BASIC OPERATING INSTRUCTIONS
1. Non-trigger state: Switch among different video channels 2. Menu setting state: Parameter down
4. Menu setting state: Parameter up 5. Menu setting state: Select
6. Light sensor 7. Turn on /off the display screen
8. Indicator light: turn on automatically when the screen is off/ turn off when the screen is on
MENU SETTING
When the rearview mirror is in the non-triggered state, short press “ ” to enter into “menu setting” interface.
you can switch among “PICTURE”, “SYSTEM”, “SETUP” or enter out.
Press “ ” to switch among the items. “ ” and “ ” are to change the gure of each setting.
3 47 8
1 6
3
7 8245
3. Non-trigger state: short press to enter into “menu setting” interface
Reversing state: long press to enter into “backup guideline” setting
{
short press to enter into “menu setting” interface
System
Setup
Picture Scale
Preset scale
Preset menu
FACTORY SETTING
OFF
OFF
OFF
Note: “CH” button will switch between Miracast screen and the channels with a video input.
7
This is a special device to project your mobile phone to rear view mirror monitor through Wi-Fi connection.
MIRACAST
3 49 10
How to connect with Android phone
How to connect with iPhone
1.Find the "Smart View" in your phone,
click to enter;
1. Turn on WiFi in your phone to
connect the rearview mirror,
(ID: AnyCast-XXXXXX) and enter
initial password: 12345678;
2. Find the “Screen Mirroring”
in your phone, click to enter;
Click "AnyCast-XXXXXX", wait a few seconds, when the
rearview mirror and the mobile phone are connected
successfully, the screen of the mobile phone will be
projected on the rearview mirror screen.
3. Click "AnyCast-XXXXXX", wait a
few seconds, when the rearview
mirror and the mobile phone are
connected successfully, the
screen of the mobile phone will
be projected on the rearview
mirror screen.
3 411 12
When the car is in reverse, the monitor will automatically display back up camera.
BACK UP CAMERA DISPLAY
The brightness of screen varies with ambient light, thereby, to make driver get a clear and comfortable image when
reversing.
When ambient light is weak, the screen will automatically reduce the brightness and get better vision.
When ambient light is strong, the screen will automatically increase the brightness and get better vision.
WEAK LIGHT
STRONG LIGHT
AUTOMATIC BRIGHTNESS ADJUSTMENT
System
Setup
Picture Mirror
FM
FM RADIO
FACTORY SETTING
OFF
OFF
100.0MHZ
When the rearview mirror and the mobile phone are connected successfully, the sound (such as navigation, music
playback) in the mobile phone will be transmitted from the rearview mirror speaker. For better quality of sound, you can
use the car's speakers by following steps:
1. The car has Bluetooth: Connect your phone's Bluetooth to the car's Bluetooth.
2. The car has FM radio: Broadcast from the mirror to FM radio.
(1) Turn on the FM radio and tune to silent frequency (frequency without radio station);
(2) Short press the " " button of the rearview mirror and continue to press the " " button to switch to "SETUP", press the
" " button to select “FM RADIO”, press the " " and " " buttons to adjust the frequency to the same blank frequency as the
car FM.
ADJUSTABLE GUIDE LINE
About guide line
What the regular guide line is
3m
1m
2m
0.4m
MXT.71D
Generally, to help drivers estimate the
distance from obstacles, there are three
lines for reference -red, yellow and
green.Those lines are displayed on the
monitor when reversing. The green line
is 3m away from the back of car and the
yellow line is 2m. The distant red line
is1m away from the backside of car
while the closed red line is 0.4m. Both
reference lines on the left and right
should leave 0.2m from the car.
Regular guide line is xed. But installation sites of cameras
are different as well as car size. The xed guide line is not
accurate enough for drivers. There is a great difference
among regular and xed guide lines and car's real guide
lines, especially when camera is mounted on the left or
right side of car backside.
3m
2m
1m
How to adjust the guide line
R
Display on the monitor
L
Right position Wrong position
According to the site of standard reference line, we
can put references such as desks in the back side of
the car. Compared with the marked references, we
can adjust the sites and angles of two guide lines
displayed on the monitor. You will get the accurate
and safety guide lines once it coincides with the
references.
Short press: switch to next item
Long press: save the setting and exit
Reversing state: Long press“ ” to enter “guide line adjustment” mode. The system is defaulted to adjust left guide
line rst.
XL: 227 YL: 218 NUM_L: 17
XR: 806 YR: 218 NUM_R: 18
Decrease Increase
Short press: switch to next item
Long press: save the setting and exit
XL: 227 YL: 218 NUM_L: 17
XR: 806 YR: 218 NUM_R: 18
Clockwiseanticlockwise
3 413 14
Andere Handbücher für VTW73M
1
Inhaltsverzeichnis
Andere Boyo Autozubehör Handbücher
Boyo
Boyo VTL17LTJ Bedienungsanleitung
Boyo
Boyo VTM43FL Bedienungsanleitung
Boyo
Boyo VTM43ML Bedienungsanleitung
Boyo
Boyo Keyfree Touch Bedienungsanleitung
Boyo
Boyo VTR50M Bedienungsanleitung
Boyo
Boyo VTC461R Bedienungsanleitung
Boyo
Boyo VTB44MCP-CR Bedienungsanleitung
Boyo
Boyo Carrobot C2-Lite Bedienungsanleitung
Boyo
Boyo VTM73FL Bedienungsanleitung
Boyo
Boyo VTM96M Bedienungsanleitung
Boyo
Boyo VTC702R Bedienungsanleitung
Boyo
Boyo VTM43TCA Bedienungsanleitung
Boyo
Boyo VTC464RB Bedienungsanleitung
Boyo
Boyo VTX400 Bedienungsanleitung
Boyo
Boyo VTX3600 Bedienungsanleitung
Boyo
Boyo VTL375HD Bedienungsanleitung
Boyo
Boyo VTC700R Bedienungsanleitung
Boyo
Boyo VTC461 R Bedienungsanleitung
Boyo
Boyo VTL275HDL Bedienungsanleitung
Boyo
Boyo VTL17AI Bedienungsanleitung
