Brandt WFE0610K Bedienungsanleitung
WASHING MACHINE
USER MANUAL
THE CONTENTS
SECTION 1:BEFORE USING 2
•Safety warnings 2
•Recommendations 2
SECTION 2: INSTALLATION 3
•Removal of the transportation screws 3
•Adjustment of feet 3
•Electrical connection 4
•Water supply connection 4
•Water drain connection 5
SECTION 3:TECHNICAL SPECIFICATIONS 6
SECTION 4:CONTROL PANEL 7
•On/Off button 7
•Signal light 7
•Function buttons 7
•Temperature adjustment knob 8
•Program knob 8
SECTION 5:WASHING YOUR LAUNDRY 12
•Before washing 12
•Running the machine 13
SECTION 6:MAINTENANCE AND CLEANING 14
•Water inlet filters 14
•Pump filter 15
•Detergent drawer 16
•Siphon plug 17
•The cabinet 17
•The drum 17
•Remove of your machine from lime 17
SECTION 7: PRACTICAL INFORMATION 18
SECTION 8: AVOIDING MINOR FAULTS 19
SECTION 9:INTERNATIONAL WASHING SIGNS 23
1
SECTION 1:BEFORE USING
SAFETY WARNINGS
•Do not use a multiple socket or extension cord.
•Do not insert a plug with damaged or broken cord into the socket.
•If the cord is damaged it should be replaced by the manufacturer or
appointed service agent in order to avoid a hazard.
•Never remove the plug from the socket by pulling from the cord
section. Remove the plug by holding.
•Do not plug the power supply with wet hands.
•Never touch the machine with wet hands or feet.
•Never open the detergent drawer while the device is running.
•Never force to open the door of the machine while the machine is
running.
•Since the machine can reach high temperatures while running, do not
touch the drain hose and water during draining.
•In case of any failure, first unplug the device and close the water tap.
Do not attempt to repair.Please apply to the nearest authorized
service station.
•Do not forget that the packing material of your machine may be
hazardous for children.
•Do not let your children play with the washing machine.
•Keep your pet away from your machine.
•Your machine should only be used by adults within the information
written in this manual.
•Your machine is designed for use in house environment. Warranty
will be invalid if you use it for commercial purposes.
RECOMMENDATIONS
•The detergent or softener in contact with air for a long time will dry
and stick to your detergent drawer.To avoid this put your detergent
and softener into the detergent drawer just before washing.
•It is recommended that you use pre-washing program for only very
dirty clothes.
•Please do not exceed the maximum loading capacity.
2
•If you will not use your machine for a long time, unplug your machine,
close the water supply and leave the door open in order to keep the
inside of the machine dry and for prevention from unpleasant odour.
•As a result of the quality control procedures, a certain amount of
water may remain in your machine. This is not harmful for your
machine.
SECTION 2: INSTALLATION
You must pay attention to the following issues before using your washing
machine.
REMOVAL OF TRANSPORTATION SCREWS
•Transportation screws, which are located at the back side of the
machine, must be removed before running the machine.
•Loosen the screws by rotating counterclockwise by a suitable wrench.
(DIAGRAM-1)
•Remove the screws by pulling them.(DIAGRAM-2)
•The plastic parts located in the interior part of your machine will fall
down under the device.
•Lift your machine up slightly, pick up the plastic parts.
•If all of the plastic parts of screw groups have not fallen down; open
the door of your machine,move the drum until all plastic parts fall
down. Collect the parts that have fallen to the floor.
•To the holes where the transport screws have been removed, insert
the plastic transport screw taps found in the accessories bag.
(DIAGRAM-3)
•The transportation screws, that have been removed from the machine
should be kept in hand for any other transportation necessities.
DIAGRAM-2
DIAGRAM-1 DIAGRAM-3
ADJUSTMENT OF FEET
•Do not install your machine on rugs or similar surfaces.
•For your machine to work silently and without any vibration, it should
be settled on a flat, non-slippery and tough ground.
3
•You can adjust the balance of your machine from its feet.
•First, loosen the plastic adjustment nut.
•Adjust by rotating the feet upwards or downwards.
•After the balance has been reached, tighten the plastic adjustment
nut again by rotating it upwards.
•Never put cartons, wooden blocks or similar materials under the
machine to balance the irregularities on the level of the ground.
ELECTRICAL CONNECTION
•Your washing machine works with 220-240V and 60Hz.
•A special grounded plug has been attached to the network cable of
your washing machine. This plug must definitely be inserted to a
grounded socket with 10 ampere. The fuse flow value of the
electricity line attached to this should also be 10 ampere. If you have
no such sockets and fuses in your house, let it be made by a qualified
electrician.
•Our company will not be responsible for any damages that may
occur as a result of usage without grounding.
WATER SUPPLY CONNECTION
•Your machine has a single water (cold) inlet.
