Applies when using the caravan mirror for
the first time
The caravan mirrors must always be adjusted
so that optimal settings are obtained based
on prevailing conditions.
Take care not to scratch the paintwork.
EN Caravan mirror
Installing
6
─Adjust the angle and the tension of the spring
according to section Settings.
─Check that the mountings are parallel with the
edge of the wing so that they are not trapped
when the bonnet is closed.
─Close the bonnet carefully to prevent
damaging the mountings or bonnet edge.
─Check that the rearview mirror is fitted
securely. If there is play between the edge of
the wing and the edge of the bonnet then
loosen the retaining nuts (1). Turn the
brackets, with the bonnet closed, so that they
touch both the edge of the wing and the edge
of the bonnet at the same time. Then tighten
the nuts again.
CAUTION
CAUTION
