BrainLit Alven Bedienungsanleitung
User Manual · BrainLit Alven™
2
WARNINGS/NOTIFICATIONS
• Please keep this User Manual and all related documents for future reference.
You can also find information about this product and related services on our
website www.brainlit.com.
• If your BrainLit Alven or any part of it is not functioning as intended, please
contact the party you purchased BrainLit Alven from. Do not attempt to servi-
ce, replace, or modify any part of BrainLit Alven yourself. BrainLit Alven should
only be serviced by an authorized BrainLit service technician.
• BrainLit Alven weighs more than 20kg/44lbs. We recommend that assembly
and moving of BrainLit Alven be handled by two people.
• BrainLit Alven is intended for indoor use only.
• For further safety information, please refer to Section 5.2 of this User Manual.
SAFETY INSTRUCTIONS
Before you use this device for the first time, please read the following notes in this
manual and heed all warnings, even if you are familiar with handling electronic
devices. Keep this manual safe for future reference. If you sell the device or pass it
on, it is essential that you also hand over this manual.
This icon denotes important information for the safe operation for the
product and for the user’s safety.
This icon denotes further information on the topic.
Thank you for choosing BrainLit Alven™. If you have any questions that are not
covered in this manual, please get in touch with us for further assistance.
Alternatively, visit our website for more information.
Contact:
info@brainlit.com
www.brainlit.com/brainlit-alven
CONTENTS
1. Product information
1.1 Product overview
2. Assembly
2.1 Before assembly
2.2 Assembly instructions
3. Operation
3.1 Manual operation
3.2 Operating instructions
3.3 Care & cleaning
3.4 Troubleshooting
4. Disclaimers
4.1 Data protection
4.2 Warranty & safety
4.3 Conformity
4.4 Repackaging, transportation & storage
4.5 Disposal
User Manual · BrainLit Alven™
3
.................................................................................................................................. p.4
..................................................................................................................................... p.5
..................................................................................................................... p. 6
............................................................................................................................. p.9
........................................................................................................................ p.12
..................................................................................................................................... p.13
................................................................................................................................... p.14
...................................................................................................................................... p.15
........................................................................................................................... p.16
.............................................................................................................................................. p.19
................................................................................... p.20
................................................................................................................................................... p.21
About BrainLit Alven™
Light affects all species on Earth, especially humans. Evolution has
made the natural variation of light essential for humankind, a need that
hasn’t changed despite the changes in our behavior.
Today most people spend 21 out of the day’s 24 hours indoors, exposed
to static and insufficient light. There are many well-documented and
scientifically supported negative consequences stemming from expo-
sure to poor light and how the lack of daylight affects our biology. These
were the premises that led to the founding of BrainLit and the invention
of BioCentric Lighting™ (BCL).
BrainLit Alven™ is the world’s first personal, connected, dynamic and
free-standing LED luminaire-powered BioCentric Lighting™ system.
It is a multi-user system and can also be connected to the BrainLit cloud.
BrainLit’s BioCentric Lighting™ creates an optimal natural lighting en-
vironment, with proper variations of light intensity and color at the right
time of the day, synchronizing the body’s circadian rhythm and the pro-
duction of the necessary hormones (e.g., cortisol and melatonin) to keep
your body system in balance.
The AutoLit recipe is the default setting that best helps you maintain
your circadian rhythm. To maintain your normal circadian rhythm, you
should use AutoLit as often as possible.
To learn more about the benefits of BioCentric Lighting™ please visit our
website www.brainlit.com.
1.1
PRODUCT OVERVIEW
User Manual · BrainLit Alven™
4
2.1
BEFORE ASSEMBLY
User Manual · BrainLit Alven™
A 1x Alven luminaire
B 1x Alven pole
C 1x Alven foot
D 8x Assembly bolts
E 1x Torx key (T45)
F 1x Power cord
G 1x Documents
ACB
D
E
F
G
5
1. Remove all packaging materials.
2. Unpack and inspect all components.
3. Lay out all parts on a flat surface.
- User manual
- Quick guide
BOX 1 BOX 2 BOX 3
Two people recommen-
ded for assembling and
moving your Alven
For indoor use only
F The flexible cable or cord may be specially prepared and only available from the
manufacturer or his service agent. (Power cord type IEC C13 to NEMA 5-15, UL approved)
User Manual · BrainLit Alven™
NOTE: Please take care not to pinch or damage the wires.
STEP 2
Attach luminaire to pole
Connect the wire and quick connector
from the luminaire (A) with the
matching connector from the pole (B),
making sure they are firmly connected
and that the latching hooks have
connected properly.
Thread the luminaire (A) over the pole
(B) and make sure that all cables are
running free into the pole (B) and are
not pinched or damaged.
Attach the luminaire (A) to the top end
of the pole (B) with the remaining four
bolts (D) using the torx key (E).
Lay the pole (B) on a stool
or chair horizontally to avoid
damage, approximately 70
cm above floor as pictured
below.
Attach the foot (C) to the
bottom end of the pole (B)
with four of the eight bolts (D)
using the torx key (E).
STEP 1
Attach foot to pole
6
2.2 ASSEMBLY INSTRUCTIONS
C
B
D
E
B
C
A
B
D
E
STEP 2
Attach luminaire to pole
STEP 1
Attach foot to pole
User Manual · BrainLit Alven™
7
Raise your Alven to a standing
position with its foot on the floor.
Insert the power cable (F), first to your
Alven and then to the wall outlet.
It will take about 2 minutes for your
Alven to start once the power cord
has been connected. Alven can be
connected to a network using wifi or
an ethernet cable (not provided).
