BrainCo STEM Kit Bedienungsanleitung
BrainCo STEM Kit
Assembly
Instructions
1
Parts List
Item
Number
Control box plates
6
Servo board
1
Screws
20(+2)
Front wrist
1
Back wrist
1
Front Palm
1
Back Palm
1
Wire Plate
1
Red finger hinges
14
Finger pieces
14
IR remote
1
IR sensor
1
Jumper wires
25
Microcontroller
1
9V battery
1
Servo motors
5
Fishing wires
1
Breadboard
1
2
Section 1:
Building the
Hand
3
The finger pieces are grouped according to their
markings on the top.
For example, all parts for the index finger have
“2” marked on the parts.
4
5
6
Insert a fishing wire in the thumb starting from
the bottom, and follow the green arrows.
Pull both wires on the bottom and make sure
they have the same length.
7
8
Insert a fishing wire in the index finger starting
from the bottom, and follow the green arrows.
Pull both wires on the bottom and make sure
they have the same length.
9
10
Insert a fishing wire in the middle finger starting
from the bottom, and follow the green arrows.
Pull both wires on the bottom and make sure
they have the same length.
Andere Handbücher für STEM Kit
1
Inhaltsverzeichnis
Andere BrainCo Spielzeug Handbücher