•To prevent from the leakages on the connection joints, 1 seal is
included in the hose packing.(Fit this seal on the end of the water
inlet hose at the tap side.)
•Connect the end with bracket of the water inlet hose to the water inlet
valve at the rear of the machine and the other end to your tap. In
situations where you are not assured, let a qualified plumber make
the connection works.
•Water pressure of 1-10 bars from your tap will enable your machine
to work more efficiently.(1 bar pressure means water flow of more
than 8 liters in 1 minute from a fully opened tap).
•After connections are completed, check for the non-leakage of the
connection joints by turning on your tap completely.
•Be sure that water inlet hoses are not folded, broken or crushed.
•Mount the water inlet hoses to a 3”/4, geared water tap.
4
Cold water inlet
WATER DRAIN CONNECTION
•Be sure that water inlet hoses are not folded, twisted, crushed or
elongated by stretching.
•Water drain hose should be mounted at a height of minimum 60 cm,
maximum 100 cm from the ground.
•The end of the water drain hose may directly be fitted to the dirty
water outlet hole or a special apparatus mounted on the outlet
bracket of the wash-stand.
•Never attempt to extend the water drain hose by adding extra parts.
5
SECTION 3:TECHNICAL SPECIFICATIONS
Maximum dry laundry capacity (kg) 5
Recommended loading (kg) 4,5
Height (cm) 85
Width(cm) 59,6
Depth (cm) 54
1 2 3
4
5
6
7
1-Top 5-Handle
2-Detergent drawer 6-Filter cover
3-Control panel 7-Kickplate
4-Door
6
SECTION 4:CONTROL PANEL
1 2 3 4
5 6
1-Detergent drawer 4-Program knob
2-Signal light 5-On/Off button
3-Temperature adjustment knob 6-Function buttons
ON/OFF BUTTON
Used to turn on and to shut off your machine and to start the
selected program.
WARNING!
Your machine should be in shut off status before selecting a
program or changing a continuing program.
SIGNAL LIGHT
It turns on when the on/off button is pressed and indicates that
your machine is ready to wash. It turns off when the on/off button
is repressed.
FUNCTION BUTTONS
Half load
By using this function, you can wash your clothes using less
energy and water.You must load your machine with half or less
than half of the quantity of clothes indicated in Table-1(see Pages
10-11) When this function is used, half of the quantity
recommended by the detergent producers should be used.
7
No spin
This program is recommended to be used for your sensitive
clothes which should not be spinned.By pressing this function
button, you prevent the spinning process which is included in the
program.
TEMPARATURE ADJUSTMENT KNOB
By the temparature adjustment knob, you can adjust the washing water
temparature of your clothes between (cold wash) and 90 °C. When you are
selecting the washing water temparature, pay attention to the international
washing signs on your clothes.
PROGRAM KNOB
By the program knob, you can select the program in which you desire to wash
your clothes. You can adjust the program selection process by rotating the
program knob clockwise. If your turn the reverse direction, you may give
damage to your machine.You must be careful that the adjustment sign comes
exactly on the program you wish to select. While your machine is running, the
program knob rotates automatically and follows the program steps. Do not
turn the program knob while the program is in operation. You may damage
your machine.
8
I Off
1 Cotton 90°(Prewash)
2 Intensive 90°
3 Normal 60°
4 Delicate 40°
5 Eco 30°
6 Synthetic intensive 60°
7 Synthetic normal 50°
8 Delicate normal 40°
9 Wool normal 40°
Softening
Rinsing
Spinning
Draining
9
Inhaltsverzeichnis
Andere Brandt Waschmaschine Handbücher
Brandt
Brandt WTC1233K Bedienungsanleitung
Brandt
Brandt wfb190wa Kurzanleitung
Brandt
Brandt wbf1126k Bedienungsanleitung
Brandt
Brandt WFB104QWA Kurzanleitung
Brandt
Brandt BWF612WWE Bedienungsanleitung
Brandt
Brandt WTC9670 Bedienungsanleitung
Brandt
Brandt BT653MA Bedienungsanleitung
Brandt
Brandt WFK1018A Bedienungsanleitung
Brandt
Brandt BWD8614AG Bedienungsanleitung
Brandt
Brandt BT608LA Bedienungsanleitung
Brandt
Brandt WTC96100 Bedienungsanleitung
Brandt
Brandt BT712HQA Kurzanleitung
Brandt
Brandt WFH 1171 U Bedienungsanleitung
Brandt
Brandt BWF710AX Bedienungsanleitung
Brandt
Brandt BWF514I Bedienungsanleitung
Brandt
Brandt WFB183QWA Kurzanleitung
Brandt
Brandt BWF814AG Bedienungsanleitung
Brandt
Brandt Washing machine Bedienungsanleitung
Brandt
Brandt WFB124QWA Kurzanleitung
Brandt
Brandt Washing machine Bedienungsanleitung