The flexible cable or cord may be
specially prepared and only available
from the manufacturer or his service
agent.
Do NOT connect to a Power over
Ethernet (PoE) connection. This device
is not PoE compatible.
Use the power button to power your
Alven On/Off.
Do not look directly into BrainLit
Alven’s light. It is brighter than a
normal lamp and may cause
discomfort.
For more features, see instructions
in section 3.1 of this user manual or
in the BrainLit app.
STEP 4
Start system
STEP 3
Connect power
F
User Manual · BrainLit Alven™
Complete the setup of your Alven
by downloading the BrainLit app
from the App Store or Google Play
Store and follow the instructions.
STEP 5
Complete set up
8
You’re all set!
Welcome to the world of
BioCentric Lighting™.
STEP 5
Complete set up
LONG press
LONG press
Power
LONG press Power
Toggle ON
Toggle OFF
RAL 9016
Transparent
Pantone 281 C
Matte nish
Colour print information
Print
RAL 9016
Transparent
Pantone 281 C
Matte nish
Colour print information
Print
RAL 9016
Transparent
Pantone 281 C
Matte nish
Colour print information
Print
3.1
MANUAL OPERATION
Light sensor
Adjust
brightness
= Continuous
brightening
= Continuous
dimming
= Toggle On/Off
= Enables changing of
light settings
= Power LED is turned on
for 0,5 sec
= Power LED stays off
User Manual · BrainLit Alven™
9
Power LED status Bluetooth LED status Description Status
OFF -> Pulsing slowly OFF System starting Starting
Pulsing slowly -> OFF OFF System running Normal
usage
Blinks fast OFF Demo running Demo
ON Pulsing slowly Bluetooth pairing
possible
BT Pair
Blinks OFF Enables changing
of light settings
Command
Power
Power LED
Bluetooth LED
By default, BrainLit Alven™is in Auto-
Lit mode. To best maintain your natural
circadian rhythm, we recommend using
AutoLit as often as possible.
If you adjust the brightness of BrainLit
Alven using the (+) or (-) buttons on the
physical keypad, the BrainLit app, or
the online portal, you will exit the cur-
rent light mode (AutoLit, Realx, Boost)
and the light will remain at a static light
intensity until you either activate a light
mode again or you turn BrainLit Alven
off and back on. The color tempera-
ture of the light will still follow the last
selected light mode when setting static
intensity.
Normal Usage
AutoLit
The AutoLit mode is the default setting
that best helps you maintain your circa-
dian rhythm. The circadian rhythm is
referred to as our ”biological clock” that
regulates our well-being, alertness and
sleep.
To maintain your normal circdian rhythm
you should use AutoLit without dimming
the light intensity as often as possible.
If you adjust the brightness of BrainLit
Alven using the (+) or (-) buttons, you will
exit AutoLit and the light will remain at a
static light intensity until you turn
BrainLit Alven off and back on.
10
User Manual · BrainLit Alven™
Boost
Boost increases your alertness and sti-
mulates your cortisol levels, giving you a
refreshing effect. Recommended usage
is a 20 minutes or shorter ”light shower”
preferably during the first half of the day
(08.00-14.00).
Usage of Boost at night may disturb your
natural circadian rhythm. To maintain
your natural circadian rhythm, you should
use AutoLit without dimming the light in-
tensity as often as possible.
Relax
Relax creates a natural light environment
that feels more neutral to your eyes but
does not change dynamically and the-
refore has less impact on your circadian
rhythm. Recommended usage is for shor-
ter time periods after 14.00.
To maintain your circadian rhythm you
should use AutoLit without dimming the
light intensity as often as possible.
To activate AutoLit mode
Turn off, turn on => AutoLit
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec SHORT press Power =
mode changes to AutoLit
1LONG press
2SHORT press
To activate Relax mode
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec SHORT press =
scene changes to Relax
1LONG press
2SHORT press
To activate Boost mode
1. LONG press (3 sec) Power
2. Power LED blinks slowly
3. Within 7 sec SHORT press =
scene changes to Boost
1LONG press 2SHORT press
RAL 9016
Transparent
Pantone 281 C
Matte nish
Colour print information
Print
RAL 9016
Transparent
Pantone 281 C
Matte nish
Colour print information
Print
It may take a few days for your eyes to
adapt to the brightness of your
BrainLit Alven™.
Andere Handbücher für Alven
5
Inhaltsverzeichnis
Andere BrainLit Wohnraumbeleuchtung Handbücher
Beliebte Wohnraumbeleuchtung Handbücher anderer Marken
JONATHAN Y
JONATHAN Y JYL5019A Bedienungsanleitung
JONATHAN Y
JONATHAN Y JYL6007A Bedienungsanleitung
Philips
Philips Ledino 31606/11/16 Bedienungsanleitung
Salus
Salus UG600 Bedienungsanleitung
Safavieh Lighting
Safavieh Lighting CANDRI TBL4427A Bedienungsanleitung
Hunter
Hunter Bullet Spotlight Kit Gebrauchsanweisung
Schwaiger
Schwaiger NFL45 Bedienungsanleitung
FRITZ HANSEN
FRITZ HANSEN AQ01 PLUG-IN Bedienungsanleitung
MOOD
MOOD CORSIN JY-16 Bedienungsanleitung
Safavieh Lighting
Safavieh Lighting KREMP TBL4409A Bedienungsanleitung
JONATHAN Y
JONATHAN Y JYL8019 Bedienungsanleitung
XTRASUN
XTRASUN XTDEOKT1 Bedienungsanleitung